Fig. 45: Aligning Drive Cable (1999 Celica)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Removal (2000 Celica)
1. Close sun roof. Turn ignition off. Remove door scuff plates. See Fig. 46 . Remove package tray trim.
Remove 4 bolts and rear seatback. Remove rear seat cushion. Remove side and center hinges. Remove
seatback lock striker. Remove luggage compartment tray. Remove luggage compartment mat. Remove 2
bolts, 2 hooks, 3 clips and rear deck trim cover.
2. Remove deck trim side panel. Remove rear seat outer belt floor anchors. Remove rear quarter trim panel.
Remove front seat outer belt shoulder anchor. Remove coat hook and rear pillar upper trim. Remove front
pillar trim. Remove kick panels. Remove front door opening trims. Remove map light cover and map
light assembly. Remove sun roof opening trim. Remove visors and holders. Remove 5 clips and
headlining.
3. Remove sun roof glass mounting nuts. See Fig. 47
. Pull upward on sun roof glass and remove. Remove
dome light bracket. Remove sun roof motor. Remove 4 drain hoses. Remove 12 bolts, 6 brackets, 4 nuts
and sun roof housing.
Disassembly & Reassembly
Remove sunshade stoppers. Remove sunshade trim. Remove 6 screws and front housing frame. Remove sun
roof drip channels. Pull drive cables rearward and remove. To reassemble, adjust drive cables to a completely
closed and tilted down position. Slide both cables forward or backward to align marks. See Fig. 49
. To
complete reassembly, reverse disassembly procedure.
Installation
Ensure rear seat outer belt floor anchors are installed as shown. See Fig. 48 . Tighten nuts and bolt to
specification. See TORQUE SPECIFICATIONS
. To complete installation, reverse removal procedure.
1999 Toyota RAV4
1999-2000 ACCESSORIES & EQUIPMENT Power Sun Roofs
Microsoft
Sunday, November 22, 2009 10:58:30 AMPage 61 © 2005 Mitchell Repair Information Company, LLC.
