start stop button Abarth Punto 2012 Owner handbook (in English)

100
KNOWING
YOUR VEHICLE
SAFETY
ST

ARTING
AND DRIVING
WARNING LIGHTS AND MESSAGES
IN AN
EMERGENCY
MAINTENANCE AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
NO ENGINE CUT-OUT
CONDITIONS
With the device activated, for reasons of comfort,
limiting emissions and safety, the engine does not stop in
certain conditions, including:
❒engine still cold;
❒ particularly cold outside temperatures, where the
appropriate indication is provided;
❒ battery not sufficiently charged;
❒ heated rear window activated;
❒ windscreen wipers working at maximum speed;
❒ driver’s door not shut;
❒ driver’s seat belt not fastened;
❒ reverse gear engaged (for example, during parking
manoeuvres);
❒ automatic climate control is on and a comfortable
temperature has not yet been reached or MAX –
DEF function enabled;
❒ during the first period of use, to initialise the system.
In the above cases, a message appears in the display and
the warning light fig. 98 flashes in the instrument panel.
MANUAL ACTIVATION AND
DEACTIVATION
You can activate/deactivate the Start&Stop device by
pressing the button on the dashboard fig. 96.
When the device is active, the relevant warning light on
the instrument panel switches on fig. 97.
When the system is deactivated, the warning light on
the instrument panel switches on fig. 98.
The relevant device deactivation/activation messages
appear on the reconfigurable multifunction display.
F0U096Abfig. 98
069-108 GPUNTO EVO Abarth GB 2ed 8-11-2010 14:44 Pagina 100

102
KNOWING
YOUR VEHICLE
SAFETY
ST

ARTING
AND DRIVING
WARNING LIGHTS AND MESSAGES
IN AN
EMERGENCY
MAINTENANCE AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
F0U185Abfig. 100F0U186Abfig. 101
EMERGENCY STARTING fig. 101
When jump starting, never connect the negative lead (-)
of the auxiliary battery to the negative pole A of the car
battery, but rather to an engine/gearbox earth point.
Note In any case, it is possible to keep the engine
running by deactivating the Start&Stop system.
IRREGULAR OPERATION
In the case of malfunction the Start&Stop system is
disabled. The driver is informed of the problem by the
general failure warning light
A-fig. 99, where provided, coming on with an
information message and the system failure symbol
B-fig. 5 in the control panel. In this case, contact an
Abarth Dealership.
CAR INACTIVITY fig. 100
In the case of car inactivity, special attention must be paid
due to the disconnection of the battery power supply.
Proceed as follows: detach the connector A (by pressing
button B) from sensor C for monitoring the status of the
battery installed on the negative battery pole D. This
sensor should never be disconnected from the pole except
if the battery is replaced.
When replacing the battery, always
contact an Abarth Dealership. Replace
the battery using a new one of the same type
(HEAVY DUTY) and having the same
specifications.
WARNING
069-108 GPUNTO EVO Abarth GB 2ed 8-11-2010 14:44 Pagina 102

134
KNOWING
YOUR VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS AND MESSAGES
IN AN
EMERGENCY
MAINTENANCE AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
F0U125Abfig. 125
USING THE MANUAL GEARBOX
To engage the gears, press the clutch pedal fully and put
the gear lever into one of the required positions (the
diagram is shown on the knob fig. 125).
To engage 6
thgear, operate the lever by pressing it
towards the right in order to avoid engaging 4thgear by
mistake. The same applies to the shift from 6thto 5th
gear.
IMPORTANT The car can only be put into reverse gear
when it has stopped moving completely.
To engage reverse R from neutral, proceed as follows:
raise sliding ring A-fig. 125 under the knob and at the
same time move the gear lever to the left and then
forwards.
HANDBRAKE fig. 124
The handbrake lever is located to the left of the driver’s
seat. Pull the handbrake lever upwards until the car
cannot be moved. Four or five clicks are generally
enough when the car is on level ground while nine or
ten may be required if the car is on a steep slope and
laden.
IMPORTANT If this is not the case, contact an Abarth
Dealership to have the handbrake adjusted.
When the handbrake is engaged and the ignition key is
in
MARposition, the warning light xon the instrument
panel will turn on.
Proceed as follows to release the handbrake:
❒slightly lift the handbrake and press the release
button
A;
❒keep button Apressed and lower the lever. The
warning light
xon the instrument panel will turn off.
Press the brake pedal when carrying out this operation
to prevent the car from moving accidentally.
131-140 GPUNTO EVO Abarth GB 2ed 8-11-2010 14:43 Pagina 134

