VOLVO XC90 TWIN ENGINE HYBRID 2017 Owners Manual
Manufacturer: VOLVO, Model Year: 2017, Model line: XC90 TWIN ENGINE HYBRID, Model: VOLVO XC90 TWIN ENGINE HYBRID 2017Pages: 584, PDF Size: 14.2 MB
Page 271 of 584
DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction.269
Changing a Speed Limiter (SL)*maximum speed
Function buttons and symbols
–Change a set maximum speed by pressing
the (1) or — (3) buttons briefly or bypressing and holding them:
•Press briefly: changes the maximumspeed in +/– 5 mph (+/– 5 km/h) incre-ments. Each press changes the maximumspeed by +/– 5 mph (+/– 5 km/h).
•Press and hold: changes the maximumspeed +/– 1 mph (+/– 1 km/h) at a time.Release the button when the indicator (4)has moved to the desired maximumspeed.
Limitations
When driving down steep hills, the SpeedLimiter's braking effect may not be adequate andthe set maximum speed may be exceeded. Themessage Speed limit exceeded will appear inthe instrument panel to alert the driver.
NOTE
This message will appear if the maximumspeed is exceeded by more than approx.2 mph (3 km/h).
Related information
•Speed limiter (SL)* (p. 267)
Automatic Speed Limiter (ASL)*
The Automatic Speed Limiter (ASL) helps thedriver adapt the vehicle's maximum speed to theposted speed limits.
The Speed Limiter (SL) function can be switchedto Automatic Speed Limiter.
Where applicable, ASL uses speed informationfrom the Road Sign Information* system to auto-matically adapt the vehicle's maximum speed.
WARNING
•ASL is a supplemental aid to the driverand does not function in all driving situa-tions or in all traffic, weather or road con-ditions. It can never replace the driver
Page 272 of 584
||
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.270
Is SL or ASL active?
Symbols in the instrument panel indicate whichfunction is active:
SymbolSLASL
A✓✓
Sign symbolB after "70": ASL is acti-vated.
✓
AWHITE symbol: the function is active, GRAY symbol: the func-tion is in standby mode.BSee the section "ASL symbol" below for an explanation of thesymbol's different colors.
ASL symbol
A road sign symbol (next to the storedspeed in the center of the speedome-ter) can be displayed in three differentcolors as explained in the followingtable:
Road signsymbol's colorExplanation
Green/yellowASL is active
GrayASL is in standby mode
Amber/orangeASL is temporarily in standbymode (e.g., because a speedlimit sign could not be read)
Limitations
•ASL utilizes the speed limit information provi-ded by the Road Sign Information* system(RSI), not from the speed limit signs that thevehicle passes.
•If RSI cannot provide ASL with speed-relatedinformation, ASL will go into standby modeand switch to SL. The driver will have to reactand adapt the vehicle's speed.
•ASL will reactivate when RSI is once againable to read a speed limit sign.
See also the article "Road Sign Information limi-tations".
Related information
•Speed limiter (SL)* (p. 267)
•Activating/deactivating the Automatic SpeedLimiter (ASL)* (p. 271)
•Changing tolerance for the Automatic SpeedLimiter (p. 271)
•Starting and activating the Speed Limiter(SL)* (p. 268)
•Deactivating/reactivating the Speed Limiter*(p. 272)
•Road Sign Information (RSI)* (p. 346)
•Road Sign Information (RSI)* limitations(p. 348)
Page 273 of 584
DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction.271
Activating/deactivating the
Automatic Speed Limiter (ASL)*
The function Automatic Speed Limiter (ASL) is asupplement to the Speed Limiter (SL) and canbe activated/deactivated.
ASL is activated/deactivated inthe center display's Functionview.
Activating ASL
With SL activated:
1.Tap the Speed Sign Assist button2 in thecenter display's Function view.
>ASL will go into standby mode and agreen indicator light in the button will illu-minate. A road sign symbol will be dis-played in center of the speedometer.
2.Press the button on the left-side steer-ing wheel keypad.
>ASL will be activated with the vehicle'scurrent speed.
