TOYOTA SUPRA 1997 Service Repair Manual
SUPRA 1997
TOYOTA
TOYOTA
https://www.carmanualsonline.info/img/14/57469/w960_57469-0.png
TOYOTA SUPRA 1997 Service Repair Manual
Trending: fuses, clutch, coolant capacity, oil change, check transmission fluid, roof, service reset
Page 451 of 1807
mm in.
120 4.72
QUARTER WHEEL HOUSING OUTER PANEL
(ASSY): Sport Roof Right Side
REMOVAL (With the quarter panel removed.)
Cut and Join Location
Roof Side Inner to
Wheel Housing Brace
120 mm
Cut and Join Location
Rocker Panel Reinforcement
1. Cut the roof side inner to wheel housing brace
and the rocker panel reinforcement end at the
locations shown above. Remove the quarter
wheel housing outer panel.
BODY PANEL REPLACEMENTRE-44
Page 452 of 1807
INSTALLATION
Butt Weld
Assembly Mark
Butt Weld
1. Determine the position of the new parts by the
assembly marks of the inner and outer panels.
BODY PANEL REPLACEMENTRE-45
Page 453 of 1807
mm in.
120
4.72
QUARTER WHEEL HOUSING OUTER PANEL
(ASSY): Sport Roof Left Side
REMOVAL (With the quarter panel removed.)
Cut and Join Location
Roof Side Inner to heel
Housing Brace
120 mm
Rocker Panel
Reinforcement
Cut and Join
Location
1. Cut the roof side inner to wheel housing brace
and the rocker panel reinforcement end at the
location shown above. Remove the quarter
wheel housing outer panel.
BODY PANEL REPLACEMENTRE-46
Page 454 of 1807
INSTALLATION
Butt Weld
Assembly Mark
Butt Weld
1. Determine the position of the new parts by the
assembly marks of the inner and outer panels.
BODY PANEL REPLACEMENTRE-47
Page 455 of 1807
QUARTER INNER PANEL (CUT-P): Left Side
REMOVAL (With the quarter panel and body lower
back panel removed.)
Cut and Join Location
1. Cut and join the parts at the location as shown
above.
BODY PANEL REPLACEMENTRE-52
Page 456 of 1807
1. Overlap the new parts 20 mm (0.79 in.) at the
locations and spot weld.
INSTALLATION
2. For overlapping areas apply sealer to both
sides.
HINT: For other sealing points, refer to section
AR.
BODY PANEL REPLACEMENTRE-53
Page 457 of 1807
QUARTER INNER PANEL (CUT-P): Right Side
REMOVAL (With the quarter panel and body lower
back panel removed.)
Cut and Join Location
1. Cut and join the parts at the location as shown
above.
BODY PANEL REPLACEMENTRE-50
Page 458 of 1807
INSTALLATION
1. Overlap the new parts 20 mm (0.79 in.) at
the cut locations and spot weld.2. For overlapping areas, apply sealer to both
sides.
HINT: For other sealing points, refer to section
AR.
BODY PANEL REPLACEMENTRE-51
Page 459 of 1807
mm in.
100
2003.94
7.87
QUARTER PANEL (CUT)
REMOVAL
(Cut and Join Location)
200 mm(Cut and Join Location)
Cut and Join Location
100 mm
Cut and Join
Location
Cut and Join Location
(Cut Location for Supply Parts)
Sport Roof
Normal Roof
1. Cut and join the parts at the location shown
above.(Cut and Join Location)
(Cut and Join Location)
BODY PANEL REPLACEMENTRE-34
Page 460 of 1807
REMOVAL (Cont'd)
Normal Roof:
Sport Roof:
BODY PANEL REPLACEMENTRE-35
Trending: air conditioner, oil viscosity, washer fluid, headlamp, hood release, wiring, fuse