RADIO
245
PRESET BUTTONS
The buttons numbered from 1 to 6 are used to set the
following preselections:
❒18 in the FM band (6 in FM1, 6 in FM2, 6 in FMT or
“FMA” on some versions);
❒ 12 in the MW band (6 in MW1, 6 in MW2).
To listen to a preset station, select the desired frequency
band and then press the corresponding preset button
briefly (from 1 to 6).
By pressing the preset button for more than 2 seconds,
the tuned station will be stored. The storing phase is
confirmed by a beep.
STORING THE LAST STATION LISTENED TO
The radio automatically stores the last station that was
selected for each reception band, that is then tuned into
when the radio is turned on or when the reception band
is changed. AUTOMATIC TUNING
Briefly press the ¯
or ˙button to start the automatic
tuning search for the next station that can be received in
the selected direction.
If the button ¯ or ˙is pressed for longer, the rapid
search is started. When the button is released, the tuner
will stop on the next station that can be received.
If the TA function (traffic news) is on, the tuner searches
only for stations that broadcast traffic news.
MANUAL TUNING
This is used to manually search for stations in the
preselected band.
Select the desired frequency band and then press the
button ▲or ▼briefly and repeatedly to start the search
in the desired direction.
If the button ▲ or ▼is pressed longer, the rapid search
starts and then stops when the button is released.
221-258 GPUNTO EVO Abarth GB 2ed 8-11-2010 14:47 Pagina 245

RADIO
250
DISPLAY INFORMATION
When the CD player is in operation, information
appears on the display with the following meanings:
❒“CD Track 5”: indicates the CD track number;
❒ “03:42”: indicates the time elapsed since the start of
the track (if the relevant Menu function is activated).
TRACK SELECTION (forward/backward)
Briefly press the ¯ button to play the previous CD track
and the ˙ button to play the next track. The tracks are
selected cyclically: the first track is selected after the last
track and vice versa.
If the track has been played for more than 3 seconds,
pressing the ¯button will cause the track to be started
again from the beginning. In this case, if you want to play
the previous track, press the button twice in succession. FAST FORWARD/REWIND THROUGH
TRACKS
Keep the button
˙pressed down to fast forward the
selected track and keep the button ¯pressed down to
fast rewind the track. The fast forward/rewind will stop
once the button is released.
PAUSE FUNCTION
To pause the CD player, press the button MUTE. The
text “CD Pause” appears on the display.
To resume listening to the track, press the button MUTE
again.
If another audio source is selected, the pause function is
deactivated.
221-258 GPUNTO EVO Abarth GB 2ed 8-11-2010 14:47 Pagina 250

264
KNOWING
YOUR VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS AND MESSAGES
IN AN
EMERGENCY
MAINTENANCE AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
Radio transmitters and mobilephones (important notes) ........ 106
Raising th e car ............................... 178
Rear fog lig hts ................................ 59
– bulb replace ment .................... 166
Rear light clusters – bulb replace ment .................... 165
Rear seats ....................................... 32
– cleaning ..................................... 203
– headrests .................................. 33
Rear window washer – activating ................................... 53
– checking levels
and topping up ............................ 190
– nozzles ...................................... 199
Rear window wiper – blade replacement .................. 198
– nozzles ...................................... 199
– operation .................................. 53
Reconfigurable multifunction displa y ........................................... 16
– control buttons ....................... 17
– display funct ions ...................... 20
– setup menu .............................. 18
– standard s creen ....................... 16
Refuelling – fuel ............................................. 107 – technical specifications
(fluid quantity an
d type) ............ 216
Regular checks .............................. 186
Remote cont rol ............................ 6
– additional remote controls .... 8
– battery replacement ............... 7
– remote door opening/
closing ............................................ 6
– tailgate op ening ....................... 6
Rev coun ter ................................... 14
Reverse lights – bulb replace ment .................... 166
Reverse lights – bulb replace ment .................... 166
Right hand drive version ............. 257
Roof bar atta chments................... 83
Roof rack/ski ra ck (setup) .......... 83
Roof rack/ski rack bars (capabilit y) ..................................... 83
Rubber tubes (maintenance) ...... 197
Safety .............................................. 109
Saving fue l ....................................... 135
SBR system...................................... 111
Scheduled se rvicing plan ...... 184-185
Scrappage ....................................... 255Seat belt preten
sioners ............... 111
– load limiters ............................. 112
Seat belt s ......................................... 109
– carrying children safely
(child seats) ................................. 115
– general warnings ..................... 112
– load limiters ............................. 112
– maintenance ............................. 114
– pretensioners .......................... 111
– SBR system................................ 111
– using the seat belts ................. 109
Servicing and care ......................... 183
– checking fluid levels ................ 187
– heavy-duty use of the car ..... 186
– regular checks ......................... 186
– scheduled servicing ................ 183
– scheduled servicing
plan ........................................ 184-185
Side bags ......................................... 126
– front si de bags ......................... 127
– general info rmation ................ 129
– window bags ............................ 127
Snow cha ins ................................... 139
Socket ............................................. 67
Spark plugs (type) .......................... 207
Speedometer ................................. 14
Start&Stop ...................................... 99
259-266 PUNTO Abarth GB 1ed 24-02-2012 10:08 Pagina 264