MITSUBISHI ENDEAVOR 2010 1.G MMCS Manual

View Route 5-2
Preview Route
The map can be scrolled along the
route. The type of route taken to the
destination can be viewed.
1 Touch [Preview] in the view
route screen
(5-1)
The preview screen is displayed. 2 Touch [Backward], [Stop] or
[Forward]
eng_062
NOTE Touch [Backward] to scroll towards the starting
position.
 Touch [Stop] to stop the scrolling.
 Touch [Forward] to scroll towards the
destination.
Remaining Route
Displaying a map of the entire
remaining route, in a scale where it
can all be displayed.
1 Touch [Remaining] in the view
route screen
(5-1)

eng_063
Displays a map of the entire remaining route, in a
scale where it can all be displayed.
Route Outline
A list of the intersections up to the
destination where turns are required is
displayed.
1 Touch [Rt. Outline] in the view
route screen
(5-1)

eng_064
A list of the intersections where turns are required
is displayed.NOTE Touch an inter-section on the list
to display a map of its vicinity.
eng_065

Detour 5-3
Routes
Detour
Detours that specify the distance from the
current location, or detours that specify
streets to avoid can be set.
1 Touch [Route] on the current
location screen
eng_181
The route menu is displayed. 2 Touch [Detour]
eng_070

eng_066
The detour setting screen is displayed.
Detour Distance
Specifying the distance to calculate
the detour route.
1 Touch the desired detour
distance for “Detour Distance” in
the detour setting screen
(5-3)

eng_067
A detour route is calculated according to the
speci ed distance, and route guidance starts.NOTE The distance unit in the factory settings is
“miles”. If the unit is changed to “km” (
“System
Options” (7-1)
), the detour distances are [1], [5],
[10], [20], [40], [80].
Avoid Street
Settings are performed here for
selecting a start street and an end
street, and detouring the area in
between.
1 Touch [Street List] in the detour
setting screen
(5-3)
A list of streets to be passed on the current route
is displayed. 2 Touch the start street
eng_068
NOTE If the route to be calculated detours only one
street, go to step 4.
Continued on the Next Page

Detour 5-4 3 Touch the end street
eng_069
4 Touch [Done]
A detour route is calculated according to the
speci ed street area, and route guidance starts.

Editing the Route (Itinerary) 5-5
Routes
Editing the Route (Itinerary)The destination position can be changed,
a way point can be added, and the route
calculation conditions can be changed.
1 Touch [Route] on the current
location screen
eng_181
The route menu is displayed.
2 Touch [Itinerary]
eng_070

eng_071
The itinerary list screen is displayed.NOTE Touch [Info] to display a map of the vicinity and
corresponding information.
 Touch [Start] to calculate the route with the
current settings and start route guidance.
Showing the Route (3 Routes)
The entire route can be displayed, 3
different routes can be viewed, and
the calculation conditions can be
changed.
1 Touch [Show Route] in the
itinerary list screen
(5-5)
Location Information Button
Route Option Icon
eng_072
The show route screen is displayed.NOTE Touch [
] of the location information button
or [1], [2]..., to display the map of the vicinity of
the destination and way point.
 The route option icon can be used to view with
icons the information set in
“Route Options”
(7-6)
. Refer to
“Route Option Icon” (5-1)
for the
meanings of the icons.
 Touch [Option] to perform settings related to the
route in the same way as from
“Route Options”
(7-6)
.
Continued on the Next Page

Editing the Route (Itinerary) 5-6NOTE Touch [Rt. Outline] to display a list of the
intersections up to the destination where turns
are required.
>>> “Route Outline” (5-2)
 Touch [Preview] to scroll the map along the
route.
>>> “Preview Route” (5-2)
 Touch [Modify] to return to the itinerary list
screen. 2 Touch [3 Routes]
3 routes are displayed: [Fast], [Short] and [Easy]. 3 Touch [Fast], [Short] or [Easy]
eng_073
4 Touch [Done]
eng_074
5 Touch [Start]
eng_075
Guidance starts for the changed route.
Re-ordering
The sequence for visiting each location
can be changed.
1 Touch [Re-order] in the
itinerary list screen
(5-5)
The re-order screen is displayed. 2 Touch the locations in the
desired sequence
eng_076
The visiting sequence is displayed on the left of
each location button.
3 Touch [Done]
eng_077
NOTE Touch [Clear] to change the visit sequence
again. 4 Touch [Start]
eng_078
Guidance starts for the changed route.

Editing the Route (Itinerary) 5-7
Routes
Adding a Way Point
A way point can be added to the
current route.
1 Touch [Add] in the itinerary list
screen
(5-5)
The destination search screen is displayed. 2
Touch one of the search methods
to search for the location
eng_079
Refer to the following pages to search for the
location.>>> [Address/Intersection] (4-3)
>>> [Point of Interest (POI) Name] (4-6)
>>> [Advanced] (4-8)
>>> [Previous 20] (4-7)
>>> [Address Book] (4-2)
3 Touch [Itinerary List]
eng_080
4
Touch [Add] in the sequence
position in which it is to be visited
eng_081
The searched location is added to the route as a
way point. 5 Touch [Start]
eng_082
Guidance starts for the changed route.
Deleting
A destination or way point can be
deleted.
1 Touch [Delete] in the itinerary
list screen
(5-5)
The delete itinerary screen is displayed. 2 Touch the location to delete
eng_083
NOTE The locations targeted for deletion are displayed
with a black highlight. Touch a location again to
remove it from the deletion target.
 Multiple locations can be selected at the same
time.
 Touch [All] to delete all locations at the same
time.
Continued on the Next Page

Editing the Route (Itinerary) 5-8 3 Touch [Done]
eng_084
4 Touch [Yes]
eng_085
5 Touch [Start]
eng_086
Guidance starts for the changed route.
Option
Settings related to the route can be
performed.
1 Touch [Option] in the itinerary
list screen
(5-5)

eng_087
The route options screen is displayed.
The remaining operations are the same as from
step 3 of
“Route Options” (7-6)
.

Deleting the Route 5-9
Routes
Deleting the Route
Deleting a created route.
1 Touch [Route] on the current
location screen
eng_037
The route menu is displayed. 2 Touch [Delete Route]
eng_070
3 Touch [Yes]
eng_088

The route is deleted.

Deleting the Route 5-10

Storing a New Location 6-1
Address Book
Address Book
Storing a New Location
If frequently visited locations are stored in
advance in the address book, the route to
the stored location can be calculated.
From the Navi Menu
Storing a location from the Navi Menu.
1 Search for the location
>>> “Destination” (4-1) 2 Touch [Address Book]
eng_089
The information screen for the location to be
stored is displayed.
3 Touch [Done]
eng_090
The displayed location is stored in the address
book.NOTE Touch “Icon” or “Name” to edit the information
about the stored location. When editing an
icon or name, perform in the same way as from “Editing a Location” (6-4)
.
From the Scroll Menu
Storing a location from the scroll menu.
1 Scroll the map and place the
cursor on the location to be stored
2 Touch [Address Book]
eng_091
The information screen for the location to be
stored is displayed.NOTE If there are several
POIs in the scroll,
a list is displayed,
and the POIs to
be registered
can be selected.
eng_184