Hyundai Santa Fe 2017 Car Multimedia System

Setup I 9-9
Clock Settings
Provides t\fe time and \Pdate settings.
Provides t\fe GPS Time, Date/Time
Settings, Daylig\ft Savings Time, Time
Zone, and 24 Hours opt\Pions.
Wi-Fi Settings
You can s\fare a digital-device network
wit\f t\fe ve\ficle device t\froug\f Wi-Fi.
FeaturesDescription
Wi-FiTurn on/off Wi-Fi.
MAC
Address Displays t\fe MAC address.
Refres\fSearc\fes available net
-
works near t\fe ve\ficle.
Network
Name Displays available network
AP (Access Point) names.
Add Wi-Fi
Network Enter t\fe network ID/
password to connect to a
\fidden network AP (Access
Point).
How to \fonnect to a Network
1. In t\fe Wi-Fi settings of a digital device,
activate Internet s\faring (\fot spot).
2. In t\fe ve\ficle network list, select t\fe
desired device to connect to. Enter t\fe
password to connect, if\P any.
09

9-10 I Setup
Language Settings
You can configure t\fe displayed system
language.
W\fen t\fe language i\Ps c\fanged, t\fe
system language is\P automatically
c\fanged.
Unique data including MP3 file name is
not c\fanged and some languages don’t
support voice recognition.
Keyboard Settings
You can configure t\fe keyboard layout for
eac\f language.
You can configure ABCD or QWERTY
keyboards for t\fe system.
i Information
• Configured keyboard layouts are applied to all
input modes.
Downloaded Apps Settings
Displays t\fe applications t\fat were down-
loaded t\froug\f t\fe D\Pownload Center. \biew
t\fe memory status of installed applications
or delete t\fem.
You can delete downloaded applications in
t\fe Download Center. To recover a deleted
application, you can re-install t\fe applica -
tion wit\f t\fe re-download function in t\fe
Download Center.

Setup I 9-11
Screen Saver Settings
You can select any of t\fe following screen
formats to be displayed w\fen t\fe screen
or power is turned off.
•Digital clock and date
•Analog clock and date
•No display
Connectivity Settings
You can select t\fe mode to run w\fen
an Android device is connected. If not
selected, t\fe mode does not run exclu -
sively.
Android Auto
If Android Auto is c\fecked, you can use
t\fe functions of your Android p\fone w\Pit\f
a USB cable and Bluetoot\f co\Pnnected. It
enables t\fe Android Auto functions. T\fe
latest version of Android \Pmust be installed
on t\fe p\fone (Andro\Pid 5.0 and above).
W\file Android Auto is running, you cannot
use some features.
i Information
• T\fis setting is disabled w\fen a device is
connected to t\fe ve\ficle USB port.
09

9-12 I Setup
At t\fe System Info screen, software ver-
sion information, updates, and storage
status details are\P available.
Features Description
SW InfoSystem version informa
-
tion and update details are
available.
Select t\fe button
to update t\fe system. After
update is complete, t\fe
system will reboot auto-
matically.
Storage Displays t\fe memory space
available for media files
and applications.
System Update
At t\fe System Info screen, insert t\fe
updated memory (USB or SD card) wit\f
t\fe latest file downloaded, and t\fen select
t\fe
button to begin updating. T\fe
system will t\fen re\Pboot automatically.
i Information
• T\fis product needs supplemented software
updates, additional new functions, and
renewed maps, w\fic\f collectively may take
some time to complete, depending on t\fe
amount of data.
\fAUTION
• If t\fe power is disconnected or t\fe USB or
SD card is removed during an update, t\fe
data mig\ft be damaged. Please wait until t\fe
update is complete\P w\file t\fe engine i\Ps on.

Product Specificat\sion
Troubles\footing
FA\b
part.10 Appendix
10

10-2 I Appendix
Product Specification
TFT-LCD
Screen Size Navigation Device - 8 inc\f(176.4\s x 99.36mm)
Resolution Navigation Device - 384,000 pix\sels
(Resolution: 800 x 480)
Operating
Met\fod TFT(T\fin Film Transistor) Active Matrix
Viewing Angle Left/Rig\ft, Top/Bottom: ALL 89 °

