Citroen C4 2015 2.G Owner's Manual

08
349
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Press on Telephone to display the primary page.
Calling a new number
Calling a contact
Making a callUse of the telephone is not recommended while driving. W
e   recommended   that   you   park   safely   or   make   use   of   the  
steering

  mounted   controls.
Enter
 
the
 
phone
 
number
 
using
 
the
 
keypad
 
then
 
"

Call"
 
to
 
start
 
the
 
call.
Press on Telephone
 
to
 
display
 
the
 
primary
 
page.
Select "

Contacts".
Select
  the   desired   contact   from   the   list   offered.
Select "Call".
CONTACTS
Or make a long press on the steering mounted TEL   button.

08
350
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Calling a recently used number
Ending a call
It is always possible to make a call directly from the telephone; park the  vehicle   first   as   a   safety   measure.
Select "Call log
".
Press on Telephone   to   display   the   primary  
page.
Select

  the   desired   contact   from   the   list   offered. Select "End call".
CALL
LOG
or
Make
 
a
 
long
 
press
 
on
 
the
 
steering   mounted  
TEL

 
button.

08
351
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Ringtones
Select "Telephone Options".
Press on Telephone   to   display   the   primary  
page

  then   go   to   the   secondary   page.
Select "Ringtones".
You
  can   select   the   ringtone   used   and   adjust   its   volume.Select "Contacts". Press on Telephone
  to   display   the   primary  
page.
Select "

Add contact".
Select:
-
"New"   to   add   a   new   contact.
-
"Modify"   to   edit   the   selected   contact.
-
"Delete"   to   delete   the   selected   contact.
-
"Delete all"   to   delete   all   of   the   information  
for

  the   selected   contact.
Select "Confirm". Select "Directory information"
  for   the   number  
of

  entries   used,   available,   ...
Managing contacts / Entries
SETTINGS

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
The following table groups together the answers to the most frequently asked questions concerning your audio system.
FREqUENTLY ASKED q UESTIONS
352
q
UESTION
ANSWER SOLUTION
Navigation, guidance
The route calculation is
not   successful.
The   guidance   criteria   may   conflict   with   the   current   location   (exclusion   of  
toll

  roads   on   a   toll   motorway).
Check   the   guidance   criteria   on   the   Navigation  
Menu,

  "Guidance   options"\   "Define   calculation  
criteria".
I
  am   unable   to   enter   my  
post

  code.
The   system   only   accepts   post   codes   of   up   to   5   characters.
The   POIs   do   not   appear. The   POIs   have   not   been   selected.
Select   the   POIs   in   the   list   of   POIs.
The   risk   areas   audible  
warning

  does   not   work.
The   audible   warning   is   not   active.
Activate   audible   warnings   in   the   Guidance   options  
menu,

  "Navigation   -   guidance",   "Set   parameters  
for

  risk   areas".
The   system   does   not  
suggest

  a   detour   around  
an

  incident   on   the   route.
The   guidance   criteria   do   not   take   account   of  
TMC
  messages.
Select   the   "Traffic   info"   function   in   the   list   of  
guidance

  criteria.
I   receive   a   Risk   area   alert  
which

  is   not   on   my   route.
Other   than   guidance,   the   system   announces   all   Risk   areas   positioned   in   a  
cone

  located   in   front   of   the   vehicle.   It   may   provide   an   alert   for   a   Risk   area  
located

  on   nearby   or   parallel   roads.
Zoom   in   on   the   map   to   view   the   exact   position   of  
the

  Risk   area.   Select   "On   the   route"   to   no   longer  
receive

  alerts   other   than   guidance   or   to   reduce   the  
time

  for   the   announcement.

