windshield wipers TOYOTA COROLLA iM 2018 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2018, Model line: COROLLA iM, Model: TOYOTA COROLLA iM 2018Pages: 384, PDF Size: 6.57 MB
Page 3 of 384

3
1
8 7
6
5
4
3
2
9
COROLLA iM_U (OM12M42U)4-1. Before driving
Driving the vehicle ............. 110
Cargo and luggage............ 120
Vehicle load limits ............. 123
Trailer towing..................... 124
Dinghy towing (vehicles with a
continuously variable
transmission)................... 125
Dinghy towing (vehicles with a manual
transmission)................... 126
4-2. Driving procedures Engine (ignition) switch ..... 128
Continuously variable transmission .................... 131
Manual transmission ......... 137
Turn signal lever................ 139
Parking brake .................... 140
4-3. Operating the lights and wipers
Headlight switch ................ 141
Windshield wipers and washer ............................ 145
Rear window wiper and washer ............................ 147
4-4. Refueling Opening the fuel tank cap .......................... 149 4-5. Using the driving
support systems
Toyota Safety Sense C...... 153
PCS (Pre-Collision System)..... 159
LDA (Lane Departure Alert)..... 172
Automatic High Beam ........ 177
4-6. Using the driving support systems
Cruise control .................... 181
Driving assist systems ........................... 186
4-7. Driving tips Winter driving tips .............. 192
5-1. Using the air conditioning system
and defogger
Automatic air conditioning system ......... 196
5-2. Using the interior lights Interior lights list................. 203
• Front interior light/front personal lights ............... 204
• Rear interior light ........... 205
• Vanity lights ................... 205
4Driving
5Interior features
Page 13 of 384

13Pictorial index
COROLLA iM_U (OM12M42U)Windshield wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 145
Precautions for winter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 192
Fuel filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 149
Refueling method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 149
Fuel type/fuel tank capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 326
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 250
Tire size/inflation pressure . . . . . . . . . . . . . . . . . . . . . . . . . P. 331
Winter tires/tire chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 192
Checking/rotation/tire pressure warning system . . . . . . . . . P. 250
Coping with flat tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 303
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 235
Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 235
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 326
Coping with overheating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 318
Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 141
Parking lights/daytime running lights . . . . . . . . . . . . . . . . . P. 141
Front side marker lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 141
Front turn signal lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 139
Stop lights/tail lights/rear side marker lights/
rear turn signal lights . . . . . . . . . . . . . . . . . . . . . . . . . . P. 139, 141
Tail lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 141
Back-up lights
Shifting the shift lever to R . . . . . . . . . . . . . . . . . . . . . . . . P. 131, 137
License plate lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 141
4
5
6
7
Light bulbs of the exterior lights for driving
(Replacing method: P. 272, Watts: P. 332)
8
9
10
11
12
13
14
Page 109 of 384

109
4Driving
COROLLA iM_U (OM12M42U)4-1. Before driving
Driving the vehicle ............. 110
Cargo and luggage ........... 120
Vehicle load limits ............. 123
Trailer towing..................... 124
Dinghy towing (vehicles with a
continuously variable
transmission)................... 125
Dinghy towing (vehicles with a manual
transmission)................... 126
4-2. Driving procedures Engine (ignition) switch ..... 128
Continuously variable transmission .................... 131
Manual transmission ......... 137
Turn signal lever................ 139
Parking brake .................... 140 4-3. Operating the lights
and wipers
Headlight switch ................ 141
Windshield wipers and washer ............................ 145
Rear window wiper and washer ............................ 147
4-4. Refueling Opening the fuel tank cap .......................... 149
4-5. Using the driving support systems
Toyota Safety Sense C ..... 153
PCS (Pre-Collision System) .... 159
LDA (Lane Departure Alert) .... 172
Automatic High Beam ....... 177
4-6. Using the driving support systems
Cruise control .................... 181
Driving assist systems ...... 186
4-7. Driving tips Winter driving tips ............. 192
Page 143 of 384

