display Lexus ES300h 2014 Navigation Manual

177
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
XFor PBAP incompatible but OPP com-
patible Bluetooth® phones
1Select “Transfer Contacts” .
2Select “Replace Contacts” or “A d d
Contacts” .
zIf the phonebook contains phonebook
data, this screen is displayed.
3Transfer the phonebook data to the sys-
tem using a Bluetooth
® phone.
zDepending on the type of cellular phone,
OBEX authentication may be required
when transferring phonebook data. Enter
“1234” into the Bluetooth
® phone.
z This screen appears while transferring. To
cancel this function, select “Cancel”. If
“Add Contacts” is selected and there is an
interruption during the transfer of data, the
phonebook data transferred until then will
be stored in the system. This is not the case
when “Cancel” is selected.
4When the transfer is complete, “Done”
will appear on the screen. Select
“Done”.
X When another Bluetooth
® device is con-
nected
z When another Bluetooth® device is cur-
rently connected, this screen is displayed.
z To disconnect it, select “Yes” .
INFORMATION
●
Depending on the type of Bluetooth®
phone, the registered image on the
phonebook may not appear when
phonebook data is transferred.

178
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
XFrom “Contacts” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select “Transfer” .
4This screen is displayed. The following
operations are performed in the same
manner as when they are performed
from the “Setup” screen.
■REGISTERING THE PHONE-
BOOK DATA
1Select “New Contact” .
2Use the software keyboard to input the
name and select “OK” .
3Input the phone number and select
“OK”.
zTo use a tone signal after the phone num-
ber, input the tone signal too.
Phonebooks of PBAP incompatible but
OPP compatible phones can also be
transferred from the “Contacts” screen.
The phonebook data can be registered.
Up to 3 numbers per person can be reg-
istered. New phonebook data cannot be
added for PBAP compatible
Bluetooth
® phones.

180
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■THE “Edit Contact” SCREEN CAN
ALSO BE DISPLAYED
X From the “Contact” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select the desired da ta from the list on
the “Contacts” screen.
4Select “Options” .
5Select “Edit”. X
From the “Call History” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Call History” on the “Phone”
screen.
3Select the desired number from the list
on the “Call History” screen.
4Select “Add to Contacts” or “Update
Contact” .
5If “Update Contact” has been selected,
this screen will be displayed. Select the
desired data from the list.

181
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
■DELETING THE PHONEBOOK
DATA
1Select “Delete Contacts” .
2Select the desired data or “Select All”,
then select “Delete”.
zMultiple data can be selected and deleted
at the same time.
3Select “Yes”.
■ALTERNATIVE PHONEBOOK
DATA DELETION METHOD
X PBAP incompatible but OPP compatible
models
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select the desired da ta from the list on
the “Contacts” screen.
4Select “Options” .
5Select “Delete”.
6Select “Yes”.
The data can be deleted.
When selling or disposing of the vehicle,
delete all your data on the system.
For PBAP compatible phones, delete
the phonebook data after setting “A u t o -
matically Download Contacts” to
“Off” . (See “PBAP compatible models
automatic data transfer setting” on page
176.)
INFORMATION
●
When a Bluetooth® phone is deleted, the
phonebook data will be deleted at the
same time.

182
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select “Setup”.
2Select “Phone” on the “Setup” screen.
3Select “Phonebook” on the “Phone Set-
tings” screen.
4Select “Manage Speed Dials” .
5Perform each setting according to the
procedures outlined on the following
pages.
■THE “Speed Dials” SCREEN CAN
ALSO BE DISPLAYED
X From the “Speed Dial” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Speed Dials” on the “Phone”
screen.
3Select “Options” .
X From the “Contacts” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select “Options” .
SPEED DIALS SETTING
Speed dials can be registered and delet-
ed.

183
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
4Select “Manage Speed Dials” .
■REGISTERING THE SPEED DIAL
1Select “New”.
2Select the desired data to be registered.
3Select the desired phone number.
4Select the desired speed dial location.
5If a location that is already in use is se-
lected, this screen will be displayed.
zSelect “Yes” to replace it.
6When this screen is displayed, the oper-
ation is complete.
Speed dial numbers can be registered
by selecting the desired number from
the phonebook. Up to 18 numbers per
phone can be registered as a speed dial.

184
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■THE SPEED DIAL CAN ALSO BE
REGISTERED
X From the “Speed Dial” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Speed Dials” on the “Phone”
screen.
3Select “(add new)” .
4Select “Yes” to set new speed dial.
5Select the desired data to be registered.
6Select the desired phone number.
X From the “Contact” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select the desired data from the list on
the “Contacts” screen.
4Select “Options” .
5Select “Set Speed Dial” .

185
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
6This screen is displayed.
zThe following operatio ns are performed in
the same manner as when they are per-
formed from the “Setup” screen.
■ DELETING THE SPEED DIAL
1Select “Delete” .
2Select the desired data , or to delete all
the data select “Select All”, then select
“Delete” .
zMultiple data can be selected and deleted
at the same time.
3Select “Yes”.
1Press the “MENU” button on the
Remote Touch, then select “Setup”.
2Select “Phone” on the “Setup” screen.
3Select “Phonebook” on the “Phone Set-
tings” screen.
4Select “Delete Call History” .
5Select the desired history to be deleted.
The speed dial can be deleted.
DELETING CALL HISTORY
The call history can be deleted.
For PBAP compatible phones, delete
the call history after setting “A u t o m a t i -
cally Download Call History” to “Off” .
(See “PBAP compatible models auto-
matic data transfer setting” on page
176.)

186
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Select the desired data, or to delete all
the data select “Select All”, then select
“Delete”.
z Multiple data can be selected and deleted
at the same time.
7Select “Yes”.
■THE CALL HISTORY CAN ALSO
BE DELETED
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Call History” on the “Phone”
screen.
3Select “Delete”.
4This screen is displayed.
zThe following operations are performed in
the same manner as when they are per-
formed from the “Setup” screen.
z Other call history can be operated simi-
larly.
X Deleting after call hi story has been dis-
played
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Call History” on the “Phone”
screen.
3Select the desired hi story to be deleted.

187
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
4Select “Delete” .
5Select “Yes”.
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Setup” on the “Menu” screen.
3Select “Phone” on the “Setup” screen.
4Select “Messaging Settings” .
5Perform each setting according to the
procedures outlined on the following
pages.
6Select “Save” when each setting is com-
pleted.
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Messages” on the “Phone”
screen.
3Select “Options” .
MESSAGE SETTINGS
Message settings can be changed.THE “Messaging Settings”
SCREEN CAN ALSO BE
DISPLAYED