display TOYOTA VENZA 2016 Owners Manual

4283-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Casual speech recognization
Due to natural language speech re cognition technology, this system
enables recognition of a command when spoken naturally. However,
the system cannot recognize ev ery variation of each command.
In some situations, it is possible to omit the command for the proce-
dure and directly state the desired operation.
Not all voice commands are displayed in the shortcut menu.
This function is available in English, Spanish and French.
■ Expression examples for each function Command Expression examples
“Call
” Get me .
Phone on his/her
phone.
“Dial ” Get me <3334445555>.
Phone <3334445555>.

4293-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Command list
Some recognizable voice commands and their actions are shown
below as examples.
Basic
Phone Command Action
“Help” Prompts voice guidance to offer examples of
commands or operation methods
“Go Back” Returns to the previous screen
Command Action
“Redial” Places a call to the phone number of the latest
outgoing call
“Call Back” Places a call to the phone number of latest
incoming call
“Show Recent
Calls” Displays the call history screen
“Dial
” Places a call to the said phone number
“Call
” Places a call to the said phone type of the con-
tact from the phone book

4643-5. Other interior features
VENZA_OM_OM73030U_(U)Compass The compass on the inside rear view mirror indicates the direction in
which the vehicle is heading.
■ Operation
To turn the compass on or off,
push and hold “AUTO” for
longer than 3 seconds.
■ Displays and directions Display Direction
N North
NE Northeast
E East
SE Southeast
S South
SW Southwest
W West
NW Northwest

4653-5. Other interior features
3
Interior features
VENZA_OM_OM73030U_(U) Calibrating the compass
The direction display deviates fr om the true direction determined by
the earth’s magnetic field. The amoun t of deviation varies according
to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will
deviate.
To obtain higher precision or perfect calibration, refer to the following. Samoa: 5 Guam: 8 Saipan: 8

4663-5. Other interior features
VENZA_OM_OM73030U_(U) ■ Deviation calibration
Stop the vehicle where it is safe to drive in a circle.
Push and hold “AUTO” until a
number (1 to 15) appears on the
compass display.
Press “AUTO”, and referring to the map above, select the
number of the zone where you are.
Wait a few seconds until the compass direction is displayed. The calibration is complete.
■ Circling calibration
If “C” appears on the display,
drive the vehicle at 5 mph (8 km/
h) or less in a circle until a direc-
tion is displayed. If there is not enough space to
drive in a circle, drive around the
block until the direction is dis-
played.STEP 1
STEP 2
STEP 3
STEP 4

4673-5. Other interior features
3
Interior features
VENZA_OM_OM73030U_(U) ■ Conditions unfavorable to correct operation
The compass may not show the correct direction in the following conditions:
● The vehicle is stopped immediately after turning.
● The vehicle is on an inclined surface.
● The vehicle is in a place where the earth’s magnetic field is subject to
interference by artificial magnetic fields (underground car park/parking
lot, under a steel tower, between buildings, roof car park/parking lot, near
an intersection, near a large vehicle, etc.).
● The vehicle has become magnetized.
(There is a magnet or metal object near the inside rear view mirror.)
● The battery has been disconnected.
CAUTION■ While driving
Do not adjust the display.
Be sure to adjust the display only when the vehicle is stopped.
■ When doing the circling calibration
Be sure to secure a wide space, and watch out for people and vehicles in the
neighborhood. Do not violate any local traffic rules while performing circling
calibration.