Deactivating ASL
–Tap the Speed Sign Assist button in thecenter display's Function view.
>ASL will be deactivated, the indicator willbe GRAY and the Speed limiter (SL) willbe activated.
WARNING
After switching from ASL to SL, the vehiclewill no longer adapt speed to posted speedlimits. It will only limit the vehicle's maximumspeed.
Related information
•Speed limiter (SL)* (p. 267)
•Automatic Speed Limiter (ASL)* (p. 269)
Changing tolerance for theAutomatic Speed Limiter
Automatic Speed Limiter can be set to differenttolerance levels.
Posted speed limit tolerance
ASL can be set to allow the vehicle to driveabove or below the posted speed limit. For exam-ple, if the current posted speed limit is 45 mph(75 km/h), the driver can opt to allow the vehicleto drive at a speed of 50 mph (80 km/h).
2If this button is tapped while SL is activated, ASL will immediately begin reading road signs.
Page 274 of 584
||
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.272
Function buttons and symbols (generic illustration)
–Press the button (1) until 45 mph(75 km/h) has changed to 50 mph
(80 km/h) in the center of the speedometer(4).
>The vehicle will then use the selected tol-erance +5 mph (+5 km/h) until the vehi-cle passes a sign with a lower or higherspeed limit. The vehicle will then adjust tothe new maximum speed and the set tol-erance will be deleted from the system'smemory.
If the Road Sign Information* system isactivated, the posted speed limit will beindicated by a RED marker on the spee-dometer's speed scale.
The set tolerance can be adjusted in thesame way as the set Speed Limiter's setmaximum speed.
NOTE
The greatest tolerance that can be set is +/–5 mph (10 km/h).
Related information
•Automatic Speed Limiter (ASL)* (p. 269)
•Activating/deactivating the Automatic SpeedLimiter (ASL)* (p. 271)
•Road Sign Information (RSI)* (p. 346)
•Changing a Speed Limiter (SL)* maximumspeed (p. 269)
Deactivating/reactivating the Speed
Limiter*
The Speed Limiter (SL) can be temporarily deac-tivated and put in standby mode.
Deactivating and putting SL in standby
mode
To temporarily put the Speed Limiter in standbymode:
Function buttons and symbols
–Press the button (2).
>The symbols in the instrument panel willchange colors from WHITE to GRAY.
This indicates that SL is temporarily instandby mode and will not limit the vehi-cle's maximum speed.
Page 275 of 584
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.273
Reactivating SL from standby mode
To reactivate SL after it has temporarily been putin standby mode:
–Press the button (1).
>The maximum speed marker (4) and sym-bols will change colors to WHITE and thevehicle's maximum speed will be limited tothe previously set maximum speed.
or
–Press the button (2).
>The symbols will change colors fromGRAY to WHITE and the vehicle's currentspeed will be set as the maximum speed.
Increasing the speed with the
accelerator pedal
The set maximum speed can be temporarilyexceeded using the accelerator pedal withoutputting SL in standby mode, for instance whenquick acceleration is required.
1. Press the accelerator pedal as far down aspossible and release it when the vehicle hasreached the desired speed.
> SL remains activated (the symbols in theinstrument panel will remain WHITE).
2. Release the accelerator pedal when the tem-porary acceleration is completed.
> The vehicle will slow down and its speedwill remain under the set maximum speed.
Related information
•Speed limiter (SL)* (p. 267)
•Starting and activating the Speed Limiter(SL)* (p. 268)
Turning the Speed Limiter* off
The Speed Limiter (SL) can be turned off.
Function buttons and symbols
1.Press the button (2).
>SL will go into standby mode.
2.Press the ◀ (1) or ▶ (3) buttons to selectanother function.
> The SL symbol (4) in the instrument panelwill go out and the set maximum speedwill be erased from the system's memory.
3.Press the button (2) again.
>The newly selected function will be acti-vated.
Related information
•Speed limiter (SL)* (p. 267)
•Starting and activating the Speed Limiter(SL)* (p. 268)
Page 276 of 584
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.274
Cruise Control (CC)
Cruise Control (CC) is designed to assist thedriver by maintaining a set speed. It is primarilyintended for use on long straight roads in steadytraffic, such as on highways and other mainroads in smoothly flowing traffic.
