SSANGYONG NEW REXTON 2012 Service Manual

Water pump and pipe
6. LAYOUT OF COOLING SYSTEM
From heaterThermostat (internal)
Reservoir
(coolant inlet hose)
Radiator
Radiator
Return hose
Coolant reservoir tank
From
heater
Radiator
Reservoir
(coolant inlet hose)
EEGR cooler
EGR cooler
Coolant port
Water pump

0000-00
Coolant port
Oil cooler
Oil filter capOil cooler
Oil cooler
Oil filter
PWM electric fan unitFan shroud
Electric fanFlap door
Cylinder headCylinder head
EGR coolerRadiator
upper hose
EGR cooler
Radiator
Oil pressure
switch
PWM electric fan
Coolant outlet port

Oil pan and baffle plate (integrated type) Oil strainer
Heavy-duty PCV oil separator
7. LAYOUT OF LUBRICATION SYSTEM
The first separation will happen when blow-by gas
passes through baffle plates in cylinder head
cover. Then oil and gas will be separated due to
cyclone effect after entering the oil separator inlet
port. Separated oil returns to oil pan via oil drain
port and the gas will be burnt again after entering
the combustion chamber through air duct hose
via PCV valve that opens/closes due to pressure
differences between the intake side and
crankcase.
Cylinder head
cover (oil + gas)Intake air
duct hose
(blow-by gas)
Baffle plate
Oil gauge pipe
Oil dipstick gauge

0000-00
Cylinder head cover
Low oil pressure warning lamp (on
instrument cluster)
Oil filter and oil cooler
Oil
coolerOil
filter

InjectorFuel filter and priming pump
8. LAYOUT OF FUEL SYSTEM
Components
IMV connector
Pressure sensor
in fuel rail
High pressure
fuel pipe
Fuel pipe
Common rail IMV connector
HP pump
Priming pumpFuel filter
Connector
Returned fuel
from HP pumpFuel filter
Fuel tank
HP pump
Fuel tank
Fuel return port
Low pressure fuel supply portVenturi
Fuel return portFuel temperature
sensor
IMV valve
IMV connectorHigh pressure fuel
supply port
(with orifice)

0000-00
Schematic Diagram

0000-00
1. SPECIFICATIONS

2) Engine Performance Curve
Output and Torque

0000-00
Oil Temperature/Pressure and Boost Pressure