wing AUDI Q5 2017 Owner's Guide

a,
a,
..... N r-­N ..... 0 0
0:
co
,&_ WARNING
Read and follow all WARNINGS ¢ A in Driv­
ing the automatic transmission on
page 96.
(D Note
Coas ting downhil l w it h t he t ransm iss ion in N
and the engine not runn ing will result in dam ­
age to the automatic transmission and possi­
bly the catalyt ic converter.
(D Tips
- On vehicles with Audi drive select*, you can
adjust the sporty shift characteristics in the
Dynami c driv ing mode .Sw ill appear in the
i nstrument cl uster display instead of 0 .
- If you accidenta lly select N while driv ing ,
take your foot off the accelerator pedal im ­
mediately and wa it for the engine to slow
down to idle before selecting 0/S.
- Hybrid drive*: if the l<=1 •l button ¢
page 103
is pressed wh ile in sport mode S, the trans­
mission switches automatically to the nor­
mal mode 0 .
- If there is a power fa ilure, the selector lever
will not move o ut of the P posit ion . The
eme rgency release can be used if this hap­
pens
¢ page 99 .
Automatic Shift Lock (ASL)
-
The Automatic Shift Lock safeguards you against
accidentally shifting into a forward or the re­
verse gear and causing the vehicle to move unin ­
ten tionally.
•
F ig. 11 0 Shift gate: se le cto r lever lock pos it io ns and re ­
lea se butto n highlig h ted
D rivi ng
The selector lever lock is released as follows :
" Tur n the ignition on.
" Step on t he br ake pedal.
At the same time
press a nd ho ld the release bu tton on the side of
the gear se lector knob
¢ fig . 110 with yo ur
thumb until yo u have moved the selecto r lever
to the desired pos ition.
Automatic selector lever lock
T he selec tor leve r is lo cked in t he P and N posi ­
t io ns w hen the ig nition is tu rned on. You m ust
press the brake peda l and the release button to
select another position . As a reminder to the
driver, the following warn ing appears in the in ­
strument cluster d isplay when the se lector is in P
and N:
When stationary appl y brake pedal while select­
ing gear
T he Au tomatic Sh ift Lock only fu nctio ns when the
veh icle is stationary o r at spee ds be low 1 mph
(2 km/h).
At spee ds above abou t 1 mp h (2 km/h) the Au to­
ma tic Sh ift Lock is autom atically deact ivated in
the N positio n.
A time de lay e lemen t prevents the se lector lever
from lo cking whe n it i s moved thro ugh the N po­
s ition (going from R to D/S) . The locking element
will lock the selector leve r if the lever is left in N
(Ne utral) for more than approximately 1 second,
without the brake pedal being pressed.
Release button
T he release but ton on the selector leve r preve nts
the lever from be ing accidenta lly shifted into cer ­
ta in positions. Pressing this button deactivates
the se lector lever lock . Depending on the d irec­
t ion of the sh ift, the se lector lever locks at d iffer­
ent positions . The posit ions are highlighted in
the i llustration
¢ fig . 110.
Ignition key safety interlock
T he key cannot be removed from the ignition un ­
l ess the selector lever is in the P park position.
When the ignition key is removed , the selector
lever will be locked in the P position.
95

Hybrid
Hybrid
Hybrid drive
Introduction
Applies to: vehicles with hybrid drive
Gener al inform ation
The hybr id drive is a combined drive concept that
automatically switches between combustion en­
g ine and e lectr ic drive types or combines them.
All work on h igh voltage systems is intended only
for h igh voltage technicians and may only be per­
formed by authorized service facilit ies in accord­
ance w ith Aud i regulat ions.
The high voltage system is composed of the fol­ lowing h igh voltage components : the h igh volt­
age battery, the power electron ics, the e lectr ic
motor, the high voltage A/C compressor and the
orange high voltage wir ing.
High voltage battery
The high voltage battery is located in the luggage
compartment underneath the cargo floor. You do
not need to perform any maintenance work on
the high voltage batte ry. Additional informat io n
about the h igh vo ltage battery can be found un­
der
¢ page 107 .