Internal
Lig\fting LED
Radio
C\fannels FM: 87.5 MHz ~ 107.9 \sMHz(Step: 200 kHz)
AM: 530 kHz ~ 1710 kH\sz(Step: 10 kHz)
Sensitivity FM: Under 10dBu/AM: Under 35dBu
Distortion
Factor Wit\fin 2%
Common
Name
Car TFT LCD Display Navigation Unit
Power Supply DC 14.4V Operating
PowerDC 9V ~ DC 16V
Current
Consumption 2.5A Sleep
Current0.5mA
(Head Unit Only)
Operating
Temperature -20 ~ +70
℃
(-4 ~ +158
℉) Storage
Temperature -40 ~ 85
℃
(-40 ~ 185℉)
Dimensions 178 X 102 X138mm (\sMain BOX)
Weig\ft 2.7kg
Wi-Fi Details
Frequency2412 ~ 2462MHz
Specification 802.11b/g/n
Number of
C\fannels 11 c\fannels
Operating
Temperature -20 ~ +70
℃
(-4 ~ +158
℉)
Appendix

Appendix I 10-3
\fODE\f RF S\bEC
LTE RX
Frequency
2110MHz~2155MHz(B4\s),
746MHz~756MHz(B13)\s
Sensitivity -93.3dBm under@20M\s(B4), -93.3dBm
under@10M(B13) (T\fr\soug\fput ≥95%)
TX Frequency
1710MHz~1755MHz(B4\s),
777MHz~787MHz(B13)\s
Max RF
Output Power Power Class3(B4, B13),\s
20.3dBm ~ 25.7dBm \s(conducted)
CDMA RX
Frequency
869MHz~894MHz(BC0)\s,
1930MHz~1990MHz(BC\s1)
Sensitivity -104dBm under(FER =\s 0.5% under)
TX Frequency
824MHz~849MHz(BC0)\s,
1850MHz~1910MHz(BC\s1)
Max RF
Output Power Power Class3(BC0),
Power Class2(BC1),
23.01dBm ~ 30dBm(c\sonducted)
Bluetooth® Wireless Technology
Frequency
Range
2402 ~ 2480 MHz Supported
Bluetoot\f®
Specification 3.0
Supported
Profile Handsfree(1.6), A2D\sP(1.2), AVRCP(1.4), PBAP(1.0\s)
Output 0.125mW
Number of
C\fannels 79 c\fannels
CAUTION
• T\fe producer and installer cannot provide services related to life
safety as t\fe concerned radio equipment is l\siable to radio interference.
10

10-4 I Appendix
Troubleshooting
1. Errors w\fic\f occur during t\fe operation or installation of t\fe
device may be mistaken as a malfunction\s of t\fe actual device.
2. If you are \faving problems wit\f t\fe device, try t\fe suggestions
listed below.
3. If t\fe problems persist, contac\st your Hyundai dealer.
Problem Possible Cause
T\fere are small red\s,
blue, or green dots on
t\fe screen
• Because t\fe LCD is manufactured wit\f
tec\fnology requiring \fig\f point density,
a pixel or lig\fting deficiency may occur
wit\fin 0.01% of tot\sal pixels
T\fe sound or image \sis
not working
• Has t\fe Switc\f for t\fe ve\ficle been turned
to [ACC] or [ON]?
•Has t\fe SYSTEM been\s turned OFF?
T\fe screen is being \sdis-
played but sound is not
working
• Has t\fe volume been set to a\s low level?
•Has t\fe volume been muted?
W\fen t\fe power is
turned on, t\fe corners of
t\fe screen are dark
• T\fe display appearing somew\fat dark
after prolonged periods of use is normal
wit\f LCD panels. It is not a malfun\sction
•If t\fe screen is very dark, contact your
nearest Hyundai dealer for assistance
Sound is working from
only one speaker
• Are t\fe positions of Fader or Balance
sound controls adju\ssted to only one si\sde?
Problem Possible Cause
Sound does not work in
AUX mode
• Are t\fe audio conne\sctor jacks fully
inserted into t\fe AUX terminal?
T\fe external device is
not working
• Is t\fe external device connected wit\f a
standard connector \scable?
Upon turning power on,
t\fe most recent mode
screen is not displa\syed Wit\fin modes t\fat play files by reading
external sources, suc\f as discs, USB, iPod,
or Bluetoot\f
® streaming mode, t\fe most
recently played mode screen prior to turning
off power may not properly load
• If t\fere is no disc or t\fe corresponding
device is not connected, t\fe mode oper -
ated prior to t\fe most recent mode will
operate
• If t\fe previous mode still cannot be prop-
erly played, t\fe mode operated prior to
t\fat will operate

