KIA CARNIVAL 2007 Workshop Manual

Page 1131 of 1575

SEAT CUSHION COVER REPLACEMENT
1.Remove the seat assembly.
2. Remove the recliner cover.
3. Loosen the mounting bolts, then remove the seat back assembly (A).
4.Loosen the mounting bolts, then remove the seat cushion (A).
5.Remove the recliner cable (A).

Page 1132 of 1575

6.Loosen the mounting screw (A), then disconnect the scuff band (B).
7.Disconnect the protector (A) from the cushion frame, then remove the hog- ring clips (B).
8.Remove the frame (A).

Page 1133 of 1575

9.After removing the hog- ring clips (A) on the front of seat back remove the back cover (B).
10. Installation is the reverse of removal.
a. To prevent wrinkles, make sure the material is stretched evenly over the cover (A) before securing the hogring
clips (B).
b. Replace the hogring clips with new ones using special tool (C).
THIRD SEAT
SEAT ASSEMBLY REPLACEMENT
1.Remove the cover (A).
2.Loosen the mounting bolt.

Page 1134 of 1575

3.Remove the seat assembly (A).
4.Installation is the reverse of removal.
RECLINER COVER REPLACEMENT
1.Remove the recliner cover (A).

Page 1135 of 1575

2.Installation is the reverse of removal.
SEAT BACK COVER REPLACEMENT
1.Remove the recliner cable (A).
2.Loosen the mounting bolts, then remove the seat back assembly (A).
3.Remove the back panel (A).

Page 1136 of 1575

4.Remove the hogring clips (A).
5.Remove the headrest guide (A).
6.Remove the frame (A).

Page 1137 of 1575

7.After removing the hog- ring clips (A) on the front of seat back remove the seat back cover (B).
8.Installation is the reverse of removal.
SEAT CUSHION COVER REPLACEMENT
1.Remove the seat assembly.
2. Remove the recliner cover.
3. Loosen the mounting bolts, then remove the seat back assembly (A).
4.Disconnect the protector (A) from the back frame.

Page 1138 of 1575

5.Disconnect the seat pad (B) from the back frame (A).
6.After removing the hog- ring clips (A) on the front of seat back remove the seat back cover (B).
7.Installation is the reverse of removal.
SEAT FRAME ASSEMBLY REPLACEMENT
1.Remove the cushion cover(A).

Page 1139 of 1575

2.Installation is the reverse of removal.
SEAT BACK FRAM REPLACEMENT
1.Remove seat back cover(A).
2.Installation is the reverse of removal.

Page 1140 of 1575

Seat Belt

Page:   < prev 1-10 ... 1091-1100 1101-1110 1111-1120 1121-1130 1131-1140 1141-1150 1151-1160 1161-1170 1171-1180 ... 1580 next >