The high voltage battery service plug is also
found underneath an orange cover under the car ­
go floo r. The service plug is provided only for use
by service personnel and must not be removed by
others who are not trained to use it.
A WARNING
The voltage in the high voltage system is life­ threatening . Touching a damaged high volt­
age component can result in a fatal electric
shock. The components in the high voltage
system are marked with a warning label which
warns against the h igh voltage .
- Never perform work on orange high voltage
cables or on high voltage components . Only
authorized repair fac ilities that are certified
may perform wo rk on the high voltage sys­
tem .
100
-Never open or remove the service plug cover
in the center of the cargo floor .
- Never damage, alter or
remove the orange
high voltage cable or disconnect it from the
high voltage system .
- Audi regulat ions must be followed during
all work performed on the high voltage sys­
tem and high voltage components.
A WARNING
While in electric dr ive mode, the veh icle pro­
duces considerably less idling, driving and op­
erating noise than when the combust ion en­
g ine is running. Th is may make it difficu lt or
impossible fo r othe rs such as pedestrians and
chi ldren to hear and notice the vehicle when it
is in ele ct rical drive mode . Th is can lead to
collisions and inj uries, for example in low
traffic areas, when maneuvering or when driv­ ing in reverse.
A WARNING
Never leave the vehicle unattended while in
the drive ready mode. The vehicle could begin moving if the accelerator pedal is pressed ,
even if the combustion engine is switched off .
This may ca use coll is ions and severe or fatal
injuries . When the vehicle enters dr ive ready
mode , the status message
h) Jrid ih. J ap­
pears br iefly in the instrumen t cluster display
and the need le in the powe r meter points to
READ Y ¢page 101.
- When exi ting the vehicle, make su re these­
lecto r lever is in the P position, the ignition
is switched off and the hybrid system is de­
activated.
(D Note
- T he h igh voltage system can be damaged if
the vehicle underbody comes into contact
with the ground . Immediately drive your
ve­
hicle to an authorized repair facility and
have it inspected.
- Do not transport fluids in open containers in
the luggage compartment. Spilled fluids
can seep underneath the cargo floor. Th is
can damage the high voltage system.
-

CD
CD
.... N ,-... N ..... 0 0 C<'. 00
Hybrid functions and operating modes
Applies to: vehicles wit h hybrid drive
Fig. 11 7 Cente r console: ,:::5v b utto n
.,. To turn on EV mode, press the 14" 1 button. The
indicator light i n the button w ill turn on . The
• indicator light also turns on in the instru­
ment cluster d isp lay.
T he funct ions and operating modes described be­
low are selec ted automat ica lly by the vehicle con­
tro l system , depend ing on the vehicle ope rating
stat us. This e nsur es t hat the vehicle is always in
the co rrect operating mo de. One exception is the
e n hanced ele ct ric dr iving mo de
(E V mode), wh ic h
is act ivated by the dr iver
¢ page 103.
Driving with the combustion engine
The vehicle is powe red by the combust ion eng ine .
The high vo ltage battery is charged s imultane­
ously , if needed.
Full acceleration (boost)
In full acceleration, the vehicle is powe red by
both the comb ust ion eng ine and t he e lec tric mo­
tor . T his operat ing mode is called
Boost and is
on ly available for a s hort amo unt of time because
i t uses so much energy. Av ailability depends o n
the hig h voltage batte ry cha rge level.
Th e boost operating mode is act ivated by p ress­
in g the ac celerator ped al all the way down.
Electric driving
T he vehicle can be driven completely e lec trically
depend ing on the high voltage battery charge
leve l and the driv ing resistance . The combust ion
e n gine t urns off a t that time .
Hybrid
The combustion engine s tarts when accelerati ng
o r when the high voltage battery cha rge level
drops below a ce rtain t hreshold . The vehicle re ­
s u mes electric driving once the acceleration and
the high vo ltage battery charge leve l permit .