1434-3. Operating the lights and wipers
4
Driving
COROLLA iM_U (OM12M42U)
■Daytime running light system
●The daytime running lights illuminate using the same lights as the parking
lights and illuminate brighter than the parking lights.
● To make your vehicle more visible to other drivers during daytime driving,
the daytime running lights turn on automatically when all of the following
conditions are met. (The daytime running lights are not designed for use at
night.)
• The engine is running
• The parking brake is released
• The headlight switch is in the (type B only), or “AUTO”
*
position
*: When the surroundings are bright
The daytime running lights remain on after they illuminate, even if the parking
brake is set again.
● For the U.S.A.: Daytime running lights can be turned off by operating the
switch.
● Compared to turning on the headlights, the daytime running light system
offers greater durability and consumes less electricity, so it can help improve
fuel economy.
■ Headlight control sensor
The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the
windshield.
Doing so interferes with the sensor
detecting the level of ambient light and
may cause the automatic headlight sys-
tem to malfunction.
Page 145 of 384

1454-3. Operating the lights and wipers
4
Driving
COROLLA iM_U (OM12M42U)
The wiper operation is selected by moving the lever as follows. When
intermittent windshield wiper operati on is selected, the wiper interval
can be also adjusted.
*1 or *2
Intermittent windshield
wiper operation
*1 or *2
Low speed windshield
wiper operation
*1 or *2
High speed windshield
wiper operation
*1 or *2
Temporary operation
*1:For U.S.A.
*2: For Canada
Wiper intervals can be adjusted when intermittent operation is
selected.
Increases the intermittent wind-
shield wiper frequency
Decreases the intermittent
windshield wiper frequency
Windshield wipers and washer
Operating the wiper lever
1
2
3
4
5
6
Page 146 of 384

1464-3. Operating the lights and wipers
COROLLA iM_U (OM12M42U)
Washer/wiper dual operation
Wipers will automatically operate a
couple of times after the washer
squirts.
■The windshield wiper and washer can be operated when
The engine switch is in the “ON” position.
■ If no windshield washer fluid sprays
Check that the washer nozzles are not blocked if there is washer fluid in the
windshield washer fluid reservoir.
7
WARNING
■Caution regarding the use of washer fluid
When it is cold, do not use the washer fluid until the windshield becomes
warm. The fluid may freeze on the windshield and cause low visibility. This
may lead to an accident, resulting in death or serious injury.
NOTICE
■When the windshield is dry
Do not use the wipers, as they may damage the windshield.
■ When the washer fluid tank is empty
Do not operate the switch continually as the washer fluid pump may over-
heat.
■ When a nozzle becomes blocked
In this case, contact your Toyota dealer.
Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 147 of 384

1474-3. Operating the lights and wipers
4
Driving
COROLLA iM_U (OM12M42U)
The wiper operation is selected by moving the lever as follows:
*1 or *2
Intermittent window
wiper operation
*1 or *2
Normal window wiper
operation
*1:For U.S.A.
*2: For Canada
Washer/wiper dual operation
The wiper will automatically oper-
ate a couple of times after the
washer squirts.
■The rear window wiper and w asher can be operated when
The engine switch is in the “ON” position.
■ If no windshield washer fluid sprays
Check that the washer nozzle is not blocked if there is washer fluid in the
windshield washer fluid reservoir.
Rear window wiper and washer
Operating instructions
1
2
3
Page 157 of 384

