CITROEN C4 2018 Owners Manual

129
C4-cactus_en_Chap06_conduite_ed01-2016
Never select neutral (position N) when
moving.
Forward drive
F Press control D . T
he   indicator   lamp   in   the   control   comes   on.
D
  and   the   gear   engaged   appear   in  
t

he   instrument   panel.
The
  gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   action   on   the   part   of   the  
d

river.   It   continuously   selects   the   most   suitable  
g

ear   taking   account   of:
-
 
o
ptimisation   of   fuel   consumption,
-
 
d
riving   style,
-

r
oad conditions,
-
 
v
ehicle   load.
For
  optimum   acceleration,   when  
ov

ertaking   another   vehicle   for   example,  
p

ress the accelerator pedal fully down,
beyond
  the   point   of   resistance.
Temporary control of gear
changing
You can temporarily take over control of gear changes   using   the   steering   mounted   "+" and
"-"
control
  paddles:   if   the   engine   speed   allows,   the
 g

ear   change   is   carried   out.
This function allows you to anticipate certain
situations
 
s
uch  
a
s  
ov
ertaking  
a
nother  
v
ehicle  
o
r  
a

pproaching   a   bend.
After
  a   few   moments   without   any   action   on   the  
p

addles,   the   gearbox   resumes   control   of   gear  
c

hanging
 a
utomatically. To
  engage   reverse,   the   vehicle   must   be  
i

mmobilised   with   your   foot   on   the   brake.
F
P
ress control R
.
 T
he   indicator   lamp   in   the   control   comes   on.
Reverse
There is an audible signal on enga
gement o f r everse.
If
 
reverse   gear   is   requested   when   moving,  
t

he

N
 
warning   lamp   flashes   and   the   gearbox  
g

oes
 
into   neutral   automatically.
To
 
engage   reverse,   stop   the   vehicle   then,   with  
y

our
 
foot   on   the   brake   pedal,   press   control   N,
then R .
Do
 
not
 
press
 
the
 
brake
 
and
 
accelerator
 
p

edals
 
at
 
the
 
same
 
time:
 
this
 
could
 
c

ause
 
very
 
rapid
 
wear
 
of
 
the
 
clutch.
6
Driving

130
C4-cactus_en_Chap06_conduite_ed01-2016
Before switching off the engine:
- p ress control N to be in neutral,


or
-
 
l
eave   the   vehicle   in   gear;   in   this   case   the  
v

ehicle   cannot   be   moved.
Stopping the vehicle
For all parking situations, you must
ap ply the parking brake  to   immobilise  
t

he   vehicle.
When
  immobilising   the   vehicle   with  
t

he   engine   running,   you   must   select  
neu

tral

N.
Operating fault
- - - appears in the instrument panel.
F

P

ress control N .
F
 
P

ress
  the   brake   pedal.
F
 
W

ait
 
for   around   30   seconds   until   N or a
gear
 
appears   in   the   instrument   panel.
F

P

ress control D , then N.
F
 
W

ith
 
your   foot   still   on   the   brake   pedal,   start  
t

he
 eng
ine.
The
 
gearbox   is   operational   again.
Reinitialisation
(5-speed electronic
gearbox)
Following disconnection of the battery, it is necessary   to   reinitialise   the   gearbox.
F
 
S
witch   on   the   ignition.
In
  exceptional   circumstances,   the  
g

earbox   may   need   an   automatic  
r

einitialisation:   starting   and   gear  
c

hanging   are   no   longer   possible.
- - -
  appears   in   the   instrument  
pan

el.
Follow
  the   procedure   described   above.
Before
 
d

oing
 
a

nything
 
u

nder
 
t

he
 
b

onnet,
 
e

nsure that control N has been pressed
and
 
that
 
the
 
parking
 
brake
 
is
 
applied. With
  the   ignition   on,   illumination   of  t
his   warning   lamp,   accompanied   by  
a

n   audible   signal   and   a   message,  
i

ndicates   a   gearbox   fault.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Driving

