TOYOTA VENZA 2016 Owners Manual
VENZA 2016
TOYOTA
TOYOTA
https://www.carmanualsonline.info/img/14/59273/w960_59273-0.png
TOYOTA VENZA 2016 Owners Manual
Trending: ECO mode, service schedule, service interval, oil change, snow chains, belt, brake fluid
Page 371 of 688

3713-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Auto connection
To turn auto connection mode on, set “Bluetooth
* Power” to on.
( P. 375)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth ®
phone in a place where a
connection can be established. When the engine switch is turned to the “ACC” or “ON” position (vehicles
without a smart key system) or ACCESSORY or IGNITION ON mode
(vehicles with a smart key system), the system will search for a nearby
cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
Manual connection
When auto connection has failed or “Bluetooth
* Power” is turned off,
you must connect the Bluetooth ®
device manually.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in “Connecting a Bluetooth ®
device” from
. ( P. 370)
Connecting a Bluetooth ®
audio player
Registering an additional device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information: P. 3 6 8
Selecting a registered device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information: P. 3 7 0STEP 1
STEP 1
STEP 1
STEP 2
STEP 1
STEP 2
Page 372 of 688
3723-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Reconnecting a Bluetooth ®
phone
If the system cannot connect due to poor signal strength with the engine
switch in the “ACC” or “ON” position (vehicles without a smart key system) or
ACCESSORY or IGNITION ON mode (vehicles with a smart key system),
the system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, the connection must be made manually, or the phone must be rese-
lected.
Page 373 of 688
3733-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Displaying a Bluetooth ®
device detailsBluetooth ®
device registration status
Display the “Bluetooth
* Setup” screen. ( P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select the device.
Select “Device Info”.
Following screen is displayed:
Device Name
Change connection method
( P. 374)
Bluetooth ®
Address
Display your telephone num-
ber
The number may not be dis-
played depending on the
model of phone.
Compatibility profile of the
device
Restore default settingsYou can confirm and change th e registered device details.STEP 1
STEP 2
STEP 3
STEP 4
Page 374 of 688
3743-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Changing connection method
Select “Connect Audio Player from”.
Select “Vehicle” or “Device”. “Vehicle”: Connect the audio system to the portable audio player.
“Device”: Connect the portable audio player to the audio system STEP 1
STEP 2
Page 375 of 688
3753-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Detailed Bluetooth ®
system settingsHow to check and change detailed Bluetooth ®
settings
Display the “Bluetooth
* Setup” screen. ( P. 365)
Select “System Settings”.
The following screen is displayed:
Bluetooth ®
Power on/offYou can change Bluetooth ®
func-
tion
on/off
Bluetooth ®
Name
Change PIN-code ( P. 376)
Bluetooth ®
Address
Display Phone Status You can set the system to show
the status confirmation display
when connecting a telephone
Display Audio Player Status You can set the system to show
the status confirmation display
when connecting an audio player
Compatibility profile of the sys-
tem
Restore default settings
* : Bluetooth is a registered trade-
mark of Bluetooth SIG, Inc.You can confirm and change the detailed Bluetooth ®
settings.STEP 1
STEP 2
STEP 3
Page 376 of 688
3763-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Editing the Bluetooth
* PIN
You can change the PIN-c ode that is used to register your Bluetooth ®
devices in the system.
Select “Bluetooth
* PIN”.
Input a PIN-code, and select “OK”.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc. STEP 1
STEP 2
Page 377 of 688
3773-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Listening to Bluetooth ®
Audio
Status display
You can check such indicators as signal strength and battery charge
on the screen.
Battery charge The battery charge indicator may
not be displayed depending on
the connected device.
Connection statusThe Bluetooth ®
audio system enables the user to enjoy music
played on a portable player from the vehicle speakers via wireless
communication.
When a Bluetooth ®
device cannot be con nected, check the con-
nection status on the “Bluetooth* Audio” screen. If the device is not
connected, either register or reconnect the device. ( P. 370)*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Indicators Conditions
Battery charge Full Empty
Connection status Good Not connected
Page 378 of 688
3783-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Playing Bluetooth ®
audio
Select or to Play/Pause.
For details on “Bluetooth
* Audio” screen operation methods, refer to
Basic Audio Operations. ( P. 326)
For details on how to select a track or album, refer to selecting, fast-
forwarding and reversi ng tracks/files/songs. ( P. 338)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Page 379 of 688
3793-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Using a Bluetooth ®
Phone
Phone screen
To display the screen shown below, press the switch on the
steering wheel or the button.
Several functions are available to operate on each screen that is dis-
played by selecting the 4 tabs.
Device name
Bluetooth ®
connection statusThe hands-free system is a function th at allows you to use your cel-
lular phone without touching it.
This system supports Bluetooth ®
. Bluetooth ®
is a wireless data sys-
tem that allows the cellular phone to wirelessly connect to the
hands-free system and make/receive calls.
Before making a phone call, check the connection status, battery
charge, call area and signal strength. ( P. 381)
If a Bluetooth ®
device cannot be connec ted, check the connection
status on the phone screen. If the de vice is not connected, either
register or reconnect it. ( P. 370)
Page 380 of 688
3803-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Telephone switch ( P. 396)
■ Microphone
The vehicle’s built in microphone
is used when talking on the
phone.
The person you are speaking to
can be heard from the front
speakers.
To use the hands-free system,
you must register your
Bluetooth ®
phone in the system.
( P. 368)
Trending: fuel type, ECU, service interval, keyless, oil dipstick, manual transmission, wheel bolts