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
353
q

UESTION
ANSWER SOLUTION
Certain
 
traffic
 
jams
 
along

 
the
 
route
 
are
 
not
 
indicated

 
in
 
real
 
time.
On
 
starting,
 
it
 
is
 
several
 
minutes
 
before
 
the
 
system
 
begins
 
to
 
receive
 
the
 
traffic

 
information.
Wait
 
until
 
the
 
traffic
 
information
 
is
 
being
 
received  
correctly

 
(display
 
of
 
the
 
traffic
 
information
 
icons
 
on  
the

 
map).
The
 
filters
 
are
 
too
 
restrictive.
Modify
 
the
 
"Geographic
 
filter"
 
settings.
In
 
certain
 
countries,
 
only
 
major
 
routes
 
(motorways...)
 
are
 
listed
 
for
 
the
 
traffic

 
information.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is
 
dependent

 
on
 
the
 
traffic
 
information
 
available.
The altitude is not
displayed. On
 
starting,
 
the
 
initialisation
 
of
 
the
 
GPS
 
may
 
take
 
up
 
to
 
3
 
minutes
 
to
 
receive

 
more
 
than
 
4
 
satellites
 
correctly.
Wait
 
until
 
the
 
system
 
has
 
started
 
up
 
completely.
 
Check

 
that
 
there
 
is
 
a
 
GPS
 
coverage
 
of
 
at
 
least
 
4 satellites

 
(long
 
press
 
on
 
the
 
SETUP
 

button,
 
then  
select

 
"GPS
 
coverage").
Depending
 
on
 
the
 
geographical
 
environment
 
(tunnel...)
 
or
 
the
 
weather,
 
the

 
conditions
 
of
 
reception
 
of
 
the
 
GPS
 
signal
 
may
 
vary.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is

 
dependent
 
on
 
the
 
GPS
 
signal
 
reception
 
conditions.
T

elephone, Bluetooth
I
 
cannot
 
connect
 
my
 
Bluetooth

 
telephone.
The
 
telephone's
 
Bluetooth
 
function
 
may
 
be
 
switched
 
off
 
or
 
the
 
telephone
 
may

 
not
 
be
 
visible.
-
 
Check

 
that
 
your
 
telephone's
 
Bluetooth
 
function

 
is
 
switched
 
on.
-
 
Check

 
in
 
the
 
telephone
 
settings
 
that
 
it
 
is
 
"visible

 
to
 
all".
The
 
Bluetooth
 
telephone
 
is
 
not
 
compatible
 
with
 
the
 
system.
You
 
can
 
check
 
the
 
compatibility
 
of
 
your
 
telephone  
at

 
www.citroen.co.uk
 
(services).
The
 
volume
 
of
 
the
 
telephone connected
in

 
Bluetooth
 
mode
 
is
 
inaudible.
The

 
volume
 
depends
 
both
 
on
 
the
 
system
 
and
 
on
 
the
 
telephone.
Increase
 
the
 
volume
 
of
 
the
 
audio
 
system,
 
to
 
maximum

 
if
 
required,
 
and
 
increase
 
the
 
volume
 
of  
the

 
telephone
 
if
 
necessary.
The
 
ambient
 
noise
 
level
 
has
 
an
 
influence
 
on
 
the
 
quality
 
of
 
telephone
 
communication.
Reduce

 
the
 
ambient
 
noise
 
level
 
(close
 
the
 
windows,
 reduce

 
the
 
booster
 
fan
 
speed,
 
slow
 
down, ...).

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
354
q
UESTION
ANSWER SOLUTION
Some   contacts   are  
duplicated

  in   the   list.
The   options   for   synchronizing   contacts   are   synchronizing   the   contacts  
on

  the   SIM   card,   the   contacts   on   the   telephone,   or   both.   When   both  
synchronizations

  are   selected,   some   contacts   may   be   duplicated.
Select " d isplay SIM card contacts" or " d isplay
telephone   contacts".
Contacts are not shown
in   alphabetical   order.
Some   telephones   offer   display   options.   Depending   on   the   settings  
chosen,

  contacts   can   be   transferred   in   a   specific   order.
Modify   the   display   setting   in   the   telephone  
directory

.
The system does not receive
 SMS  text  messages.The Bluetooth mode does not permit sending SMS text messages to the system.
CD, MP3
The
 
CD
 
is
 
ejected
 
automatically

 
or
 
is
 
not
 
played

 
by
 
the
 
player. The C
d is inserted upside down, is unplayable, does not contain any
audio
  data   or   contains   an   audio   format   which   the   player   cannot   play.-
 
