display HONDA CR-Z 2016 1.G Navigation Manual

113
Navigation
Changing Your Route
HHOME uNavi uMENU (when en route)
This section describes how to alter your ro ute, add an interim “waypoint” (pit stop),
choose a different destination, cancel your current destination, and continue your
trip after stopping.
Select an item.
The following items are available:
• Voice : Select to hear the voice guidance when en route.
2Listening to Voice Guidance P. 106
•Change Route Preference : Changes the route preferences (calculating method).
2Route Preference P. 41
•Destination List : Shows a list of waypoints. You can delete waypoints or edit the
order of them.
2 Editing the Destination List P. 118
•Cancel Route : Cancels the route guidance.
2Canceling the Route P. 120
•View Routes : Displays three different routes.
2Viewing the Routes P. 101
•Detour : Calculates a detour route.
2Taking a Detour P. 120
•Avoid Streets : Avoids streets along your route.
2Avoiding Streets P. 121
1Changing Your Route
“Display Menu” (on the map screen, when en
route)
If you select MENU on the map screen when not en
route, the Destination me nu screen is displayed.
2 Entering a Destination P. 82
16 CR-Z NAVI-31SZT8500.book 113 ページ ２０１５年７月３０日　木曜日　午前９時１８分

114
uuChanging Your Route uAdding Waypoints
Navigation
Adding Waypoints
Add up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map
screen as small, numbered red flags.
The route follows the waypoints in
the order they are listed in the
Destination List.1 Adding Waypoints
Waypoints allow you to stop for gas or food, for
example, and then continue on to your destination.
Select the (Navi/Back) icon to return to the map
screen without adding a waypoint at any time.
The search corridor used fo r adding waypoints can be
adjusted. 2 Edit POI Search Radius Along Route P. 45
You can delete waypoints or edit the order of
waypoints in the Destination List. 2 Editing the Destination List P. 118
16 CR-Z NAVI-31SZT8500.book 114 ページ ２０１５年７月３０日　木曜日　午前９時１８分

uuChanging Your Route uAdding Waypoints
116
Navigation
2. Select a place.
u The waypoint is added to the
Destination List.
3. Select or , and move the
order of destinations. Select OK.
4. Select Start Route .
u The route is automatically
recalculated and displayed on
the map screen.1Adding Waypoints from the Route Menu
If you select a location by Use Navigation Menu,
the Select order scre en is not displayed.
Select Edit Order on the Destination list screen to
edit the order of waypoints.
2 Editing the Destination List P. 118
16 CR-Z NAVI-31SZT8500.book 116 ページ ２０１５年７月３０日　木曜日　午前９時１８分

117
uuChanging Your Route uAdding Waypoints
Navigation
1. Select a new address or location.
2. Select Set as Destination.
3. Select or and select a
location.
4. Select OK.
u The route is automatically
recalculated and displayed on
the map screen.
■Adding Waypoints from the Calculate Route Screen
16 CR-Z NAVI-31SZT8500.book 117 ページ ２０１５年７月３０日　木曜日　午前９時１８分

118
uuChanging Your Route uEditing the Destination List
Navigation
Editing the Destination List
H HOME uNavi uMENU (when en route) uDestination List
1. Select Edit Order .
2. Select a list item to move.
3. Select or , and select a new
location. Select OK.
4. Select Start Route .
u The route is automatically
recalculated and displayed on
the map screen.
■Editing the Order of Waypoints1
Editing the Order of Waypoints
Select Show All on Map to display the destination
and waypoints on the map screen.
16 CR-Z NAVI-31SZT8500.book 118 ページ ２０１５年７月３０日　木曜日　午前９時１８分

119
uuChanging Your Route uEditing the Destination List
Navigation
H HOME uNavi uMENU (when en route) uDestination List
1. Select a list item to delete.
2. Select Delete .
■Deleting Waypoints1
Deleting Waypoints
Select Delete on the Destination list screen before
selecting a list item to select multiple locations to
delete.
Select Show on Map to display the waypoint on the
map screen.
16 CR-Z NAVI-31SZT8500.book 119 ページ ２０１５年７月３０日　木曜日　午前９時１８分