Enhanced electric driving mode (EV mode)
Pressing the
l.al"I button ¢ fig. 117 can extend the
u su a l lim its on e lectr ic driving so that you can a l­
ways dr ive in e lectric mode, if the cond ition o f
the e lectr ica l system permits. The operating
mode is the n set to maximum e lectr ic dr ive @ ,
@¢ page 101, fig. 116 . It can be d riven com­
pletely e lect rically fo r up to 1.8 miles (3 km) at a
constant
37 mp h (60 km/h) .
The following conditions must be met to activate
the e nhanced electric drive:
- The high vo ltage battery m ust be s ufficiently
charged .
- The temperatu re of the
1 2 volt batteries an d
the high voltage battery must be sufficient.
- The ve hicle speed must not be h igher than
62 mph (100 k m/h).
- The transmission must not be in tipt ronic
mo de.
- O ffroad mode an d hill descen t ass ist mus t not
be turne d on
¢page 187.
The combustion engine turn s on and interrupts
t h e e nhanced ele ct ric dr ive mode when t he vehi­
cl e is acce le ra ted. The gray indicator light
B al­
so t urns on in the disp lay. The e nhanced electric
drive mo de resumes automatically once acce le ra­
t ion stops.
T he enhanced electric drive mode is deactivated
if at least one of the followi ng cond itions is met :
- The igni tion is tur ned off.
- Th e
l~· I button is pressed again .
- The high vo ltage battery charge level is low .
- The vehicle speed is higher than approximately
62 mph (100 km/h) .
- The
S selector lever position or tiptronic mode
is selected.
- Offroad mode or hill descent assist is switched
on .
T he
l"'-''I button m ust be pressed to react ivate it. ..,.
103

Hybrid
The connections in the engine compartment are
used for both charging and jump starting
c::> page 22 7 or c::> page 266.
Vehicle not ready to start. See owner's
manual
This message appears if the high voltage battery
charge level is too low. The vehicle can no longer
be started with its own power. The high voltage
battery must be charged with a charger or the ve­
h icle must be jump started with the aid of anoth­
er vehicle.
After the connecting the charger or jumper ca­
bles, the ignition must be turned off for approxi­
mately two minutes and then turned on again .
After no more than one m inute, one of the fol­
lowing indicator lights turns on in the instrument
cluste r display .
B Charging battery. Please wait ...
If the indicator light turns on and this message
appears, the high voltage battery is charg ing or
the vehicle is be ing jump started with assistance
from another veh icle .
If the 12 volt batteries are dead, the- indi­
cator light turns on . The charging procedure
takes longer in this case because the 12 volt bat­
ter ies are charged first. The procedure goes fast­
er with the ig nition sw itched off.
Vehicle ready to start.
This message appears if the charging procedure
was successful. The vehicle may be started again .
Battery could not be charged enough to start
vehicle .
This message appears if the charging procedure
was not successful or it was interrupted. Th is
may happen if the charger or the battery in the
veh icle that is assisting is too weak.
If the veh icle
can not be started, see an authorized repa ir facil i­
ty for ass istanc e.
(D Tips
-The charger should deliver a current of at
l east 30 A. Otherwise charging the high
voltage battery will take considerably Ion-
108
ger. A current between 50 A and 70 A is ide ­
al.
- Th e veh icle that is assisting should be some­
what within the same vehicle class when
jump starting a vehicle. A smaller vehicle's
battery may be drained.
- After approximately 30 minutes, the charg­
ing procedure ends because the ignit ion is
automatically turned off. If you would like
to cont inue to charge the battery, turn the
ignition on again.
Vehicle transport
App lies to: vehicles wit h hybrid drive
The following contains information you should
know about transporting your vehicle.
The lithium ion battery (SANYO 72 UF 121 285)
installed in your vehicle has passed test 38.3 in
accordance with UN handbook tests and criteria.
The vehicle may be transported with the battery
i nstalled as conventional class 9 hazardous mate­
rials without addit ional officia l consent for a ir
and sea transportation (current law !CAO-TI and
IMDG-Code 01.01.2012).