Overview
Function buttons and symbols (generic illustration)
Increases the set speed or CC switchesfrom standby mode to active mode
The set speed will be resumed
Press to put CC in active mode and setthe current speed or from active mode, pressto put CC in standby mode
— Decreases the set speed
Set speed indicator
The vehicle's current speed
The set speed
In models equipped with the optional AdaptiveCruise Control (ACC), the driver can togglebetween CC and ACC – see the article "Switch-ing between Cruise Control and Adaptive CruiseControl".
WARNING
•The vehicle must always be drivenaccording to current traffic/road condi-tions. The driver must take action if CCdoes not maintain a suitable speedand/or distance to other vehicles.
•The driver is always responsible for oper-ating the vehicle in a safe manner.
Related information
•Starting and activating Cruise Control(p. 274)
•Changing Cruise Control speed (p. 275)
•Deactivating/resuming Cruise Control (CC)(p. 276)
•Turning Cruise Control off (p. 277)
•Adaptive Cruise Control (ACC)* (p. 281)
•Switching between Cruise Control andAdaptive Cruise Control* (p. 278)
Starting and activating CruiseControl
Cruise Control (CC) must be selected and acti-vated before it can regulate the vehicle's speed.
Selecting CC (putting it in standby
mode)
Function buttons and symbols
–Press ◀ (1) or ▶ (3) to scroll to the CC
() function.
>The symbol (4) will be displayed in theinstrument panel. This indicates that CChas been selected and can then be acti-vated to maintain a set speed.
Page 277 of 584
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.275
NOTE
Before CC can be activated, the vehicle'sspeed must be at least 20 mph (30 km/h).This is also the lowest speed that can be set.
Activating CC (putting it in active mode
and setting a speed)
–With the symbol displayed (CC is in
standby mode), press the button (2) onthe left-side steering wheel keypad.
>This puts CC in active mode and willmaintain the vehicle's current speed.
Related information
•Cruise Control (CC) (p. 274)
•Switching between Cruise Control andAdaptive Cruise Control* (p. 278)
•Deactivating/resuming Cruise Control (CC)(p. 276)
•Turning Cruise Control off (p. 277)
Changing Cruise Control speed
Changing a set speed
Function buttons and symbols (generic illustration)
–Change a set speed by pressing the (1)or — (3) buttons briefly or by pressing andholding them:
•Press briefly: changes speed in+/– 5 mph (+/– 5 km/h) increments.Each press changes the vehicle's speedby +/– 5 mph (+/– 5 km/h).
•Press and hold: changes the speed+/– 1 mph (+/– 1 km/h) at a time.Release the button when the set speedindicator (4)/(6) has moved to the desiredspeed.
If speed is increased by pressing the accelerator
pedal before the button is pressed, the vehi-cle's speed when the button is pressed will
become the set speed assuming that the accel-erator pedal is still depressed when the button ispressed.
A temporary increase in speed, such as whenpassing another vehicle, does not affect the CCset speed. The vehicle will return to the set speedwhen the accelerator pedal is released. Alwaysobserve posted speed limits.
Engine braking instead of applying the
brakes
CC regulates speed by applying the brakeslightly. To avoid a loss of speed when drivingdown hills, use the engine braking functioninstead of letting the CC apply the brakes. In thissituation, the driver can temporarily deactivate theCC braking function.
To do so:
–Press the accelerator pedal approx. halfwaydown and release it.
>CC will automatically deactivate the auto-matic brake function and will then onlyuse the engine braking function.
Related information
•Cruise Control (CC) (p. 274)
Page 278 of 584
DRIVER SUPPORT
276
Deactivating/resuming CruiseControl (CC)
Cruise Control (CC) can be temporarily deacti-vated and put in standby mode.
Deactivating and putting CC in standby
mode
To temporarily deactivate and put Cruise Controlin standby mode:
Function buttons and symbols (generic illustration)
–Press the button (2).
