TOYOTA PRIUS 2006 2.G Navigation Manual

31
SELECTING FROM THE NEAREST 5
CITIES
1. Touch “Nearest 5 Cities”.
2. Touch the button of the desired city
name.
SELECTING FROM THE LAST 5 CITIES
Touch
the button of the desired city name.
If the navigation has not be used, no cities will
be displayed on the screen. (b) Selecting from the categoriesTouch “Category”.
If the desired POI category is on the screen,
touch
the name to display a detailed list of the
POI category.
If the desired POI category is not on the
screen, touch “List All Categories” to list all
POI categories.

32
When the desired category is touched, the
POI name list screen or POI name input
screen is displayed.
— Destination search by “POI
Category”
The destination can be set by selecting the
search point and the POI category.
Touch “POI Category” on the “Destina-
tion” screen.
Set the search point by the following
method:
1. Input the city center
2. Set the current position as the searchpoint
3. Set the search point via the map screen
4. Set the search point from any destination
It is possible to display the names of POIs lo-
cated within approximately 20 miles (32 km)
from the selected search point. INPUTTING THE CITY CENTER
1. Touch “Input City Center”.
2. Input the city center name.
3. Touch the button of the desired city
center name.

33
When an arrow facing the desired point is
touched, the map scrolls in that direction. Re-
leasing the finger from the arrow will stop the
scrolling.
4. Touch “Enter”.
The search point is set and the “POI Catego-
ry” screen will be displayed. SETTING THE CURRENT POSITION AS
THE SEARCH POINT
Touch “Current Position”.
The search point is
set at the current position,
and the “POI Category” screen will be dis-
played. SETTING THE SEARCH POINT VIA THE
MAP SCREEN
1. Touch “Map”.
When an arrow facing the desired point is
touched,
the map scrolls in that direction. Re-
leasing the finger from the arrow will stop the
scrolling.
2. Touch “Enter”.
The search point is set and the “POI Catego-
ry” screen will be displayed.

34
SETTING THE SEARCH POINT FROM
DESTINATIONS
1. Touch the destination buttons at the
bottom of the screen.
When an arrow facing the desired point is
touched,
the map scrolls in that direction. Re-
leasing the finger from the arrow will stop the
scrolling.
2. Touch “Enter”.
The search point is set and the “POI Catego-
ry” screen will be displayed.
To search POIs near the search point
When the search point is set, the “POI Cate-
gory” screen will be displayed.
Select the desired POI categories.
“List”: If the desired POI categories have al-
ready been selected, a list of POI will be dis-
played from among the selected categories.
The selected category icon appears on the
top left of the screen.
If the desired POI category is not on the
screen, touch “List All Categories” to list all
POI categories.
Select the desired POI categories from the
list and touch “OK”.
The selected category icon appears on the
top left of the screen.

35
“Select Category”: To return to the POI
category selection screen.
“Show List”: To display the list of POIs in the
selected categories.By touching the button of the desired item, the
screen changes and displays the map loca-
tion of the selected destination and the route
preference. (See “Starting route guidance”
on page 40.)
The direction arrows of POIs are displayed
only when the current position is set as the
search point.
“On Route”: When the indicator is illumi-
nated by touching this button, the list of the
items searched along the route is displayed.
— Destination search by
“Emergency”
1. Touching “Emergency” on the “Des-
tination” screen.
The display changes to a screen to select po-
lice stations, dealers, hospitals or fire sta-
tions. While driving, only nearby police sta-
tions, dealers, hospitals, or fire stations are
shown. The current position is shown with an
address, and the latitude and the longitude at
the top of the screen.
2. Touch the desired emergency catego-
ry.
The selected emergency category list is dis-
played.

36
3. Touch the button of the desired des-
tination.
The screen changes and displays the map
location of the selected destination and the
route preference. (See
“Starting route guid-
ance” on page 40.)
INFORMATION
The navigation system does not guide in
areas where route guidance is unavail-
able. (See page 109.)
— Destination search by
“Memory”
1. Touch “Memory” on the “Destination”
screen.
A list of registered memory points is dis-
played. (To register or edit memory points,
see “My places” on page 70.)
2. Touch the button of your desired
memory point.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route guid-
ance” on page 40.)
— Destination search by
“Previous”
1. Touch “Previous” on the “Destination”
screen.
The previous starting point and up to 100 pre-
viously set destinations are displayed on the
screen.
2. Touch the button of the desired des-
tination.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route guid-
ance” on page 40.)

37
INFORMATION
The list of previous destinations can be
deleted when the vehicle is stopped.
(See “ — Deleting previous points” on
page 80.)
— Destination search by
“Map”
Touch “Map” on the second page of the
“Destination” screen.
The screen changes and displays the map
location that was previously displayed just
before the destination input operation and the
route preference. (See “Starting route guid-
ance” on page 40.)
INFORMATION
Guidance starts if “Enter” is touched
even while driving. However, the cursor
cannot be moved.
— Destination search by
“Intersection”
1. Touch “Intersection” on the second
page of the “Destination” screen.
2. Input the name of the two intersecting
streets which are located near the destina-
tion to be set.

38
3. Touch the button of the desired item.
After inputting the two intersecting streets,
the screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route guid-
ance” on page 40.)
If the same two streets cross at more than one
intersection, the screen changes and dis-
plays the menu to select the city name where
the streets intersect. Select the city, and the
map location of the selected destination and
the route preference. (See “Starting route
guidance” on page 40.)
— Destination search by
“Freeway Ent./Exit”
1. To input a freeway entrance or exit,
touch “Freeway Ent./Exit” on the second
page of the “Destination” screen.
Be sure to use the complete name of the free-
way or highway, including the hyphen, when
entering the destination. Freeways and inter-
states use an “I” (I −405). US highways use
the state designation before the number
(CA−118).

39
2. Select the desired freeway by touching
the button.
3. Either a freeway “Entrance” or “Exit”
can be selected.
4. Touch the button of the desired en-
trance or exit name.
The screen changes and displays the map
location of the selected destination and the
route preference. (See
“Starting route guid-
ance” on page 40.)
“Input Name”: An applicable list is displayed
by touching this button and inputting the
name.
— Destination search by
“Coordinates”
1. Touch “Coordinates” on the second
page of the “Destination” screen.
2. Input the latitude and the longitude.
3. When the input is finished, touch
“OK”.
By touching the button of the desired point,
the screen changes and displays the map
location of the selected destination and the
route preference. (See
“Starting route guid-
ance” on page 40.)

40
— Destination search by
“Phone #”
1. Touch “Phone #” on the second page
of the “Destination” screen.
2. Input a telephone number.
3. After inputting a telephone number,
touch “OK”.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route guid-
ance” on page 40.)
If there is more than one site having the same
number, the following screen will be dis-
played.
INFORMATION
If there is no match for the telephone
number inputted, a list of identical
numbers with different area codes
will be displayed.
 To set a memory point as a destina-
tion using the phone number, the
number must be registered previous-
ly. (See page 75.)
Starting route guidance
After inputting the destination, the screen
changes and d isplays the map location of the
selected destination and the route prefer-
ence.
1. When an arrow facing the desired
point is touched, the map scrolls in that di-
rection.
Releasing the finger from the arrow will stop
the scrolling.