Audi adaptive cruise control and braking guard
c:::::, ___ c:::::,_ Distance 3 : This setting corresponds
to a distance of 164 feet/SO mete rs when trave l­
ing at 62 mph (100 km/h), or a time interval of 1.8 seconds .
c:::::, ____ c:::::, Distance 4 : This setting corresponds
to a distance of 210 feet/64 meters when trave l­
ing at 62 mph (100 km/h), or a time interval of
2 .3 seconds .
_&. WARNING
Following ot her vehicles too closely increases
the risk of collisions and ser ious personal in­
jury.
- Setting short distances to the traffic ahead
reduces the t ime and distance ava ilable to
br ing your vehicle to a safe sto p an d makes
i t eve n mo re necessary to pay close atten­
t ion t o traffic.
- Always obey applicable traffic laws, use
g ood ju dgment, and select a safe f ollow ing
di st ance f or th e tra ffic, road and we athe r
c ondition s.
¢j) Tips
- Distance 3
is set au tomati cally e ach time
yo u sw itch th e ig nit io n o n.
- Y our sta ndard setti ngs a re a uto mat ica lly
stor ed and as signed to th e re m ote contro l
k ey be ing used ¢
page 33 .
Setting the dr iving program
A pp lies to: ve hicles w ith Audi adaptive cruise co ntro l
Depending on t he se lec ted dr iv ing program and
d istance, dr iv ing behavior whe n accelerating wi ll
vary from dynamic to comfo rtable.
Setting the driving program for vehicles
without Audi drive select*
~ In the radio/ MM!*, selec t: !CARI function but ­
ton
> adaptive cruise control > Driving pro­
gram
> Comfort , Standard or Dynamic. Or
~ Se lect : I CARI funct ion button > Car systems*
contro l button > Driver assist > Adaptive cruise
control
> Driving program > Comfort, Stand­
ard
o r Dynamic .
114
Setting the driving mode for vehicles with
Audi drive select*
Refer to ¢page 123 .
(D Tips
Your set tings are automatic ally store d and as ­
signed to t he remote contro l key being used
¢ page 33 .
Request for driver intervention
App lies to: vehicles wi th Audi ada ptive c ru ise control
Fig. 131 I n str um ent cl uste r: re quest for driver interve n­
t io n
In certain situations, the system will prompt yo u
to take ac tion . This could happen, for example, if
braki ng by the adaptive cruise cont rol sys tem is
not en ough to ma in tain enough dis tance to t he
vehicle a he ad .
The ins trument cluster w ill warn you about the
dange r¢
fig . 131 :
-A red veh icle is pictured in the d isp lay.
- The te xt
DISTANCE! appears in the status bar .
- The red indicator light . blinks .
- In ad dition, a wa rni ng tone so unds .

Audi side assist
Audi side assist
Side assist
Description
Applies to: veh icles with Audi side assist
F ig. 133 Sensor detection range
Fig . 1 34 D isp lay on the exterio r m irror
Side assist helps you monitor your bl ind spot and
traffic behind your vehicle. Within the limits of
the system , it warns you about vehicles that are
comi ng closer o r that are traveling with you with­
in sensor range
(D c:> fig. 133 . If a lane c hange is
cl assified as c ritic al, the displ ay @ in the exter io r
m irro r
c:> fig. 134 turns on .
The display in the left exter ior mir ro r provides as­
sis tance whe n making a la ne change to the left,
while the disp lay in the rig ht exte rio r mi rror pro­
vides assis tance when mak ing a lane chan ge to
the right .
Information stage
As long as you do no t activate the turn signal,
side assis t
informs you about ve hicles tha t are
detected and class if ied as crit ic al. T he disp lay in
the respe ctive m irror turns on, but is dim .
118
The display remains dim intentionally in the in­
formation stage so that your view toward the
front is not disturbed .
Warning stage
If you activate the turn signal, side assis t warns
you about vehicles that are detected and classi­
fied as crit ica l. T he disp lay in the respective mir­
ror blinks bright ly.
If this happens, check traffic
by glancing in the rearview mirror and over your
shou lder
c:> .&. in General information on
page 119 .