Check
  that   the   CD   is   inserted   in   the   player   the  
right

  way   up.
-
 
Check
  the   condition   of   the   CD:   the   CD   cannot  
be

  played   if   it   is   too   damaged.
-
 Check

  the   content   in   the   case   of   a   recorded
 CD:

  refer   to   the   advice   in   the   "AUDIO"   section.
-

The audio system's CD player does not play DVDs.
- Some recorded CDs will not be played by the audio system  because   they   are   not   of   the   correct   quality.
The CD has been recorded in a format that is not compatible with the player  (udf,...).
The
  CD   is   protected   by   an   anti-pirating   protection   system   which   is   not  
recognised

  by   the   audio   system.
There is a long waiting period  following   the   insertion of a C

d or connection of a
USB
  memory   stick.When a new medium is inserted, the system reads a certain amount of data  (directory,   title,   artist,   etc.).  This   may   take   from   a   few   seconds   to   a  
few

  minutes. This
  phenomenon   is   normal.
The C
d
player sound is
poor. The
  CD   used   is   scratched   or   of   poor   quality. Insert
  good   quality   CDs   and   store   them   in   suitable  
conditions.
The

  audio   equipment   settings   (bass,   treble,   ambiences)   are   unsuitable. Set   the   treble   or   bass   level   to   0,   without   selecting  
an

  ambience.

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
355
q

UESTION
ANSWER SOLUTION
Some
 
characters
 
in
 
the
 
media

 
information
 
are
 
not
 
displayed correctly while
playing.
The

 
audio
 
system
 
does
 
not
 
display
 
some
 
types
 
of
 
characters.
Use
 
standard
 
characters
 
to
 
name
 
tracks
 
and
 
folders.
Playing

 
of
 
streaming
 
files
 
does

 
not
 
start.
The
 
peripheral
 
device
 
connected
 
does
 
not
 
support
 
automatic
 
play. Start
 
the
 
playback
 
from
 
the
 
device.
The
 
names
 
of
 
tracks
 
and
 
the

 
track
 
length
 
are
 
not
 
displayed on the screen
when

 
streaming
 
audio.
The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer
 
of
 
this
 
information.
Radio
The
 
quality
 
of
 
reception
 
of the radio station
listened

 
to
 
gradually
 
deteriorates or the stored
stations do not function
(no

 
sound,
 
87.5 Mhz
 
is
 
displayed...).
The

 
vehicle
 
is
 
too
 
far
 
from
 
the
 
transmitter
 
used
 
by
 
the
 
station
 
listened
 
to

 
or
 
there
 
is
 
no
 
transmitter
 
in
 
the
 
geographical
 
area
 
through
 
which
 
the
 
vehicle

 
is
 
travelling.
Activate
 
the
 
"RDS"
 
function
 
by
 
means
 
of
 
the
 
short-cut

 
menu
 
to
 
enable
 
the
 
system
 
to
 
check
 
whether

 
there
 
is
 
a
 
more
 
powerful
 
transmitter
 
in
 
the  
geographical

 
area.
The
 
environment
 
(hills,
 
buildings,
 
tunnels,
 
basement
 
car
 
parks...)
 
block
 
reception,

 
including
 
in
 
RDS
 
mode.
This
 
phenomenon
 
is
 
normal
 
and
 
does
 
not
 
indicate  
a

 
fault
 
with
 
the
 
audio
 
system.
The
 
aerial
 
is
 
absent
 
or
 
has
 
been
 
damaged
 
(for
 
example
 
when
 
going
 
through

 
a
 
car
 
wash
 
or
 
into
 
an
 
underground
 
car
 
park).
Have
 
the
 
aerial
 
checked
 
by
 
a
 
CITROËN
 
dealer.
I
 
cannot
 
find
 
some
 
radio
 
stations in the list of
stations

 
received.
The
 
station
 
is
 
not
 
received
 
or
 
its
 
name
 
has
 
changed
 
in
 
the
 
list.
Some
 
radio
 
stations
 
send
 
other
 
information
 
in
 
place
 
of
 
their
 
name
 
(the
 
title

 
of
 
the
 
song
 
for
 
example).
The
 
system
 
interprets
 
this
 
information
 
as
 
the
 
name
 
of
 
the
 
station.
The
 
name
 
of
 
the
 
radio
 
station

 
changes.

