reset TOYOTA C-HR 2019 Owners Manual (in English)

15
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Multi-Information Display (MID)
Steering wheel switchesMulti-Information Display (MID)
Previous screen
Enter/set
Select
Use the the steering wheel meter control switches to operate the MID. Se\
e
above.
Driving mode select
“NORMAL w4VJUBCMFGPSDJUZESJWJOH
“SPORTw4VJUBCMFGPSSPBETXJUINBOZDVSWFTOFFEJOHJNQSPWFEESJWJOHSFTQPOTF
“ECOw4VJUBCMFGPSJNQSPWFEGVFMFDPOPNZBOEFOFSHZTBWJOHDPOUSPMMFEBJS
heating.

1SFTTTUFFSJOHXIFFMTXJUDIFTi
wUPGJOEBOETFMFDU in the MID.


1SFTTTUFFSJOHXIFFMTXJUDIFT “
wTXJUDIFTBOETFMFDUi%SJWF.PEFwJOUIF.*%

4FMFDUBESJWJOHNPEF
5IFi41035wBOEi&$0wJOEJDBUPSTEJTQMBZJOUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%

Note: Operation of the LDA system and setting adjustments continues in t\
he same
condition regardless of Ignition cycle until changed by the driver or th\
e system is reset.
Refer to the Owner’s Manual for more settings and customizable featur\
es.
Push MID control switches to view or change information in the following\
:
/BWJHBUJPOTZTUFNMJOLFEEJTQMBZ JGFRVJQQFE
Driving information
Driving assist system information
Audio system-linked display
Warning message display
Settings display

28
The LDA w/SA function
displays when the Multi-Information Display (MID) is
switched to the driving assist system information screen.
(1) The system displays solid white lines on the LDA indicator when visible \
lane
markers on the road are detected. A side flashes orange to alert the dri\
ver when the
vehicle deviates from its lane.
(2) The system displays outlines on the LDA indicator when lane markers on t\
he
road are not detected or the function is temporarily cancelled.
Note: When operational conditions are no longer met, the function may be\

temporarily canceled. However, when the operational conditions are met a\
gain,
operation of the function is automatically restored. For example, LDA w/\
SA
may not function on the side(s) where white/yellow lines are not detec\
table.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
LANE DEPARTURE ALERT (CONTINUED)
DISABLING STEERING ASSIST
(1) Press “” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select the Steering Assist function and then
press “
”.
(3) Press “
” each time to change the setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LDA w/SA system and setting adjustments continues\
in
the same condition regardless of Ignition cycle until changed by the dri\
ver or
the system is reset.
TOYOTA SAFETY SENSE™
ADJUSTING LDA ALERT SENSITIVITY
The driver can adjust the sensitivity of the LDA (warning) function fr\
om the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front tire crosses the
lane marker.
Normal - Is designed to warn approximately when the front tire crosses
the lane marker.
(1) Press “
” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select the Alert function and then press
“
” to set sensitivity to Normal or High.
(3) Press “
” each time to change the setting.
(4) Press “
” to go back to the menu.

29
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
48":8"3/*/(4:45&.
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\
displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.

1SFTTiwTXJUDIFTUPGJOEBOETFMFDU.

 Press “
w switches to find the Steering Assist function and then press
“
w

1SFTTi
wFBDIUJNFUPDIBOHFUIFTFUUJOH

1SFTTi
wUPHPCBDLUPUIFNFOV

1SFTTi
wTXJUDIFTUPGJOEBOETFMFDU.

 Press “
w switches to find the Steering Assist function and then press
“
w

1SFTTi
wFBDIUJNFUPDIBOHFUIFTFUUJOH

1SFTTi
wUPHPCBDLUPUIFNFOV
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
"%+645*/(48":"-&354&/4*5*7*5:
%*4"#-*/(-%"48":8"3/*/(4:45&.

31
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
ADJUSTING DISTANCE
To change the vehicle-to-
vehicle distance
Push the “
” button
to cycle through the
settings, which will change
progressively.
This mode employs a radar sensor to detect the presence of vehicles up t\
o
approximately 328ft (100m) ahead, determines the current vehicle-to-ve\
hicle
following distance and operates to maintain a preset following distance \
from the
vehicle ahead. These distances vary based on vehicle speed.
Note: Vehicle-to-vehicle distance will close in when traveling on long d\
ownhill
slopes.
MIDDLE SHORT
(default setting)
LONG
Preceding vehicle
mark
(1)Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-\
to-
vehicle distance can also be set by operating the vehicle-to-vehicle dis\
tance
control.
(2) Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automaticall\
y
decelerates your vehicle. When a greater reduction in vehicle speed is
necessary, the system applies the brakes (the brake lights will come on\
at this
time). The system will respond to changes in the speed of the vehicle a\
head
in order to maintain the vehicle-to-vehicle distance set by the driver. \
A warning
tone warns you when the system cannot decelerate sufficiently to prevent\
your
vehicle from closing in on the vehicle ahead.
(1) (2) (3)
ADJUSTING DISTANCE (CONTINUED)