{!) Tips
-You can adjust the brightness of the disp lay
@ i=>pagel20.
-Please refe r to the instructions for towing a
trailer located in
i=>page 119.

a,
a,
..... N r-­N ..... 0 0
0:
co
General information
Applies to: vehicles with Audi side assist
®
®
Fig. 1 35 D riving s it u at io ns
F ig. 136 Rear of the ve hicle: Pos it ion of th e se nso rs
S ide a ssist fu nctions a t spee ds above app roxi­
ma te ly 19 mph (30 km/h).
(D Vehicles that are approaching
In ce rtain cases, a vehicle will be classified as
cr itica l for a lane change even if it is still some­
what far away. The faste r a ve hicle app roaches,
t he soo ner the d isplay in the exterio r mirror w ill
t urn on.
@ Vehicles traveling with you
Vehicles traveli ng w ith you are ind icated i n the
exte rior m irro r if they are classified as critical for
a lane change. All vehi cles detec ted by side assist
Aud i side assist
are ind icate d by the time they ente r your "blind
spot", at the latest.
@ Vehicles left behind
If you s low ly pas s a vehi cle that s ide ass ist has
de te cted ( the differe nce in speed between t he
vehicle and you r vehicle is less than 9 mph or
15 km/h), the disp lay in t he exterior mirro r turns
o n as soon as the vehicle e nters your blind spot.
T he disp lay w ill not turn on if you quickly pass a
vehicle th at side ass ist h as de te cte d (t he differ­
ence in speed between the vehicle and your vehi ­
cle is greater tha n 9 mp h or 15 km/h) .
Functional limitations
The radar se nsors are des igned to detect the le ft
and right adj ace nt lane s when the ro ad l anes are
the normal width . In certa in situations, the dis­
play in the exterior mirror may turn on eve n
though there is no vehicle located in the area
that is critical for a lane change. For example:
- if the lanes a re narrow or i f yo ur are dr iv ing on
the edge o f you r lane. If t his is the case, the
system may have detected t he vehicle in anoth ­
er lane that is
not adjacent to your cu rrent lane.
- if you are dr iv ing through a curve. Si de assist
may react to a vehicle that is one lane over
from the adjacent lane.
- if s ide assist reacts to ot her objects (such as
high or disp laced guard ra ils).
- In poor weather conditions. The side assist
fu nctions a re limited .
D o no t cover the r adar senso rs
c> fig. 136 wit h
stickers, deposits, b icycle wheels or other o b­
jects, because th is wi ll affect the f unction . Do not
u se side assist when towing a t railer . For info r­
mation on cleaning , refer to
c> page 204.
A WARNING
- Always pay attention to traffic and to the
area around your veh icle . S ide assist cannot
replace a driver' s attention . T he driver alone
is always respo nsib le for la ne cha nges and
s im ila r dr iv in g ma neuve rs .
119

CD
CD
.... N ,-... N .... 0 0 C<'. 00
@ Tips
-Side assist is not active whi le you are ma k­
i ng the ad justment .
- Your settings are automatically stored and
ass igned to the remote control key being
u sed.
Driver messages
A ppl ies to: ve hicl es w ith Audi side assis t
If side ass ist switches off by itself, the LED in the
button turns off and a message will appear in the
i nstr ument cluster d is pl ay :
Audi side assist unavailable: Sensors blocked
The rada r senso rs ' vision is affected. Do not cover
the area in front of the sensors with b ike wheels,
sticke rs, dirt or other ob jects . Clean the area in
front of the senso rs, if necessary
c:> page 119,
fig . 136.
Aud i side assist: Currently unavailable
Side assist cannot be switched o n tempo rar ily be­
cause there is a malfunction (for exam ple, the
battery charge level may be too low).
Audi side assist: System fault!
The system cannot guarantee that it will detect
ve hicl es co rrectly and it is switched off. The sen ­
sors have been d isp laced or are faulty. Have the
system checked by an authorized Audi dealer or
author ized Audi Service Facility soon.