131
C4-cactus_en_Chap06_conduite_ed01-2016
Hill start assist
System which keeps your vehicle immobilised temporarily   (approximately   2   seconds)   when  
s

tarting   on   a   gradient,   the   time   it   takes   to  
m

ove   your   foot   from   the   brake   pedal   to   the  
a

ccelerator
 ped
al.
This
  system   only   operates   when:
-
 
t
he   vehicle   is   completely   stationary,   with  
y

our   foot   on   the   brake   pedal,
-
 
c
ertain   conditions   of   slope   are   met,
-
 
w
ith   the   driver’s   door   closed.
The
  hill   start   assist   system   cannot   be  
d

eactivated. On an ascending slope, with the vehicle
stationary, the vehicle is held momentarily
when you release the brake pedal, provided
that:
-
 
y
ou   are   in   first   gear   or   neutral   with   a  
m

anual
 g
earbox,
-

y
ou are in position D with an electronic
gearbox.Operation
On a descending slope, with the vehicle
stationary and reverse gear engaged, the
vehicle is held momentarily when you
release the brake pedal.
Operating fault
If a fault in the system occurs, these warning l amps   come   on,   accompanied   by   an   alert  
m

essage.   Contact   a   CITROËN   dealer   or  
a

  qualified   workshop   to   have   the   system  
c

hecked.
Do
 
not
 
leave
 
the
 
vehicle
 
while
 
it
 
is
 
being
 
h

eld
 
in
 
the
 
hill
 
start
 
assist
 
phase.
If
 
you
 
need
 
to
 
exit
 
the
 
vehicle
 
with
 
t

he
 
engine
 
running,
 
apply
 
the
 
parking
 
b

rake.
6
Driving

132
C4-cactus_en_Chap06_conduite_ed01-2016
Stop & Start
Operation
Going into engine STOP
mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , when stationary,
in neutral, and you release the clutch
pedal.
-

w

ith an electronic gearbox , when
stationary
  or   at   speeds   below   5   mph  
(

8 km/h)   (depending   on   version),   in   neutral  
(

control on N )
  or   when   you   press   the   brake  
ped

al. Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable for a few seconds after
coming
  out   of   reverse   gear.
The
  Stop   &   Start   system   does   not   affect  
t

he   the   vehicle's   other   systems,   such   as  
f

or   example   braking,   power   steering...
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.
Stop & Start time
counter
A cumulative time counter for periods i n   STOP   mode   during   a   journey.
It
 
is
 
displayed   in   the   trip   computer   (accessible  
v

ia the " Driving assistance "
  menu   of   the  
t

ouch
 
screen   tablet).
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
The
 
Stop
 
&
 
Start
 
system
 
requires
 
t

he use of a 12 V battery of special
technology
 
and
 
specification.
 
All
 w
ork
 
on
 
this
 
type
 
of
 
battery
 
must
 
o

nly be done by a CITROËN dealer
or
 
a
 
qualified
 
workshop.
 
For
 
more
 
i

nformation
 
on
 
the
 
12
 
V
 
battery,
 
refer
 
to
 
t

he
 
corresponding
 
section.
Driving

133
C4-cactus_en_Chap06_conduite_ed01-2016
Going into engine START
mode
The "ECO" warning   lamp   goes   off  a
nd   the   engine   starts   automatically:
-

w

ith a manual gearbox , when you fully
depress
  the   clutch   pedal.
-

w

ith an electronic gearbox:
●
 
c

ontrol  
o
n  
D,

 
w
hen  
y
ou  
r
elease  
t
he  
b
rake  
ped

al,
●
 
c

ontrol   on   N   and   brake   pedal   released,  
w

hen you press control D ,
●
 w

hen
 y
ou
 enga
ge
 r
everse. START
  mode   is   invoked   automatically   when:
-  y ou   open   the   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   7   mph  
(11
  km/h)   with   an   electronic   gearbox,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
Special cases: START invoked
automatically
In this case the "ECO" warning  l
amp   flashes   for   a   few   seconds,   then  
g

