light NISSAN PATHFINDER 2012 R52 / 4.G 06IT Navigation Manual

INFO:
The location is stored in the first available
position number in the Address Book list.
Voice command
1. Push <TALK> located on the steering
switch.
2. After the tone sounds, speak a command.
To store a current location:
“Store Location” (Alternate command mode)
STORING A LOCATION BY MOVING
THE MAP
1. Move to the preferred location on the map and push <ENTER> .
2. Highlight [Store Location] and push
<ENTER> . A message is displayed, and
the location is stored in the Address Book.
3. Push <MAP>to return to the current
location map screen. The icon representing
the stored location is displayed on the map.
INFO:
The location is stored in the first available
position number in the Address Book list. A calculated route can be stored.
A maximum of 5 routes can be stored.
Stored routes can be easily retrieved and set as
the suggested route.
INFO:
Stored route includes only locations (destination
and waypoints) and route calculation conditions,
not the route itself.
1. Push <ROUTE> .
2. Highlight [Route Information] and push
<ENTER> .
STORING A ROUTE
6-4Storing a location/route

3. Highlight [Store Route] and push<ENTER> .
4. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
The current route is stored.
OTHER SETTINGS
You can also store a route using the following
procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>.
3) Highlight [Address Book] and push <ENTER> .
4) Highlight [Stored Routes] and push <ENTER> .
5) Highlight [None (Add New)] and push <ENTER> .
6) A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>.
The current route is stored.
INFO:
. The route is stored in the first available
position number in the store current route
list.
. A maximum of 5 routes can be stored. When
5 routes are stored in the Address Book, a
new route cannot be stored until a route is
deleted.
“DELETING A STORED ITEM” (page
6-20)
. If you have not set any waypoints on the
route, the route cannot be stored.
Storing a location/route6-5

You can store the route you have traveled up to
the current location. A maximum of 5 tracked
routes can be stored.
1. Push<MAP>to display the current loca-
tion map screen.
2. Push <ENTER> at the current vehicle
location.
3. Highlight [Store Tracking] and push <ENTER> .
4. A confirmation message is displayed.
Confirm the contents of the message, high-
light [Yes] and push <ENTER>.
The tracked route you have traveled is
stored.
5. Push <MAP>or<BACK> to return to the
current location map screen.
INFO:
. A maximum of 5 tracked routes can be
stored. When 5 tracked routes are stored in
the Address Book, a new tracked route
cannot be stored until a tracked route is
deleted.
“DELETING A STORED ITEM” (page
6-20)
. The tracked route is stored in the first
available position number in the store
tracking list.
OTHER SETTINGS
You can also store a tracked route using the
following procedure.
1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <ENTER> .
4. Highlight [Stored Tracking] and push <ENTER> .
5. Highlight [None (Add New)] and push <ENTER> .
INFO:
You can store the tracked route on the setting
screen only when [Current Tracking] is set to on.
STORING A TRACKED ROUTE
6-6Storing a location/route

An Avoid Area can be stored.
The Avoid Area is an area that you want to
exclude from a route, such as a road that is
always congested. Once you store Avoid Areas,
the system avoids those areas when calculating
a route. Up to 10 Avoid Areas can be stored.
1. Push<SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Avoid Area Settings] and push
<ENTER> .
INFO:
You can also access and store an Avoid
Area from the Address Book.
4. Highlight [None (Add New)] and push <ENTER> .
INFO:
A maximum of 10 Avoid Areas can be
stored.
“DELETING A STORED ITEM” (page
6-20)
5. Highlight the appropriate method to search for a location and push <ENTER>.
“4. Setting a destination”
6. Set the following items for the searched
location.
STORING AN AVOID AREA
Storing a location/route6-7

Available setting items:
.Rename:
Changes the name.
“Rename” (page 6-18)
.Move Location:
Adjusts the location of the Avoid Area.
“Move Location” (page 6-18)
.Resize Area:
Adjusts the range of the Avoid Area.
“Resize Area” (page 6-19)
.FWY:
Avoids freeways.
“FWY” (page 6-19)
.Delete:
Deletes the avoid area.
“Delete” (page 6-19)
7. After finishing the setting, highlight [OK] and push <ENTER> .
OTHER SETTINGS
You can also store an avoid area using the
following procedure.
1. Push<SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <ENTER> .
4. Highlight [Avoid Area] and push <ENTER>.
5. Highlight [None (Add New)] and push <ENTER> . Items stored in the Address Book can be
modified. You can edit these settings to make
the navigation system more useful.BASIC OPERATION
1. Push
<SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <ENTER> .
4. Highlight the preferred item and push <ENTER> .
EDITING THE ADDRESS BOOK
6-8Storing a location/route

