navigation system Lexus ES300h 2014 Navigation Manual

162
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the talk switch.
z“Call <name> <type>” is displayed in the
“Shortcut Menu” screen.
z When “Call <name> <type>” on the “Short-
cut Menu” screen is dimmed, the phone-
book’s voice command recognition cannot
be used. Check the Bluetooth
® connec-
tion and if the contacts have been trans-
ferred to the navigation system.
2Say the name, or the name and type of
phone, of a registered contact.
z In the same manner as it is displayed on the
screen, “Call <name> <type>”, after saying
“Call” say the name, or the name and type
of phone, of a contact.
For example: “Call” , “John Smith” or “Call” ,
“Mary Davis” , “Mobile”
z There are 4 types of phones: Home,
Mobile, Office and Other.
z Short or abbreviated names in the phone-
book may not be recognized. Change
names in the phonebook to full names.
z Sometimes a voice recognition result con-
firmation screen will be displayed. After
confirming the result, say “Yes” or “No” .
z When the system recognizes multiple
names from the phoneb ook, a name candi-
date list will be displayed on the screen. If
the desired name is not displayed on the
top of the screen, say the number of the
name from the candidate list (number 1 and
number 2) to select a name from the candi-
date list. z
When a contact has multiple phone num-
bers registered in the phonebook, a candi-
date list will be displa yed. If the desired
phone number is not displayed on the top
of the screen, say the number of the desired
phone number from the candidate list
(number 1 and number 2) to select a phone
number from the candidate list.
3Say “Dial” to call the phone number.
1Press the talk switch.
z“Dial <number>” is displayed in the “Short-
cut Menu” screen.
z When “Dial <number>” on the “Shortcut
Menu” screen is dimmed, the phone num-
ber voice recognitio n cannot be used.
Check the Bluetooth
® phone connection.
2Say the phone number.
z In the same manner as it is displayed on the
screen, “Dial <numbe r>”, after saying “Dial”
say the phone number.
z Say the phone number one digit at a time.
For example, if the phone number is
2345678:
Say “two three four five six seven eight”
Do not say “twenty three forty five sixty
seven eight”
VOICE COMMAND
EXAMPLE: CALL NAME
VOICE COMMAND
EXAMPLE: DIAL NUMBER

164
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select “Messages”.
zWhen “Message Transfer” is set to “Off”, a
confirmation screen will be displayed.
Select “Yes”. (See page 187.)
2Select the “SMS/MMS” tab and then
select the desired received message
from the list.
z The tab display may vary depending on the
type of cellular phone.
3Select or press the switch on
the steering wheel.
CALLING USING AN SMS/
MMS MESSAGE
Calls can be made to an SMS (Short
Message Service)/MMS (Multimedia
Messaging Service) message sender’s
phone number.
This can be operated while driving.
BY POI CALL
A call can be made by selecting
when it is displayed on the screen from
the navigation system. (See “TO SEE
INFORMATION ABOUT THE ICON
WHERE THE CURSOR IS SET” on
page 42 and “VIEW DETAILED FUEL
PRICE INFORMATION” on page
335.)

168
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select or press the switch
on the steering wheel to start talking
with the other party.
INCOMING CALL WAITING
When a call is interrupted by a third par-
ty while talking, this screen is displayed.
zSelect or press the switch
on the steering wheel to refuse the call.
zEach time is selected or the
switch on the steering wheel is pressed
during an interrupted call, the party who
is on hold will be switched.
INFORMATION
●
If your cellular phone does not support
HFP Ver. 1.5, this function cannot be used.
●The ring tone that has been set in the
“Phone Sound Settings” screen sounds
when there is an incoming call. Depend-
ing on the type of Bluetooth
® phone,
both the navigation system and
Bluetooth
® phone may sound simulta-
neously when there is an incoming call.
(See “RING TONE SETTING” on page
173.)