Appendix I 10-5
Problem Possible Cause Countermeasure
T\fe image
color/tone
quality is low
• T\fe brig\ftness, satu -
ration, \fue, and con -
trast levels are not set
properly • Properly adjust t\fe brig\ft -
ness, saturation, \fue, and
contrast levels t\froug\f
Display Setup
Sound does
not work
• T\fe volume level is
set to t\fe lowest level
•T\fe connection is not
proper
•T\fe device is cur -
rently fast-forwarding,
rewinding, scanning,
or playing in slow
mode
• Adjust t\fe volume level
•C\feck to see t\fat t\fe
device \fas been properly
connected
•T\fe sound will not work
w\fen t\fe device is fast-for-
warding, rewinding, scan -
ning, or playing in slow
mode
T\fe sound or
image quality
is low
• Vibration is occurring
from w\fere t\fe con -
version switc\f \fas
been installed
• Image color/tone
quality is low
•T\fe sound may be
s\fort-circuited and t\fe
image distorted if t\fe
device vibrates
•T\fe device will return to
normal once vibrations
stop
Problem Possible Cause Countermeasure
T\fe power
does not turn
on T\fe fuse is discon
-
nected
• Replace wit\f a suit\sable fuse
•If t\fe fuse is disconnected
again, please contact
your point of purc\fase or
Hyundai dealer
Device is not properly
connected
• C\feck to see t\fat t\fe de\svice
\fas been properly con -
nected
T\fe system
does not play T\fe ve\ficle battery is low
•
C\farge t\fe battery If t\fe
problem persists, contact
your point of purc\fase or
Hyundai dealer
10

10-6 I Appendix
Problem Possible Cause Countermeasure
T\fe USB
does not
work
• USB memory is
damaged
•USB memory \fas
been contaminated
•A separately pur -
c\fased USB HUB is
being used
• A USB extension
cable is being used
•A USB w\fic\f is not
a Metal Cover Type
USB Memory is
being used
•An HDD type, CF,
SD Memory is being
used
•T\fere are no music
files w\fic\f can be
played
•Please use t\fe USB after
formatting it.
•Remove any foreign sub -
stances on t\fe contact sur -
face of t\fe USB memory and
multimedia terminal
• Directly connect t\fe USB
memory wit\f t\fe multimedia
terminal on t\fe ve\ficle
• Directly connect t\fe USB
memory wit\f t\fe multimedia
terminal on t\fe ve\ficle
•Use standard USB Me\smory
•Use standard USB Me\smory
•Only MP3, WMA file formats
are supported. Please use
only t\fe supported music file
formats
T\fe iPod is
not recog-
nized even
t\foug\f it \fas
been con-
nected
• T\fere are no titles
w\fic\f can be played
•T\fe iPod firmware
version \fas not
been properly
updated
•T\fe iPod device
does not recognize
downloads
• Use iTunes to download and
save MP3 files into t\f\se iPod
•Use iTunes to update t\fe firm-
ware version and reconnect
t\fe iPod wit\f t\fe device
•Reset t\fe iPod and reconnect
wit\f t\fe device
Problem Possible Cause Countermeasure
Bluetoot\f
does not
work or its
limited func-
tions are
available
• Bluetoot\f on your
mobile p\fone is set
to OFF
•T\fe Bluetoot\f con -
nection is not made\s
• Android Auto is
active
•Set it to ON
•Make t\fe connection ac\stive
•Deactivate t\fe mode
Android Auto
does not
work wit\f
proper
connection
• Android Auto block -
ing is made in your
p\fone
• T\fe status of t\fe
application \fas an
error
•OS system version
not supported
•Android Auto App
not installed
•Android Auto is OFF
in connectivity set -
ting
• Non acceptance of
request of approval
•Release t\fe blocking.
•Clear t\fe error.
•End t\fe application process
and try again
•OS system of t\fe p\fone
s\fould be 5.x or more and
can be used by installing
t\froug\f Google play
•C\feck Android Auto is ON in
connectivity settin\sg.
SETUP ▶
Connectivity
(Select)
• Accept request of approval
Android Auto is connected
first time
i Information
• W\file operating t\fe device, if an abnormality occurs t\fat cannot be
corrected wit\f t\fe above described measures, press t\fe
RESET
key to
reset t\fe system.
• Press and \fold t\fe RESET key (over 1 second). T\fe device power will turn
off and t\fe system w\sill reset.