PEUGEOT 1007 2008 Owner's Guide

2
34
Display settings
Once the "Display settings" menu has
been selected, you can gain access
to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode. Languages
Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil, Deutsch, English, Espanol).
Units
Once the "Units" menu has been
selected, you can change the units
of the following parameters:
- temperature (°C or °F),
- fuel consumption (l/100, mpg or
km/l).
Once you have selected a setting,
press the "  " or "  " buttons to
change its value.
Press the "  " or "  " buttons to
move to the previous or next setting
respectively.
Press the "OK" button to record
the change and return to the normal
display or press the "ESC" button to
cancel. For safety reasons, it is im-
perative that confi guration of
the multifunction displays by
the driver takes place when
stationary.

2
35
MONOCHROME DISPLAY C (without RD4 audio equipment)
General menu
Press the "MENU" button to access
the general menu:
- trip computer (see corresponding section),
- personalisation-confi guration.
Turn the navigator to select the menu
required, then confi rm by pressing
the navigator.
Presentation
It displays the following information:
- the time,
- the date,
- the exterior temperature (this fl ashes if there is a risk of ice),
-
the accesses check (doors, boot, ...),
- the warning messages (e.g.: "Antipollution system faulty")
or information messages (e.g.:
"Automatic headlamp lighting
activated"), displayed tempora-
rily, can be cleared by pressing
the "ESC" button,
- the trip computer (see corre- sponding section), Parameter configuration
There are three buttons and a navi-
gator to enable you to control the
screen:
-
"MENU" to display the general
menu,
- "MODE" to change the perma-
nent application (trip computer,
date, ...),
- "ESC" to abandon the operation
in progress,
- Rotation of the navigator:
movement on the display or
changing of a setting,
- Press on the navigator: confi r-
mation of the selection. "Personalisation-
Configuration" menu
Once this menu has been selected, you
can access the following functions:
- defi ne the vehicle parameters,
- display confi guration,
- selection of the language.

2
36
Defi ne the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the fol-
lowing equipment:
- wiper linked with reverse gear,
- "follow-me-home" lighting and duration.
Example: "Duration of the "follow-me-
home" lighting" Display confi guration
Once this menu has been selected,
you can access the following settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
Once you have selected a setting,
press the navigator.
Turn the navigator to change its value.
Press the navigator to record the
change and move on to the next
setting or press the
"ESC" button to
cancel. Selection of the language
Once this menu has been selected,
you can change the language
used on the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
For safety reasons, it is im-
perative that confi guration of
the multifunction displays by
the driver takes place when
stationary.

2
37
MONOCHROME SCREEN C
"Audio functions" menu
With the RD4 audio equipment
switched on, once this menu has
been selected, you can activate
or deactivate the functions linked
with the use of the radio (RDS,
REG, RadioText), the CD or the CD
changer (introscan, random play, CD
repeat).
Presentation
This displays the following informa-
tion, via the RD4 audio equipment
control keypad:
- the time,
- the date,
- the outside temperature (this fl ashes if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Antipollution system faulty")
or information messages (e.g.:
"Automatic headlamp lighting
activated"), displayed temporar-
ily, can be cleared by pressing
the "ESC" button,
- the trip computer (see corre- sponding section). General menu
Press the
"MENU" button to gain
access to the general menu:
- audio functions,
- trip computer (see corresponding section),
- personalisation-confi guration,
- telephone (hands-free kit).
Press the "  " or "  " buttons to select
the menu required, then confi rm by
pressing the "OK" button.
"Personalisation-
Configuration" menu
Once this menu has been selected,
you can gain access to the following
functions:
- defi ne the vehicle parameters,
- display confi guration,
- selection of the language.

2
38
Defi ne the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the
following equipment:
- wiper linked with reverse gear,
- "follow-me-home lighting" and duration.
Example: "Duration of follow-me-
home lighting" Display confi guration
Once this menu has been selected,
you can gain access to the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
When you have selected a setting,
press the
"OK" button, then press
the "  " or "  " buttons to change its
value.
Press the "OK" button to record the
change and move on to the next
setting or press the "ESC" button to
cancel. Selection of the language
Once this menu has been selected,
you can change the language
used by the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
For safety reasons, it is im-
perative that confi guration of
the multifunction displays by
the driver takes place when
stationary.