169
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
7. Bluetooth® PHONE MESSAGE FUNCTION
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Phone” on the “Menu” screen.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
3Select “Messages” .
zDepending on the type of Bluetooth®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
z When “Message Transfer” is set to “Off ”, a
confirmation screen will be displayed.
Select “Yes”. (See page 187.)
4Select the screen button corresponding
to the desired message.
zMessages are displayed in the appropriate
connected Bluetooth® phone’s registered
mail address folder. Select the tab of the
desired folder to be displayed.
5Messages can be checked.
z Selecting “Previous” or “Next” displays the
previous or next message.
z Only received messages on the connected
Bluetooth
® phone can be displayed.
z The text of the message is not displayed
while driving.
Received messages can be forwarded
from the connected Bluetooth
® phone,
enabling checking and replying using
the navigation system (Quick reply).
CHECKING MESSAGES

179
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
4Select the phone type.
5When 2 or less numbers in total are reg-
istered to this contact, this screen is dis-
played.
z To add a number to this contact, select
“Yes” .
■EDITING THE PHONEBOOK
DATA
1Select “Edit Contacts” .
2Select the desired data to edit.
3Select the desired name or number.
4Edit the name or the number. (See
“REGISTERING THE PHONEBOOK
DATA” on page 178.)
5Select “Save” when editing is complet-
ed.
The phone number can be registered in
“Phone # 1” , “Phone # 2” and “Phone #
3” separately. Phonebooks cannot be
edited for PBAP compatible
Bluetooth
® phones via the navigation
system.

195
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
1Select “A d d N e w ” to register a
Bluetooth
® device to the system.
z If 5 Bluetooth® devices have already been
registered, a registered device needs to be
deleted. See “When 5 Bluetooth
® devices
have already been registered” on page
196.
2When this screen is displayed, operate
the Bluetooth
® device.
z Search for the navigation system displayed
on the system’s screen using your
Bluetooth
® device, and register the
Bluetooth® device.
For details about operating the Bluetooth®
device, see the manual that comes with it.
z A passcode is not required for SSP (Secure
Simple Pairing) compatible Bluetooth
®
devices. Depending on the type of
Bluetooth® phone being connected, a
message confirming registration may be
displayed on the Bluetooth
® phone’s
screen. Respond and operate the
Bluetooth
® phone according to the confir-
mation message.
z To cancel the registration, select “Cancel”.
3When the connection is completed, this
screen is displayed.
zWhen using the same device, it is not nec-
essary to register it again.
REGISTERING A Bluetooth®
DEVICE
Bluetooth
® devices compatible with
phones (HFP) and portable players
(AVP) can be registered simultaneous-
ly. Phones (HFP) and portable players
(AVP) (maximum of 5) can be regis-
tered.

232
1. AUDIO/VIDEO SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6. RADIO OPERATION (INTERNET RADIO BROADCAST)
1Press the “RADIO” button.
2Select the “Apps” tab or press the “RA-
DIO” button repeatedly until the “Apps”
tab is selected.
z For the Remote Touch operation method,
see “SWITCHING BETWEEN FUNC-
TIONS” on page 211.
z If a compatible phone is already registered,
it will be connected automatically. z
If a compatible phone has not been regis-
tered or the Bluetooth
® connection cannot
be completed correctly, select “Connect”
to register and/or connect your phone.
(See page 194.)
z When connection is complete, the applica-
tion screen can be displayed.
3Select “View Application Screen” .
zThe internet radio application screen is dis-
played.
z Perform operations according to the dis-
played application screen.
z By pressing the “RADIO” button, the
“Audio” screen can be returned to.
*: For details, refer to http://
www.lexus.com/enform/ or call 1-800-
255-3987.
LISTENING TO INTERNET
RADIO
One of Apps’s features is the ability to
listen to internet radio. In order to use
this service, an Apps compatible phone
and the navigation system needs to be
set. For details, refer to the “APPS” sec-
tion. (See page 358.)
INFORMATION
●
Other applications can be activated
while listening to internet radio.
●An iPhone cannot be connected via
Bluetooth® and USB connection at the
same time. However, it is possible to
recharge an iPhone while using Apps by
connecting via USB. The system uses the
connection method that was used last.
Therefore, if connected via USB after
Bluetooth
® connection, it is necessary to
reconnect the iPho ne via Bluetooth®.
●Services requiring a separate contract
can also be used.*
●Some parts of “Apps” can be adjusted
using the switches on the steering wheel.
●If internet radio has never been listened
to by activating “Apps” from the “Informa-
tion” screen, the “Apps” tab will be
dimmed.