oes off.
This operation is perfectly normal.
Special cases: STOP mode not
available
STOP mode is not invoked principally when:
-  t he   vehicle   is   on   a   steep   slope   (rising   or  
f

alling),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   by   the  
d

river,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning  
l

amp   flashes   for   a   few   seconds   then  
g

oes off.
This operation is perfectly normal.
6
Driving

134
C4-cactus_en_Chap06_conduite_ed01-2016
A fault with the system is signalled in the " Driving assistance "
  menu  
(

primary   page)   of   the   touch   screen  
t

ablet.
Operating fault
In the event of a fault with the system, the   symbol   in   the button   changes   to   alert m

ode   and   the   indicator   lamp   flashes   for   a
 f

ew   moments   then   stays   on   continuously.
If you press this button to reactivate the
system,  the   indicator   lamp   flashes   again   for   a  
f

ew   moments   and   then   stays   on   continuously.
In
 
certain
 
circumstances,
 
such
 
as
 
the
 
need
 
t

o
 
maintain
 
a
 
comfortable
 
temperature
 
in
 
the
 
p

assenger
 
compartment,
 
it
 
may
 
be
 
preferable
 
t

o
 
deactivate
 
the
 
Stop
 
&
 
Start
 
system.
The
 
system
 
can
 
be
 
deactivated
 
at
 
any
 
time,
 
o

nce
 
the
 
ignition
 
is
 
on.
If
 
the
 
system
 
is
 
deactivated
 
while
 
in
 
S

TOP mode,
 
the
 
engine
 
then
 
restarts.
The
 
Stop
 
&
 
Start
 
system
 
is
 
automatically
 r
eactivated
 
every
 
time
 
the
 
engine
 
is
 
started.
Deactivation
The Stop & Start system can be deactivated a
nd   manually   reactivated   in   the   touch   screen  
t

ablet. F

Sel
ect "
Stop & Star t " in the
" Driving assistance "   menu.
When   the   system   is   deactivated,   the   indicator  
l

amp   in   this   button   comes   on   continuously.
When
  the   system   is   reactivated   manually,   the  
i

ndicator   lamp   in   this   button   goes   off.Have
  it   checked   by   a   CITROËN   dealer   or   a  q
ualified w orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.
All
  of   the   instrument   panel   warning   lamps  
come
  on.Depending
  on   version,   an   alert  
m

essage   may   also   be   displayed,   asking  
y

ou   to   change   to   neutral   (control   on   N)
and
  put   your   foot   on   the   brake   pedal.
You
  must   switch   off   the   ignition,   then  
s

tart   the   engine   again.
Before
 
doing
 
anything
 
under
 
the
 
b

onnet, deactivate the Stop & Start
system
 
to
 
avoid
 
the
 
risk
 
of
 
injury
 
r

elated
 
to
 
an
 
automatic
 
change
 
to
 
S

TART mode.
Opening the bonnet
Driving on flooded roads
Before
 
driving
 
through
 
a
 
flooded
 
road,
 
i

t
 
is
 
strongly
 
recommended
 
that
 
you
 
d

eactivate
 
the
 
Stop
 
&
 
Start
 
system.
For
 
more
 
advice
 
on
 
driving,
 
particularly
 
o

n flooded roads, refer to the
corresponding
 s

ection.
Driving

135
C4-cactus_en_Chap06_conduite_ed01-2016
Steering mounted controls
6. Speed  limiter   on   /   pause   indication.
7. P rogrammed   speed   setting.
8.
 S

peed   limiter   mode   selection   indication.
Speed limiter
System which prevents the vehicle from exceeding the speed programmed by the driver.
The speed limiter cannot, in any circumstances, replace   the   need   to   observe   speed   limits,   nor   can   it r

eplace   the   need   for   vigilance   on   the   part   of   the   driver.
1. Select  speed   limiter   mode.
2. D ecrease   value.
3.
 In

crease
 v
alue.
4.
 S

peed   limiter   on   /   pause.
5.
 L

ist   of   memorised   speeds   display   button.
Display in the instrument panelThe programmed speed remains in the system memory   when   the   ignition   is   switched   off.
6
Driving