4774-2. Maintenance
4
Maintenance and care
VENZA_OM_OM73030U_(U) ■ Resetting the maintenance required reminder light (U.S.A. only)
After the required maintenance is preformed according to the maintenance
schedule, please reset the reminder light.
To reset the reminder light, follow the procedures described below:
Switch the display to the trip meter A when the engine is running.
(  P. 189)
Vehicles with smart key system:
Turn the “ENGINE START STOP” switch off.
Vehicles without smart key system:
Turn the engine switch to the “LOCK” position.
Vehicles with smart key system:
While pressing the trip meter reset button, set the “ENGINE START
STOP” switch to IGNITION ON mode (but do not start the engine
because otherwise the reset mode will be canceled). Continue to
press and hold the trip meter reset button until the trip meter dis-
plays “000000”.
Vehicles without smart key system:
While pressing the trip meter reset button, set the engine switch to
“ON” position (but do not start the engine because otherwise the
reset mode will be canceled). Continue to press and hold the trip
meter reset button until the trip meter displays “000000”.
■ Allow inspection and repairs to be performed by a Toyota dealer
● Toyota technicians are well-trained specialists and are kept up to date
with the latest service information. They are well informed about the
operations of all systems on your vehicle.
● Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly
take care of it. STEP 1
STEP 2
STEP 3

5354-3. Do-it-yourself maintenance
4
Maintenance and care
VENZA_OM_OM73030U_(U) 20 GAUGE NO.1 10 A Entune Premium Audio with
Navigation, back-up lights,
charging system, emergency
flashers, multi-information dis-
play
21 FR WIPER 30 A
Windshield wipers
22 RR WIPER 15 A
Rear window wiper
23 IGN 10 A Multiport fuel injection system/
sequential multiport fuel injection
system, steering lock system,
smart key system, SRS airbag
system, front passenger occu-
pant classification system
24 GAUGE NO.2 7.5 A Gauges and meters, multi-infor-
mation display, multiplex com-
munication system
25 ECU-ACC 7.5 A
Power rear view mirrors
26 SHIFT LOCK 7.5 A
Shift lock system
27 PWR OUTLET
NO.1 15 A
Power outlets
28 RADIO NO.2 7.5 A
Audio system
29 MIR HTR 10 A Outside rear view mirror defog-
gersFuse Ampere Circuit

When trouble arises
5
553
VENZA_OM_OM73030U_(U) 5-1. Essential information
Emergency flashers ......... 554
If your vehicle needs
to be towed .................... 555
If you think something
is wrong ......................... 561
Fuel pump shut off
system ........................... 563 5-2. Steps to take in an
emergency
If a warning light turns
on or a warning
buzzer sounds... ........... 564
If a warning message is
displayed........................ 578
If you have a flat tire......... 579
If the engine will
not start .......................... 590
If the shift lever cannot
be shifted from “P” ......... 593
If you lose your keys ........ 594
If the electronic key does
not operate properly
(vehicles with smart
key system).................... 595
If the battery is
discharged ..................... 598
If your vehicle
overheats ....................... 603
If the vehicle becomes
stuck .............................. 606
If your vehicle has
to be stopped in an
emergency ..................... 608

5
When trouble arises
5675-2. Steps to take in an emergency
VENZA_OM_OM73030U_(U) Follow the correction procedures.
After taking the specified steps to correct the suspected problem,
check that the warning light turns off. Warning light Warning light/Details Correction procedure
Open door warning light
(warning buzzer)
* 1
A door is not fully closed. Check that all doors are
closed.
Driver’s seat belt
reminder light (warning
buzzer)
* 2
Warns the driver to fasten
his/her seat belt. Fasten the seat belt.
(On the center
display) Front passenger’s seat
belt reminder light (warn-
ing buzzer)
* 2
Warns the front passen-
ger to fasten his/her seat
belt. Fasten the seat belt.
Tire pressure warning
light
When the light comes on:
Low tire inflation pressure
such as
• Natural causes (  P. 573)
• Flat tire (  P. 579) Adjust the tire inflation
pressure to the specified
level.
The light will turn off after
a few minutes. In case
the light does not turn off
even if the tire inflation
pressure is adjusted,
have the system checked
by your Toyota dealer.
When the light comes on
after blinking for 1 minute:
Malfunction in the tire
pressure warning system.
(  P. 575) Have the system checked
by your Toyota dealer.