lock TOYOTA LAND CRUISER 2012 Owners Manual

541 4-3. Do-it-yourself maintenance
4
Maintenance and care
L/C200_EE (OM60G38E)Under the instrument panel (type A)
FuseAmpereCircuit
1 CIG 15 A Cigarette lighter
2 BK/UP LP 10 A Back-up lights, trailer
3ACC 7.5 AAudio system, parking assist sys-
tem, multi-display assembly, main
body ECU, mirror ECU, smart entry
& start system, clock
4 PANEL 10 AFour-wheel drive system, ashtray,
cigarette lighter, cool box, cruise
control, center differential lock,
multi-display assembly, seat
heater, air conditioning system,
glove box light, emergency flash-
ers, audio system, headlight
cleaner switch, headlight leveling
dial, power heater, driving position
memory system, outside rear view
mirror switches, overhead module,
roll sensing of curtain shield air-
bags off switch, shift lever switch,
steering switches, VSC OFF
switch, console switch, PANEL
RLY

542 4-3. Do-it-yourself maintenance
L/C200_EE (OM60G38E)
5 ECU-IG NO.2 10 AAir conditioning system, heater,
overhead module, ABS, VSC,
steering sensor, yaw rate & G sen-
sor, main body ECU, stoplights,
moon roof, clock, EC mirror
6 WINCH 5 A No circuit
7 A/C IG 10 ACool box, condenser fan, cooler
compressor, rear window and out-
side rear view mirror defoggers, air
conditioning system
8TAIL 15 ATail lights, license plate lights, front
fog lights, rear fog light, trailer, front
position lights
9 WIPER 30 A Windshield wiper
10 WSH 20 A Windshield washer
11 RR WIPER 15 A Rear window wiper and washer
12 4WD 20 A Four-wheel drive system
13 LH-IG 5 AAlternator, seat heater, windshield
wiper de-icer, front seat belt, emer-
gency flasher, shift lever switch
14 ECU-IG NO.1 5 AABS, VSC, tilt and telescopic steer-
ing, gateway ECU, shift lock sys-
tem, parking assist system, cruise
control system, pre-crash safety,
trailer, headlight cleaner, multi-dis-
play assembly, rain-sensing wind-
shield wipers, driving position
memory system, power door lock
system
15 S/ROOF 25 A Moon roof
FuseAmpereCircuit

544 4-3. Do-it-yourself maintenance
L/C200_EE (OM60G38E)Under the instrument panel (type B)
FuseAmpereCircuit
1 RSF LH 30 A No circuit
2 B/DR CLSR RH 30 A Back door closer
3 B/DR CLSR LH 30 A Back door closer
4 RSF RH 30 A No circuit
5 DOOR DL 15 A Double locking system
6 AHC-B 20 A 4-Wheel AHC
7 TEL 5 A Multimedia
8 TOW BK/UP 7.5 A No circuit
9 AHC-B NO.2 10 A 4-Wheel AHC
10 ECU-IG NO.4 5 A VGRS, 4-Wheel AHC
11 SEAT-A/C FAN 10 A Ventilators
12 SEAT-HTR 20 A Seat heater
13 AFS 5 A No circuit
14 ECU-IG NO.3 5 A Head LP auto leveling
15 STRG HTR 10 A Heated steering system
16 TV 10 A Multi-display assembly

548 4-3. Do-it-yourself maintenance
L/C200_EE (OM60G38E)
Replacing light bulbs
Headlight high beams
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
STEP1
ITY43C041
STEP2

550 4-3. Do-it-yourself maintenance
L/C200_EE (OM60G38E)Front fog lights (if equipped)
Remove the fender liner bolts,
loose the fender liner nut and
remove the fender liner.
Fender liner bolts
Fender liner nut
Unplug the connector while
depressing the lock release.
Turn the light bulb counterclock-
wise.
STEP1
STEP2
STEP3

552 4-3. Do-it-yourself maintenance
L/C200_EE (OM60G38E)Front turn signal lights
For the left side only: Remove
the securing bolt and move the
washer fluid filler opener.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
ITY43C012
STEP1
STEP2
STEP3
STEP4

553 4-3. Do-it-yourself maintenance
4
Maintenance and care
L/C200_EE (OM60G38E)Back-up lights
Open the back door and remove
the nuts and lamp assembly.
Remove the cover.
Unclip the connector wire and
turn the bulb bases counter-
clockwise.
STEP1
STEP2
STEP3

555 4-3. Do-it-yourself maintenance
4
Maintenance and care
L/C200_EE (OM60G38E)Rear turn signal lights
Open the back door and remove
the bolts and lamp assembly.
Use a cloth to prevent scratches.
Unclip the connector wire.
Turn the bulb bases counter-
clockwise.
STEP1
STEP2
STEP3

557 4-3. Do-it-yourself maintenance
4
Maintenance and care
L/C200_EE (OM60G38E)Rear fog lights
Remove the under cover bolt
and pull down the under cover.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
STEP1
STEP2
ITY43C065
STEP3
STEP4

558 4-3. Do-it-yourself maintenance
L/C200_EE (OM60G38E)License plate lights
Open the back door and remove
the license plate light unit.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
STEP1
ITY43C067
STEP2
ITY43C068
STEP3
STEP4