2
39
COLOUR SCREEN
Displays on the screen
When the ignition is switched on, this
displays the following information
automatically and directly:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned
by a message).
Warning messages (e.g.: "Fuel level
low") and vehicle function status
messages (e.g.: "Automatic switching
on of the headlamps activated")
may appear temporarily. These can
be cleared by pressing the "ESC"
button. General menu
When the RT4 GPS audio/telephone
is switched on, select the menu
which corresponds to the following
applications:
- the satellite navigation system,
- the guidance on the map,
- the traffi c information,
- the audio sources (radio, CD,
Jukebox, ...),
- the telephone directories and functions,
- the confi guration of the screen and the setting of the parameters
of the vehicle’s equipment,
- the displaying of a video.
- the vehicle diagnostics (warnings log and status of the functions). Controls
From the RT4 GPS audio/telephone
control panel, to select one of the
applications:

 press the "MENU" button to gain
access to the general menu ,

 turn the dial to move the selection,

 press the dial to confi rm the
selection,
or

 press the "ESC" button to aban-
don the operation in progress and
return to the previous display.
For further details concerning these
applications, refer to the RT4 part of
the "Audio and Telematics" section.

2
40
Selection of the language
Once the "Selection of the language"
menu has been selected, you gain
access to the following parameters:
- selection of the display, infor-mation and voice commands
language (Français, English,
Italiano, Portugues, Espanol,
Deutsch, Nederlands).
Display confi guration
Once the "Display confi guration"
menu has been selected, you gain
access to the following parameters:
- selection of the palette of colours available for the display,
- setting of the brightness and bril- liance of the display,
- setting of the date and time (12 or 24 hour mode, adjustment
of the minutes on GPS),
- selection of the units (tempera- ture in °Celsius or °Fahrenheit;
consumption in l/100 km or mpg
or km/l).
Sounds
Once the "Sounds" menu has been
selected, you gain access to the
following parameters:
- setting of the voice commands,
- setting of the voice synthesiser (volume of the instructions
and other messages, male or
female),
- activation of the auxiliary input AUX. Defi ne the vehicle parameters
Once the "Defi ne the vehicle param-
eters" menu has been selected, you
can activate or deactivate certain
driving and comfort equipment:
- wiper linked with reverse gear
(refer to the "Visibility" section),
- "follow-me-home" lighting and duration (refer to the "Visibility"
section).
"Configuration" menu

 Press the "MENU" button on
the RT4 GPS audio/telephone
to gain access to the general
menu .

 Turn the dial to select the

"Confi guration" menu, then
press it to confi rm.
Once this menu has been selected,
you can gain access to the following
functions:

2
41

 Select the line "Duration of the
"follow-me-home" lighting" then
confi rm.
Example: setting the duration of the
"follow-me-home" lighting.

 Turn the dial to select the "Lighting
confi guration" menu, then press it
to confi rm.

 Select the duration then press
the dial.

 Turn the dial to set the value
required (15, 30 or 60 seconds),
then press the dial.


Select the "OK" box, then confi rm.
The RT4 GPS audio/tele-
phone must reinitialise and
restart in order to change
the voice used by the voice
synthesiser (male or female)
or the language used by the
system.
For safety reasons, it is im-
perative that confi guration of
the multifunction displays by
the driver takes place when
stationary.

3
42

3
43
VENTILATION

1. Windscreen de-icing or
demisting vent.

2. Side window de-icing or
demisting vents.

3. Side vents.

4. Central vents.

5. Air outlets to the front footwells.

6. Air outlets to the rear footwells.

7. Temperature sensor. Recommendations for use
If the interior temperature remains
very high following a long period
parked in the sun, do not hesitate to
ventilate the passenger compartment
for a few minutes.
For an even air distribution, make
sure that you do not block the out-
side air inlet grille, the vents and the
air outlets to the footwells.
In certain cases of particularly arduous
use (towing the maximum load on a
steep gradient in a high tempera-
ture), cutting off the air conditioning
permits recovery of the engine power
and therefore improvement of the
towing capacity.
Ensure that the passenger compart-
ment fi lter, located underneath the
windscreen, in the engine compart-
ment, is in good condition. Have the
fi lter elements replaced regularly
(refer to the chapter "Checks - § Checks").
If you drive in a dusty environment,
change them twice as often. We recommend the use of a
combined passenger compartment
fi lter. By means of its second special
active fi lter, it contributes to the
purifi cation of the air breathed by the
occupants and to the cleanness of the
passenger compartment (reduction
of allergic symptoms, unpleasant
odours and oily deposits).
Operate the air conditioning system for
5 to 10 minutes, once or twice a month,
to keep it in perfect working order.
To guarantee correct operation of
your air conditioning system, we also
recommend that you have it checked
regularly.
The condensation created by the
air conditioning results in a fl ow of
water underneath the vehicle when
stationary which is perfectly normal.
If the system does not produce
cold air, do not use it and contact a
PEUGEOT dealer.
Do not cover the temperature sen-
sor
7 , it is used for regulation of the
air conditioning.
The air conditioning system
does not contain chlorine
and does not present any
danger to the ozone layer.