display TOYOTA VENZA 2016 Manual Online

3823-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Making a call Dialing
Display the phone screen. (  P. 379)
Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select .
For the first digit, you can enter “+” by selecting “  ” for a while.
Press the switch on the steering wheel or select .
Dialing from the contacts list
You can dial a number from the c ontact data imported from your cel-
lular phone. The system has one contact for each registered phone.
Up to 2500 contacts may be stored in each contact.
Display the phone screen. (  P. 379)
Select “Contacts” tab.
Choose the desired contact to call from the list.
Choose the number and then press the switch on the
steering wheel or select .
When the contact is empty
You can transfer the phone numbers in a Bluetooth ®
phone to the
system.
Operation methods differ between PBAP (Phone Book Access Pro-
file) compatible and PBA P incompatible Bluetooth ®
phones. If the
cellular phone does not support either PBAP or OPP (Object Push
Profile) service, you ca nnot transfer contacts.Once a Bluetooth ®
phone is registered, you can make a call using
the following procedure: STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4

3843-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Calling using favorites list
You can make a call using numbers registered in the contact.
Display the phone screen. (  P. 379)
Select “Favorites” tab.
Select the desired number to make a call.
Dialing from call history
You can make a call using the call history, which has the 3 functions
below.
: calls which you missed
: calls which you received
: calls which you made
Display the phone screen. (  P. 379)
Select “Call History” tab.
Select or the desired entry from the list.
When is selected
Check that the “Call” screen is displayed.
When the desired contact is selected
Select the desired number.
Check that the “Call” screen is displayed. STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 4
STEP 5

3853-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features ■ Call history list
● If you make a call to or receive a call from a number registered in the
contact, the name is displayed in the call history.
● If you make multiple calls to the same number, only the last call made is
displayed in the call history.
■ International calls
You may not be able to make international calls, depending on the mobile
phone in use.

3863-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Receiving a call To answer the phone
Press the switch on the
steering wheel or select .
To refuse a call
Press the switch on the steering wheel or select .
To adjust the incoming call volume
Turn the “PWR VOL” knob. You can also adjust the volume using the
steering switches. When a call is received, the follo wing screen is displayed together
with a sound.
■ International calls
Received international calls may not be displayed correctly depending on
the cellular phone in use.

3873-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Speaking on the phone
To adjust the call volume
Select “-” or “+”. You can also adjust the volume using the steering
switches or the volume knob.
To prevent the other party from hearing your voice
Select “Mute”.
Inputting tones
When using phone services such as an answering service or a bank,
you can store phone numbers and code numbers in the contact.
Select “0-9”.
Input the number.
■ Release Tones
“Release Tones” appear when a cont inuous tone signal(s) contain-
ing a (w) is registered in the contact list.
Select “Release Tones”.The following screen is displayed when speaking on the phone.
STEP 1
STEP 2
STEP 1

3893-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features To transfer a call
Select “Handset Mode” to on from a hands-free call to a cellular
phone call.
Select “Handset Mode” to off from a cellular phone call to a hands-
free call.
Transmit volume setting
Select “Transmit Volume”.
Select the desired level for the transmit volume.
Select “OK”.
To hang up
Press the switch on the steering wheel or select .
Call waiting
When a call is interrupted by a third party while talking, an incoming
call message will be displayed.
To talk with the other party:
• Press the switch on the
steering wheel.
•Select .
To refuse the call:
• Press the switch on the
steering wheel.
•Select .
Every time you press the switch on the steering wheel or select
during call waiting, you will be switched to the other party. STEP 1
STEP 2
STEP 3

3903-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Transferring calls
● If you transfer from the cellular phone to hands-free, the hands-free
screen will be displayed, and you can operate the system using the
screen.
● Transfer method and operation may vary according to the cellular phone
used.
● For operation of the cellular phone in use, see the phone’s manual.
■ Call waiting operation
Call waiting operation may differ depending on your phone company and
cellular phone.

3913-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Bluetooth ®
phone message function
Displaying “Messa ge Inbox” screen
Press the button.
Select .
Receiving a message
When an e-mail/SMS/MMS is received, the incoming message
screen pops up with sound and is ready to be operated on the
screen.
Select to check the message.
Select to refuse the message.
Select to call the message
sender.Received messages can be forwarded from the connected
Bluetooth ®
phone, enabling checking and replying using the audio
system.
Depending on the type of Bluetooth ®
phone connected, received
messages may not be transfer red to the message inbox.
If the phone does not support the message function, this function
cannot be used. STEP 1
STEP 2

3923-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Receiving a message
● Depending on the cellular phone used for receiving messages, or its reg-
istration status with the navigation system, some information may not be
displayed.
● The pop up screen is separately available for incoming e-mail and SMS/
MMS messages under the following conditions:
E-mail:
• “Incoming E-mail Display” is set to “Full Screen”. (  P. 408)
• “E-mail Notification Popup” is set to on. (  P. 408)
SMS/MMS:
• “Incoming SMS/MMS Display” is set to “Full screen”. (  P. 408)
• “SMS/MMS Notification Popup” is set to on. (  P. 408)

3933-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Checking the messages
Display the “Messa ge Inbox” screen. (  P. 391)
Select the desired message from the list.
Check that the message is displayed.
E-mails: Select “Mark Unread”
or “Mark Read” to mark mail
unread or read on the mes-
sage inbox screen. This function is available when
“Update Read Status on Phone”
is set to on (  P. 408)
Select to make a call to the
sender.
Select to have messages read
out. To cancel this function,
select “Stop”.
Select to display the previous
or next message.
Select to reply the message.STEP 1
STEP 2
STEP 3