123
uuChanging Your Destination uSelecting a Destination on the Map
Navigation
Selecting a Destination on the Map
Select a new destination when en route by selecting a location on the map.
1.Scroll the map to position the
cursor over your desired
destination, adjusting the map
scale as necessary.
u If the address displayed is not
the desired location, select
BACK and repeat the
procedure.
2. Select an icon from the right side
of the screen.
3. Select Set as Destination .
2Calculating the Route P. 100
4.Select Clear Current Route or
select a location to add to the
destination list.
u The route is automatically
recalculated and displayed on
the map screen.
1Selecting a Destination on the Map
Select the list open/clos e tab to open the list.
2 Map Screen during Scrolling P. 12
The following icons are available.
•: Traffic*
•: Map Icon
•: Exit Info*
•: Street•: Address Book/Home
* These icons are only available in certain areas.
If there is more than one landmark icon under the
map cursor, you are prompted to select a place from
a list.
When you select a traffic in cident icon, you can check
the traffic information for the selected location.
Limited coverage only
16 CR-Z NAVI-31SZT8500.book 123 ページ ２０１５年７月３０日　木曜日　午前９時１８分

124
uuChanging Your Destination uEntering a New Destination
Navigation
Entering a New Destination
H HOME uNavi uMENU (when en route) uDestination tab
Enter a new destination using the Destinat ion menu screen even when you are en
route.
1.Select a method to enter a new
destination.
2 Entering a Destination P. 82
uAfter entering a new
destination, the address is
displayed on the Calculate
Route screen.
2. Select Set as Destination.
3. Select Clear Current Route or
select a location to add to the
destination list.
u The route is automatically
recalculated and displayed on
the map screen.
1Entering a New Destination
“Display Menu” (on the map screen)
16 CR-Z NAVI-31SZT8500.book 124 ページ ２０１５年７月３０日　木曜日　午前９時１８分

125
Navigation
Resuming Your Trip
Stop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on
your route.
If you did not complete your route, the Co ntinue trip to screen is displayed when
you restart your vehicle.
Select Set as Destination.
u You can continue on the same
route.
• View Routes : Displays three different routes.
2Viewing the Routes P. 101
•Route Preference : Changes the route preferen ces (calculating method).
2Route Preference P. 41
1Resuming Your Trip
The Continue trip to screen has the same options as
when you calculate a route. 2 Calculating the Route P. 100
To cancel your de stination, select BACK.
Search Nearby
You can find the nearest place/landmark (e.g.,
nearest gas station) by specifying a category. 2 Find Nearest Place P. 122
Call
You can place a phone call to the destination phone
number.
2 Bluetooth ® HandsFreeLink ® P. 166
Edit/Delete Entry
You can edit or delete the address book entry.
2 Editing an Address Book Entry P. 33
When you restart the vehicle, the route is
recalculated without the sele cted traffic incidents to
avoid. 2 Traffic Rerouting
TM Manually P. 112
16 CR-Z NAVI-31SZT8500.book 125 ページ ２０１５年７月３０日　木曜日　午前９時１８分

129
uuAudio System uAudio System Theft Protection
Audio
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as
when the battery is disconnected or goes dead. In certain conditions, the system
may display Enter Code. If this occurs, reactivate the audio system.
■ Reactivating th e audio system
1. Set the power mode to ON.
2. Turn on the audio system.
3. Press and hold the audio system powe r button for more than two seconds.
u The audio system is reac tivated when the audio c ontrol unit establishes a
connection with the vehicle control unit. If the control unit fails to recognize
the audio unit, you must go to a deal er and have the audio unit checked.
16 CR-Z NAVI-31SZT8500.book 129 ページ ２０１５年７月３０日　木曜日　午前９時１８分