268
1. AUDIO/VIDEO SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zThe portable player will be automatically
connected under the fo llowing conditions:
•The “START STOP ENGINE” <“POWER”> switch is in either ACCES-
SORY or IGNITION ON <ON> mode.
•When “Bluetooth* Power” is switched
from off to on.
• When the portable player is discon- nected for some reason.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
1Select “Connect” .
2Select the desired portable player.
3When the connection is completed, this
screen is displayed. It is now possible to
use the portable player.
CONNECTING A Bluetooth®
AUDIO PLAYER
To use the Bluetooth® audio system, it is
necessary to register a portable player
with the system. Once the portable play-
er has been registered , it is possible to
listen to the music.
Once the portable player has been reg-
istered, it is possible to listen to music
through the navigation system. (See
“REGISTERING A Bluetooth
® DE-
VICE” on page 195.)
INFORMATION
●
For operating the portable player, see the
instruction manual that comes with it.
WHEN “Bluetooth* Power” IS
ON
WHEN “Bluetooth* Power” IS
OFF
Manually connect the portable player in
accordance with the following proce-
dure.

308
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1. VOICE COMMAND SYSTEM OPERATION
1. VOICE COMMAND SYSTEM
Talk switch
zPress the talk switch to start the voice com-
mand system.
z To cancel voice recognition, press and hold
the talk switch.
Back switch
zPress the back switch to return to the previ-
ous screen.
1Press the talk switch.
zAfter the “Shortcut Menu” screen has been
displayed, voice guidance will commence.
2After a beep sounds, say the command
of your choice.
zVoice commands are marked with .
Some commonly used commands are dis-
played on the screen.
z By saying “Next page” or “Previous page” ,
or by selecting “ N e x t Pg .” / “ Pr e v. Pg .” , the
screen will display the commands dis-
played on the page in the background.
z Saying “Main menu” or selecting “Main
Menu” when the “Shortcut Menu” screen
is displayed will display the “Main Menu”
screen.
z Registered POIs, registered names in the
phonebook etc., can be said in the place of
the “<>” next to the commands. (See page
317.)
For example: Say “Find nearby dining” ,
“Call John” etc.
The voice command system enables the
navigation, audio/video, hands-free and
air conditioning systems to be operated
using voice commands.
The operating procedures of voice
commands from the “Shortcut Menu”
screen are explained here.
INFORMATION
●
Commands that are not displayed in the
“Shortcut Menu” screen can be operated
from the “Main Menu” screen.
STEERING SWITCHES FOR
THE VOICE COMMAND
SYSTEM
VOICE COMMAND SYSTEM
OPERATION
z Voice guidance for the voice command
system can be skipped by pressing the
talk switch.

309
1. VOICE COMMAND SYSTEM OPERATION
7
VOICE COMMAND SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3Say the command displayed on the
screen.
zIf a desired outcome is not shown, or if no
selections are available, perform one of the
following to return to the previous screen:
•Say “Go back” .
•Select “Go Back” .
• Press the back switch on the steering wheel.
z To cancel voice recognition, select “Can-
cel” , or press and hold the talk switch.
zSaying “Help” prompts voice guidance to
offer examples of commands and opera-
tion methods.INFORMATION
●
If the navigation system does not respond
or the confirmation screen does not dis-
appear, press the talk switch and try
again.
●If a voice command cannot be recog-
nized within 6 seconds, voice guidance
will say “Pardon?” (“Command not rec-
ognized.” will be displayed on the screen)
and voice command reception will
restart.
●If a voice command cannot be recog-
nized 2 consecutive times, the voice
command guidance system will say
“Paused. To restart voice recognition,
push the talk switch. To cancel voice rec-
ognition, push and hold the talk switch.”
Then voice recognition will be sus-
pended.
●The voice recognition prompt can be set
to on or off when “Voice Prompts” is
selected. This setting can also be
changed on the “Voice Settings” screen.
(See page 62.)
●When “Voice Prompts” is selected, voice
recognition will be temporarily sus-
pended. Press the talk switch again.
●Voice guidance can be canceled by set-
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk switch
and hearing a beep.