Available items
.Stored Location:
Edits the information of a stored home and
location.
“EDITING THE STORED HOME AND
LOCATION” (page 6-9)
. Stored Routes:
Edits the information of a stored route.
“EDITING THE STORED ROUTE”
(page 6-16)
. Stored Tracking:
Edits the information of a stored tracked
route.
“EDITING THE STORED TRACKING”
(page 6-16)
. Avoid Area:
Edits the information of a stored Avoid Area.
“EDITING THE AVOID AREA” (page
6-18)
. Delete Stored Items:
Deletes a stored location or route.
“DELETING ALL STORED ITEMS”
(page 6-21)
EDITING THE STORED HOME AND
LOCATION
1. Highlight [Stored Location] and push
<ENTER> .
2. Highlight the preferred stored home location or stored location and push <ENTER>.
INFO:
.Selecting [Sort List] displays a list of
various sort functions.
To use the sort functions, stored loca-
tions must be set in advance.
“MINOR ADJUSTMENT OF THE
HOME OR STORED LOCA-
TIONS” (page 6-10)
3. Highlight the preferred item and push
<ENTER> .
Available setting items
.Edit:
Edits the stored location information.
. Move Location:
Adjusts the location of the stored location.
. Delete:
Deletes the stored location.
. OK:
Applies the settings.
Storing a location/route6-9

MINOR ADJUSTMENT OF THE HOME
OR STORED LOCATIONS
When you select [Edit], you can edit the
following items of the home or stored location.. Show Icon on Map
. Name (only for stored locations)
. Icon
. Sound
. Direction
. Distance
. Phone No.
. Group (only for stored locations)
. Entry Number (only for stored locations)
Show Icon on Map
Displays the home icon or the stored location
icon on the map.
1. Highlight [Edit] and push <ENTER>.2. Highlight [Show Icon on Map] and push
<ENTER> .
3. The indicator illuminates when the item is set. Then the system displays the icon on
the map.
Name (only for stored locations)
Changes the name of a stored location.
1. Highlight [Edit] and push <ENTER>.
2. Highlight [Name] and push <ENTER>.
A character input screen is displayed.
3. Enter the preferred name for the stored
location.
“CHARACTER (letter and number)
INPUT SCREEN” (page 2-21)
4. Highlight [OK] and push <ENTER>.
The name is stored.
Icon
Changes the icon of the home or stored location
to the preferred one. By changing the icons, you
can utilize the [By Icon] option of the sort
function more effectively.
1. Highlight [Edit] and push <ENTER>.
2. Highlight [Icon] and push <ENTER>.
A list of icons is displayed.
6-10Storing a location/route

3. Highlight the preferred icon by scrolling thelist using the main directional buttons or the
center dial. Then push <ENTER>.
Storing a location/route6-11

Sound
Sets the tone of the arrival alarm that sounds
when the vehicle approaches the home or a
stored location.
1. Highlight [Edit] and push<ENTER>.
2. Highlight [Sound] and push <ENTER>.
A sound list is displayed.
3. Highlight the preferred alarm tone by scrol- ling the list using the main directional
buttons or the center dial. Then push <ENTER>
. The indicator of the selected
alarm tone illuminates.
Sound list:
None
Chime
Melody
Sound
Dog
Cat
Wave
Church bell
Music box 1
Music box 2
Marimba
Trumpet
Horn
Scratch
Direction
Sets the alarm to sound when approaching from
a specific direction.
1. Highlight [Edit] and push <ENTER>.
2. Highlight [Direction] and push <ENTER>.
The home or stored location is displayed at
the center of the map.
3. Set the direction that sounds the alarm using the center dial or the left or right
button of the main directional buttons. Then
push <ENTER> . The selected direction is
set.
Storing a location/route6-13

INFO:
. While setting the direction, you can change
the map scale.
. After the direction is set, if you highlight
[Direction] and push <ENTER>once again,
a confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>. The set direction
is cancelled.
Distance
Sets the alarm to sound when reaching a
specific distance to the home or stored location.
1. Highlight [Edit] and push <ENTER>.
2. Highlight [Distance] and push <ENTER>.
3. Highlight the preferred distance option and
push <ENTER> . The indicator of the
selected distance illuminates.
Available distance options: . 150 feet (50 m)
. 300 feet (100 m)
. 1000 feet (300 m)
. 1500 feet (500 m)
INFO:
Once you set the direction and distance to
sound an alarm, the system will sound the alarm
when the vehicle icon passes a half circle outline
on the map, as shown in the figure.
Example: Set to 300 feet (100 m) distance,
upward direction
&1Stored location icon
&2Vehicle icon
&3Setting range
Phone No.
Stores the telephone number of the home or a
stored location.
1. Highlight [Edit] and push <ENTER>.
2. Highlight [Phone No.] and push <ENTER>.
The telephone number entry screen is
6-14Storing a location/route