Audi side as sist: Unavailable when towing
Side assist sw itches off automatically when a fac ­
tory-installed trailer hitch is connected to the
e lectrical connector on the trailer. T he re is no
gua rantee the system will sw itch off when using
a retrofitted tra ile r hi tc h. Do not use s ide ass ist
when towing a trailer.
Aud i side assist
121

a,
a,
..... N r-­N ..... 0 0
0:
co
Selecting the driving mode
App lies to: vehicles wit h Audi drive select
You con choose between Comfort, Auto, Dynam­
ic and Individual* modes .
«>
~ 9
c:=====::::;: ~ a,
drive I I r.,. select _ - ~
Fig. 138 Center conso le: Co ntrol for drive se lect
Fig. 139 MMI*: Audi drive select
... To set the mode, press the r:i~ button
c>fig. 138 multip le times until the desired
mode is displayed in the instrument cluster. Or
Adjusting the Individual mode
Applies to: vehicles with Audi drive select and MMI
Audi drive select
... In the MMI*, select: ICARlfunction button>
Comfort , Auto , Dynamic or Individual*.
In vehicles without MMI*, the rn~, button is found
underneath the selector lever.
You can change the driving mode when the veh i­
cle is stationary or while driving.
If traff ic per­
mits, after changing modes, briefly take your
foot off the accelerator pedal so that the recently
selected mode is also activated for the engine
and transmission .
Comfort -provides a comfort-or iented vehicle
setup and is suited for long drives on highways.
Auto -provides a n overal l comfortab le yet dy­
namic driving feel and is suited for every day use.
Dynamic -gives the driver a sporty driving feel
and is suited to a spo rty driving style .
Individual* -c> poge 123.
A WARNING
-Pay attention to traffic when operating drive
se lect to prevent potential risk of an acc ident.
You can personally specify the vehicle setup in the MMI" .
... Se lect: I CARI function button > Set individual
control button. Once you se lect the menu, you
will automatically drive in the
individual mode .
The equipment in your vehicle will determine
which settings you can adjust. The following ta-
Systems Comfort
Engine/transmission
ba lanced
Steering comfortab le
Dynamic steering* comfortable/ind irect
Adaptive dampers * comfortable ble
provides an overview of the character istics of
each driving mode.
Auto Dynamic
balanced sporty
balanced sporty
balanced/d irect sporty/direct
balanced sporty
123

Parking aid
Reverse Parking
Applies to: vehicles w ith Aud i park ing system p lus w ith rear ­
view c amera
Parking mode 1 con be used when parking in a
garage or into a parking space.
Fig. 146 MMI disp lay: a iming at a parking spot
Fig. 147 MMI disp lay: align ing the vehicle
.,. Switch the MMI on and se lect reverse gear .
.,. Turn the steering wheel until the orange orien­
tation lines
(D appear in the parking spot
¢ fig . 146. Use the markings @to help you es­
timate the distance from an obstacle. Each
marking represents 3 ft (1 meter). The blue
area represents an extension of the vehicle's
outline by approximately 16
ft (S meters) to
the rear .
.,. While driving in reverse gear, adjust the steer­
ing wheel angle to fit the parking space with
the a id of the orange orientation lines ¢(D.
®
marks the rear bumper . Stop the vehicle when
the red orientation line© borders an object
¢,&. .
.&_ WARNING
- The rearview camera does not show the en­
tire area behind the vehicle¢
page 125,
128
fig. 142. Watch out especially for small chil­
dren and animals. The rearview camera can­
not always detect them, posing risk of an
accident!
- Please note that objects not touching the
ground can appear to be further away than
they really are (for example, the bumper of
a parked vehicle, a trailer hitch, or the rear
of a truck). In this case, you should not use
the help lines to help with parking, which
poses danger of an accident!
(D Note
In the MMI display, the direction of travel of
the vehicle rear is represented depending on
the steering wheel angle. The vehicle front
swings out more than the vehicle rear. Main­
tain plenty of distance so that your outside
mirror or a corner of your vehicle does not col­
lid e with any obstacles. This can damage to
your vehicle.