display TOYOTA VENZA 2016 Manual PDF

3653-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Registering and connecti ng from the “Bluetooth
* Setup” screen
To display the screen shown below, press the “SETUP” button and
select “Bluetooth
* ” on the “Setup” screen.
Select to connect the device to
be used with audio system.
(  P. 370)
Select to register a Bluetooth ®
device to be used with audio
system. (  P. 368)
Select to set detailed
Bluetooth ®
system settings.
(  P. 375)
Select to delete registered
devices. (  P. 369)
* : Bluetooth is a registered trade-
mark of Bluetooth SIG, Inc.

3683-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Registering a Bluetooth ®
deviceHow to register a Bluetooth ®
device
Display the “Bluetooth
* Setup” screen. (  P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select “Add”.
When this screen is displayed,
search for the device name dis-
played on this screen on the
screen of your Bluetooth ®
device. For details about operating the
Bluetooth ®
device, see the man-
ual that comes with it.
To cancel the registration, select
“Cancel”.
Register the Bluetooth ®
device using your Bluetooth ®
device.A PIN-code is not required for SSP (Secure Simple Pairing) compat-
ible Bluetooth ®
devices. Depending on the type of Bluetooth ®
device
being connected, a message confirming registration may be dis-
played on the Bluetooth ®
device’s screen. Respond and operate the
Bluetooth ®
device according to the confirmation message.Bluetooth ®
compatible phones (HFP) and portable audio players
(AVP) can be registered simultane ously. You can register up to 5
Bluetooth ®
devices.STEP 1
STEP 2
STEP 3
STEP 4

3693-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Check that this screen is dis-
played when registration is com-
plete.
Select “OK” when the connection status changes from “Con-
necting...” to “Connected”. If an error message is displayed, follow the guidance on the screen
to try again.
Registration can be performed from screens other than the
“Bluetooth
* Setup” screen.
■ When registering from the “Bluetooth
* Audio” screen
Display the “Bluetooth
* Audio” screen. (  P. 336)
Select “Select Device”.
Follow the steps in “How to registering a Bluetooth ®
device”
from . (  P. 368)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Deleting a Bluetooth ®
device
Display the “Bluetooth
* Setup” screen. (  P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select “Remove”.
Select the desired device.
A confirmation message will be displayed, select “Yes” to
delete the device.
Check that a confirmation screen is displayed when the oper-
ation is complete. STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
STEP 2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5

3703-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Connecting a Bluetooth ®
devicePress the “SETUP” button.
Select “Bluetooth
* ”.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select the device to be con-
nected. Supported profile icons will be
displayed.
Phone
Audio player Supported profile icons for cur-
rently connected devices will illu-
minate.
Dimmed icons can be selected to
connect to the function directly.Up to 5 Bluetooth ®
devices (Phones (HFP) and audio players (AVP))
can be registered.
If more than 1 Bluetooth ®
device has been registered, select which
device to connect to. STEP 1
STEP 2
STEP 3

3713-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Auto connection
To turn auto connection mode on, set “Bluetooth
* Power” to on.
(  P. 375)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth ®
phone in a place where a
connection can be established. When the engine switch is turned to the “ACC” or “ON” position (vehicles
without a smart key system) or ACCESSORY or IGNITION ON mode
(vehicles with a smart key system), the system will search for a nearby
cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
Manual connection
When auto connection has failed or “Bluetooth
* Power” is turned off,
you must connect the Bluetooth ®
device manually.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in “Connecting a Bluetooth ®
device” from
. (  P. 370)
Connecting a Bluetooth ®
audio player
Registering an additional device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information:  P. 3 6 8
Selecting a registered device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information:  P. 3 7 0STEP 1
STEP 1
STEP 1
STEP 2
STEP 1
STEP 2

3733-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Displaying a Bluetooth ®
device detailsBluetooth ®
device registration status
Display the “Bluetooth
* Setup” screen. (  P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select the device.
Select “Device Info”.
Following screen is displayed:
Device Name
Change connection method
(  P. 374)
Bluetooth ®
Address
Display your telephone num-
ber
The number may not be dis-
played depending on the
model of phone.
Compatibility profile of the
device
Restore default settingsYou can confirm and change th e registered device details.STEP 1
STEP 2
STEP 3
STEP 4

3753-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Detailed Bluetooth ®
system settingsHow to check and change detailed Bluetooth ®
settings
Display the “Bluetooth
* Setup” screen. (  P. 365)
Select “System Settings”.
The following screen is displayed:
Bluetooth ®
Power on/offYou can change Bluetooth ®
func-
tion
on/off
Bluetooth ®
Name
Change PIN-code (  P. 376)
Bluetooth ®
Address
Display Phone Status You can set the system to show
the status confirmation display
when connecting a telephone
Display Audio Player Status You can set the system to show
the status confirmation display
when connecting an audio player
Compatibility profile of the sys-
tem
Restore default settings
* : Bluetooth is a registered trade-
mark of Bluetooth SIG, Inc.You can confirm and change the detailed Bluetooth ®
settings.STEP 1
STEP 2
STEP 3

3773-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Listening to Bluetooth ®
Audio
Status display
You can check such indicators as signal strength and battery charge
on the screen.
Battery charge The battery charge indicator may
not be displayed depending on
the connected device.
Connection statusThe Bluetooth ®
audio system enables the user to enjoy music
played on a portable player from the vehicle speakers via wireless
communication.
When a Bluetooth ®
device cannot be con nected, check the con-
nection status on the “Bluetooth* Audio” screen. If the device is not
connected, either register or reconnect the device. (  P. 370)*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Indicators Conditions
Battery charge Full Empty
Connection status Good Not connected

3793-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Using a Bluetooth ®
Phone
Phone screen
To display the screen shown below, press the switch on the
steering wheel or the button.
Several functions are available to operate on each screen that is dis-
played by selecting the 4 tabs.
Device name
Bluetooth ®
connection statusThe hands-free system is a function th at allows you to use your cel-
lular phone without touching it.
This system supports Bluetooth ®
. Bluetooth ®
is a wireless data sys-
tem that allows the cellular phone to wirelessly connect to the
hands-free system and make/receive calls.
Before making a phone call, check the connection status, battery
charge, call area and signal strength. (  P. 381)
If a Bluetooth ®
device cannot be connec ted, check the connection
status on the phone screen. If the de vice is not connected, either
register or reconnect it. (  P. 370)

3813-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Status display
You can check indicators such as signal strength and battery charge
on the phone screen.
Connection status
Signal strength
Battery charge
Indicators Conditions
Connection status Good Poor Not connected
(Blue) (Gray)
Battery charge Full Empty
Signal strength Excellent Poor