ISUZU TF SERIES 2004 Workshop Manual
Page 541 of 4264
CAB 10-33
Important Operations
15. Instrument Panel & Crass Beam Assembly
1) Tighten the 4 bolts fixing the cross beam and body panel
to the specified torque.
Torque N
m (kgf
m/lb
ft)
19 (1.9/14)
2) A Bolt: Steering Column to Cross Beam
Torque N
m (kgf
m/lb
ft)
20 (2.0/14)
B Bolt: Pedal Bracket to Cross Beam
Torque N
m (kgf
m/lb
ft)
15 (1.5/11)
3) C Bolt: Parking Brake Bracket to Cross Beam
Torque Nm (kgfm/lbft)
15 (1.5/11)
21. Steering Wheel/Steering Cowl
Tighten the steering wheel fixing nut to the specified
truque.
Torque N
m (kgf
m/lb
ft)
35 (3.6/26)
Page 542 of 4264
10-34 CAB
FLOOR CONSOLE
REMOVAL AND INSTALLATION
745R300001
A/T Model
Removal Steps
1. Rear floor console (Bucket seat model
only)
2. Front floor console
3. A/T switch
Installation Steps
3. A/T switch
2. Front floor console
1. Rear floor console (Bucket seat model only)
Page 543 of 4264
CAB 10-35
Important Operations - Removal
1. Rear Floor Console (Bucket Seat Model Only)
1) Open the rear console lid and remove 2 screws.
2) Pull out the front part of rear console at the 2 clip
positions.
2. Front Floor Console
1) Remove the 2 screws.
2) Pull out the rear part of front console at the 2 clip
positions and disconnect the switch connecter.
3) Remove the front console by pull out it rear ward.
Page 544 of 4264
10-36 CAB
REMOVAL AND INSTALLATION
745r300002
M/T Model
Removal Steps
1. Rear floor console (Bucket seat model
only)
2. Shift knob
3. Front floor console
Installation Steps
3. Front floor console
2. Shift knob
1. Rear floor console (Bucket seat model
only)
Page 545 of 4264
CAB 10-37
Important Operations - Removal
1. Rear Floor Console (Bucket Seat Model Only)
1) Open the rear console lid and remove 2 screws.
2) Pull out the front part of rear console at the 2 clip
positions.
3. Front Floor Console
1) Remove the 2 screws.
2) Pull out the rear part of front console at the 2 clip
positions.
3) Remove the front console by pull out it rear ward.
Page 546 of 4264
10-38 CAB
CONSOLE BOX (WITHOUT FLOOR CONSOLE)
REMOVAL AND INSTALLATION
RTW4A0MF000201
M/T Model
Removal Steps
1. Screw
2. Console box
Installation Steps
2. Console box
1. Screw
Page 547 of 4264
CAB 10-39
HEADLINING
REMOVAL AND INSTALLATION
This illustration is based on RHD model
EXTEND CAB Model
Removal Steps
1. Interior trim panels
2. Sunvisor/Sunvisor holder
3. Spot light
4. Assist grip
5. Hole cover
6. Coat hook
7. Dome light
8. Headlining
Installation Steps
8. Headlining
7. Dome light
6. Coat hook
5. Hole cover
4. Assist grip
3. Spot light
2. Sunvisor/Sunvisor holder
1. Interior trim panels
Page 548 of 4264
10-40 CAB
REMOVAL AND INSTALLATION
This illustration is based on RHD model
RTW3A0LF001101
REGULAR CAB Model
Removal Steps
1. Interior trim panels
2. Sunvisor/Sunvisor holder
4. Assist grip
5. Hole cover
7. Dome light
8. Headlining
Installation Steps
8. Headlining
7. Dome light
5. Hole cover
4. Assist grip
2. Sunvisor/Sunvisor holder
1. Interior trim panels
Page 549 of 4264
CAB 10-41
REMOVAL AND INSTALLATION
This illustration is based on RHD model
RTW3A0LF001001
CREW CAB Model
Removal Steps
1. Interior trim panels
2. Sunvisor/Sunvisor holder
3. Spot light
4. Assist grip
5. Hole cover
6. Coat hook
7. Dome light
8. Headlining
Installation Steps
8. Headlining
7. Dome light
6. Coat hook
5. Hole cover
4. Assist grip
3. Spot light
2. Sunvisor/Sunvisor holder
1. Interior trim panels
Page 550 of 4264
10-42 CAB
Important Operations - Removal
1. Interior Trim Panels
Refer to Interior Trim Panels in this section.
2. Sunvisor/Sunvisor Holder
1) Remove the 2 screws fixing the sunvisor.
2) Remove the screw fixing the sunvisor holder.
3. Spot Light
Pull out the spot light and disconnect the connector.
4. Assist Grip
Remove the 2 fixing screw.
6. Coat Hook
Open the cover and remove the fixing screw.
7. Dome Light
1) Remove the dome light lens and the fixing screws.
2) Disconnect the dome light connector.