1574-5. Using the driving support systems
4
Driving
COROLLA iM_U (OM12M42U)
WARNING
■To avoid malfunction of the front sensor
Observe the following precautions.
Otherwise, the front sensor may not operate properly, possibly leading to an
accident resulting in death or serious injury.
● Keep the windshield clean at all times. If the windshield is dirty or covered
with an oily film, water droplets, snow, etc., clear the windshield. If the
inner side of the windshield in front of the front sensor is dirty, contact your
Toyota dealer.
● If there is a large difference in temperature between the inside and outside
of the vehicle, such as in winter, the windshield is likely to fog up easily. If
the part of the windshield in front of the front sensor is fogged up or cov-
ered with condensation or ice, the PCS warning light may illuminate and
the system may be temporarily disabled. In this case, use the windshield
defogger to remove the fog, etc. ( →P. 199)
● If the area of the windshield in front of the front sensor is covered with
water droplets, use the windshield wipers to remove them.
If the water droplets are not sufficiently removed, the performance of the
front sensor may be reduced.
●Do not attach objects, such as stickers,
transparent stickers, etc., and so forth,
to the outer side of the windshield in
front of the front sensor (shaded area in
the illustration).
A: From the top of the windshield to
approximately 4.0 in. (10 cm) below the
bottom of the front sensor
B: Approximately 7.9 in. (20 cm)
(Approximately 4.0 in. (10 cm) to the
right and left from the center of the front
sensor)
● Do not install or attach anything to the
inner side of the windshield under the
front sensor (shaded area in the illustra-
tion).
A: Approximately 4.0 in. (10 cm) (Start-
ing from the bottom of the front sensor)
B: Approximately 7.9 in. (20 cm)
(Approximately 4.0 in. (10 cm) to the
right and left from the center of the front
sensor)
Page 158 of 384

1584-5. Using the driving support systems
COROLLA iM_U (OM12M42U)
WARNING
●If water droplets cannot be properly removed from the area of the wind-
shield in front of the front sensor by the windshield wipers, replace the
wiper insert or wiper blade.
If the wiper inserts or wiper blades need to be replaced, contact your
Toyota dealer.
● Do not attach window tinting to the windshield.
● Replace the windshield if it is damaged or cracked.
If the windshield needs to be replaced, contact your Toyota dealer.
● Do not install an antenna in front of the sensor.
● Do not get the front sensor wet.
● Do not allow bright lights to shine into the front sensor.
● Do not dirty or damage the front sensor.
When cleaning the inside of the windshield, do not allow glass cleaner to
contact the lens. Also, do not touch the lens.
If the lens is dirty or damaged, contact your Toyota dealer.
● Do not subject the front sensor to a strong impact.
● Do not change the installation position or direction of the front sensor or
remove it.
● Do not disassemble the front sensor.
● Do not install an electronic device or device that emits strong electric
waves near the front sensor.
● Do not modify any components of the vehicle around the front sensor
(inside rear view mirror, sun visors, etc.) or ceiling.
● Do not attach any accessories that may obstruct the front sensor to the
hood, front grille or front bumper. Contact your Toyota dealer for details.
● If a surfboard or other long object is to be mounted on the roof, make sure
that it will not obstruct the front sensor.
● Do not modify the headlights or other lights.
● Do not attach anything to or place anything on the dashboard.
■ Installation area of front sensor on windshield
When the windshield is fogging up easily, the glass around the front sensor
may be hot due to the heater running. If the glass is touched, it may re\
sult in
burns.
Page 222 of 384

2226-1. Maintenance and care
COROLLA iM_U (OM12M42U)
NOTICE
■To prevent paint deterioration and corrosion on the body and compo-
nents (aluminum wheels etc.)
● Wash the vehicle immediately in the following cases:
• After driving near the sea coast
• After driving on salted roads
• If coal tar or tree sap is present on the paint surface
• If dead insects, insect droppings or bird droppings are present on the
paint surface
• After driving in an area contaminated with soot, oily smoke, mine dust, iron powder or chemical substances
• If the vehicle becomes heavily soiled with dust or mud
• If liquids such as benzene and gasoline are spilled on the paint surface
● If the paint is chipped or scratched, have it repaired immediately.
● To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing the wheels.
■ Cleaning the exterior lights
● Wash carefully. Do not use organic substances or scrub with a hard brush.
This may damage the surfaces of the lights.
● Do not apply wax to the surfaces of the lights.
Wax may cause damage to the lenses.
■ To prevent damage to the windshield wiper arms
When lifting the wiper arms away from the windshield, pull the driver side
wiper arm upward first, and then the passenger side. When returning the
wipers to their original position, do so from the passenger side first.
■ When using a high pressure car wash
Do not bring the nozzle tip close to boots (rubber or resin manufactured
cover), connectors or the following parts. The parts may be damaged if they
come into contact with high-pressure water.
• Traction related parts
• Steering parts
• Suspension parts
• Brake parts