>The set speed marker (4) and symbols willchange colors from WHITE to GRAY.
This indicates that CC is temporarily instandby mode and will not maintain a setspeed.
Standby mode due to action by the driver
CC is temporarily deactivated and put in standbymode if:
•the brakes are applied
•The gear selector is moved to N
•the vehicle is driven faster than the setspeed for more than 1 minute.
In these cases, the driver will have to regulate thevehicle's speed.
A temporary increase in speed, such as whenpassing another vehicle, does not affect the CCset speed. The vehicle will return to the set speedwhen the accelerator pedal is released.
Automatic standby mode
CC switches automatically to standby mode if:
•the wheels lose traction
•engine speed (rpm) is too high/low
•brake temperature is too high
•the vehicle's speed goes below approx.20 mph (30 km/h)
In these cases, the driver will have to regulate thevehicle's speed.
Reactivating CC from standby mode
To reactivate CC after it has temporarily been putin standby mode:
–Press the button (1).
>The set speed marker (4) will changecolor from GRAY to WHITE. The vehiclewill then return to the most recently setspeed.
WARNING
There may be a significant increase in speed
after the button has been pressed.
or
Page 279 of 584
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.277
–Press the button (2).
>The set speed marker (4) and symbols willchange colors from GRAY to WHITE. CCwill then set and maintain the vehicle'scurrent speed.
Related information
•Cruise Control (CC) (p. 274)
•Starting and activating Cruise Control(p. 274)
Turning Cruise Control off
Cruise Control (CC) can be deactivated (turnedoff).
Function buttons and symbols
1.Press the button (2) on the left-sidesteering wheel keypad.
>This puts CC in standby mode.
2.Press the ◀ or ▶ button to switch to anotherfunction.
> The Cruise Control symbol in the instru-
ment panel will go out.
3.Press the button (2) again.
>Another function will be activated and theset speed in the CC system's memory willbe erased.
In models equipped with the optional AdaptiveCruise Control (ACC), the driver can toggle
between CC and ACC – see the article "Switch-ing between Cruise Control and Adaptive CruiseControl".
Related information
•Cruise Control (CC) (p. 274)
•Starting and activating Cruise Control(p. 274)
•Switching between Cruise Control andAdaptive Cruise Control* (p. 278)
Page 280 of 584
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.278
Switching between Cruise Control
and Adaptive Cruise Control*
In models equipped with the optional ACC, thedriver can toggle between CC and ACC.
A symbol in the instrument panel will indicatewhich system is currently being used:
CC
Cruise Control
ACC
Adaptive Cruise Control
AA
AIf the symbol is WHITE, the function is active. If the symbol isGRAY, the function is in standby mode.
Switching from ACC to CC
To switch from ACC to CC:
1.Put ACC in standby mode with the but-ton on the left-side steering wheel keypad.
2.From the center display's Function view, tapthe Cruise control button.
>The symbol in the instrument panel will
change from (ACC) to (CC) and CC is in standby mode (readyfor use but not currently maintaining a setspeed).
3.Press the button on the left-side steer-ing wheel keypad.
>CC goes into active mode and sets thevehicle's current speed.
WARNING
Switching from ACC to CC means that:
•Your vehicle will no longer automaticallymaintain a set distance to a vehicleahead.
•Only the set speed will be maintained andthe driver will have to apply the brakeswhen needed.
If CC was activated when the engine was turnedoff, ACC will be selected and go into standbymode when the engine is restarted.
Switching from CC to ACC
To switch from CC to ACC:
1.Put CC in standby mode with the buttonon the left-side steering wheel keypad.
2.In the center display's Function view, tap theAdaptive Cruise Control button.
>The symbol in the instrument panel will
change from (CC) to (ACC) and ACC is in standby mode (readyfor use but not currently maintaining a setspeed/time interval).
3.Press the button on the left-side steer-ing wheel keypad.
>ACC goes into active mode and sets thevehicle's current speed and the selectedtime interval to the vehicle ahead.
Related information
•Cruise Control (CC) (p. 274)
•Adaptive Cruise Control (ACC)* (p. 281)
•Center display overview (p. 33)