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
356
q
UESTION
ANSWER SOLUTION
Settings, configuration
In   changing   the   setting  
of treble and bass the
equalizer

  setting   is  
deselected.
The
  selection   of   an   equalizer   setting   imposes   the   balance   settings.
Modifying   one   without   the   other   is   not   possible.
Modify   the   balance   or   equalizer   settings   to   obtain  
the

  desired   musical   ambience.
In   changing   the   equalizer  
setting,

  treble   and   bass  
return

  to   zero.
When   changing   the  
balance

  settings,   the  
distribution

  setting   is  
deselected.
The
  selection   of   a   distribution   setting   imposes   the   balance   settings.
Modifying   one   without   the   other   is   not   possible.
Modify   the   balance   or   distribution   settings   to  
obtain

  the   desired   musical   ambience.
When   changing   an  
distribution

  setting,  
the

  balance   setting   is  
deselected.
There is a dif

ference in
sound   quality   between  
the dif

ferent audio
sources   (radio,   CD...).
For   optimum   sound   quality,   the   audio   settings   for   Volume,   Bass,  
T
reble,  
Equalizer

  and   Loudness   can   be   adapted   to   the   different   sound   sources,  
which

  may   result   in   audible   differences   when   changing   source   (radio,  
CD...).
Check
  that   the   audio   settings   for   (Volume,   Bass,  
T

reble,   Equalizer,   Loudness)   are   adapted   to  
the

  sources   listened   to.   It   is   advisable   to   set   the  
AUDIO

  functions   (Bass,  
T
reble,   Fr-Re   balance,  
Le-Ri

  balance)   to   the   middle   position,   select   the  
"None",

  musical   ambience   and   set   the   loudness  
correction

  to   the   "Active"   position   in   CD   mode   or  
to

  the   "Inactive"   position   in   radio   mode.

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
357
q

UESTION
ANSWER SOLUTION
With
 
the
 
engine
 
off,
 
the
 
system

 
switches
 
off
 
after
 
a

 
few
 
minutes
 
of
 
use.
When
 
the
 
engine
 
is
 
switched
 
off,
 
the
 
system's
 
operating
 
time
 
depends
 
on
 
the

 
battery
 
charge.
The
 
switch-off
 
is
 
normal:
 
the
 
system
 
switches
 
to
 
economy
 
mode
 
and
 
switches

 
off
 
to
 
prevent
 
discharging
 
of
 
the
 
vehicle's
 
battery.
Start
 
the
 
vehicle's
 
engine
 
to
 
increase
 
the
 
battery  
charge.
USB, portable player

, connection key
Playback
 
of
 
my
 
USB
 
memory

 
stick
 
starts
 
only
 
after

 
a
 
very
 
long
 
wait
 
(around

 
2
 
to
 
3
 
minutes).
Some
 
files
 
supplied
 
with
 
the
 
memory
 
stick
 
may
 
greatly
 
slow
 
down
 
access
 
to

 
reading
 
the
 
memory
 
stick
 
(multiplication
 
by
 
10
 
of
 
the
 
catalogue
 
time).
Delete
 
the
 
files
 
supplied
 
with
 
the
 
memory
 
stick
 
and

 
limit
 
the
 
number
 
of
 
sub-folders
 
in
 
the
 
file
 
structure

 
on
 
the
 
memory
 
stick.
When
 
I
 
connect
 
my
 
iPhone as telephone and
to

 
the
 
USB
 
port
 
at
 
the
 
same

 
time,
 
I
 
am
 
unable
 
to

 
play
 
the
 
music
 
files.
When
 
the
 
iPhone
 
connects
 
automatically
 
as
 
a
 
telephone,
 
it
 
forces
 
the
 
streaming

 
function.
 
The

 
streaming
 
function
 
takes
 
the
 
place
 
of
 
the
 
USB
 
function which is then not useable, there is a period without sound of t\
he
track

 
being
 
played
 
with
 
Apple® players.
Disconnect   and   reconnect   to   the   USB   port   (the  
USB

  function   takes   priority   over   streaming).

358
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015