136
C4-cactus_en_Chap06_conduite_ed01-2016
Switching on / Pause
F Turn wheel 1 to the "LIMIT" position:   the  s
peed   limiter   mode   is   selected   but   is   not  
s

witched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4, if the speed displayed
is suitable (by default, the last speed
programmed).
F
 
Y
ou   can   temporarily   stop   the   the   speed  
l

imiter   by   pressing   button   4   again:   the  
d

isplay   confirms   that   it   has   been   stopped  
(

Pause). After
  first   selecting   speed   limiter   mode   (wheel   1
in position " LIMIT"),
  you   can   modify   the   speed  
s

etting   by:
-

a p
ress on button 5:
F
 
t
he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
c
hoosing   a   speed:   it   is   displayed   in   the  
in

strument
 pan
el.
T

he selection screen closes after a
few moments. Speed
  limits   can   be   memorised   in   the  
"

Driving assistance"
 
menu.
For
  more   information   on   memorising  
s

peeds,   refer   to   the   corresponding  
s

ection.
You do not have to switch the speed
limiter
  on   in   order   to   set   the   speed.
The   speed   limiter   is   switched on

manually:   it   requires   a   programmed  
s

peed   of   at   least   20   mph   (30   km/h).
Adjusting the speed limit
setting
Or:
-
 u sing   buttons   2 and 3,
  increasing   or  
d

ecreasing   the   speed   displayed:
F
 
b
y   successive   short   presses,   to   modify  
b

y   +   or   -   1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
o

f   +   or   -   5   mph   (km/h).
Driving

137
C4-cactus_en_Chap06_conduite_ed01-2016
On sharp acceleration, as when
descending  a   steep   hill,   the   speed  
l

imiter   will   not   be   able   to   prevent  
t

he   vehicle   from   exceeding   the  
pro

grammed
 s
peed.
The
  limiter   is   temporarily   deactivated  
a

nd   the   displayed   programmed   speed  
f

lashes.
An
  audible   signal   accompanies   the  
f

lashing   of   the   programmed   speed  
w

hen   exceeding   the   speed   is   not   due   to  
a

n   action   by   the   driver.
The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   speed   limiter.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Flashing
 
of
 
the
 
dashes
 
indicates
 
a
 
fault
 
with
 
the
 sp
eed l
imiter.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
Operating fault
Switching off
F Turn wheel 1 to the "0" p osition. T
he   display   of   information   related   to   the  
sp

eed
 l
imiter
 d
isappears.
F
Press
firmly on the accelerator pedal,
going   beyond   the   point of resistance
, to
exceed   the   programmed   speed   limit.
The   speed   limiter   is   deactivated   temporarily  
a

nd   the   displayed   programmed   speed   flashes.
Temporarily exceeding the
programmed speed
As soon as the vehicle's speed returns to the p
rogrammed   value,   the   limiter   operates   again:  
t

he   display   of   the   programmed   speed   setting  
b

ecomes   steady   again.
An
  audible   signal   accompanies   the  
f

lashing   of   the   programmed   speed  
w

hen   exceeding   the   speed   is   not   due   to  
a

n   action   by   the   driver   (steep   hill...).
6
Driving

138
C4-cactus_en_Chap06_conduite_ed01-2016
Steering mounted controls
6. Cruise  control   pause   /   resume   indication.
7. P rogrammed   speed   setting.
8.
 C

ruise   control   mode   selection   indication.
Cruise control
System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal.
The cruise control system cannot, in any   circumstances,   replace   the   need   to o

bserve   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.
You
  are   advised   to   keep   your   feet   near   the
 p

edals   at   all   times.
1. Select  cruise   control   mode.
2. P rogramme   a   speed   /   Decrease   the   value.
3.
 P

rogramme   a   speed   /   Increase   the   value.
4.
 P

ause   /   resume   cruise   control.
5.
 D

isplay   the   list   of   memorised   speeds.
Display in the instrument panelSwitching off the ignition cancels any programmed   speed   value.
Driving