TESLA MODEL 3 2019 (Europe) Manual Online

If Autosteer is unable to detect lane markings,the driving lane is determined based on the
vehicle you are following.
In most cases, Autosteer attempts to center Model 3 in the driving lane. However, if the
sensors detect the presence of an obstacle (such as a vehicle or guard rail), Autosteer
may steer Model 3 in a driving path that is
offset from the center of the lane.Warning: Autosteer is not designed to,
and will not, steer Model 3 around objects
partially or completely in the driving lane.
Always watch the road in front of you and
stay prepared to take appropriate action. It is the driver

Canceling Autosteer
Autosteer cancels when:

As the lane change is in progress, Overtake
Acceleration is activated, allowing Model 3 to accelerate closer to a vehicle in front (see
Overtake Acceleration on page 76). Midway
through the lane change, Auto Lane Change must be able to detect the target lane

Autopark
If you have purchased the optional Enhanced Autopilot or Full Self-Driving Capabilitypackage, Autopark uses data from theultrasonic sensors and GPS to:

In situations where Autopark cannot operatedue to inadequate sensor data, the
touchscreen displays a message indicating that you must manually park Model 3.
Note: If you press the brake when Autopark is
actively parking Model 3, the parking process
pauses until you touch Resume on the
touchscreen.
Note: Autopark detects potential
perpendicular parking spaces that are at least
9.5 feet (2.9 meters) wide with a vehicle
parked on each side. Autopark detects parallel
parking spaces that are at least 20 feet (6
meters), but less than 30 feet (9 meters) long.
Autopark does not operate on angled parking spaces.Warning: Never depend on Autopark to
find a parking space that is legal, suitable,
and safe. Autopark may not always detect
objects in the parking space. Always
perform visual checks to confirm that a
parking space is appropriate and safe.Warning: When Autopark is actively
steering Model 3, the steering wheel moves in accordance with Autopark

Using Summon
Note: Summon is a BETA feature. Summon is
designed and intended for use only on private
property where the surrounding area is
familiar and predictable. When using Summon, you must continually monitor the vehicle. It is
the driver

Lane Assist
The cameras monitor the markers on the lane
you are driving in and the ultrasonic sensors
and Autopilot cameras monitor the
surrounding areas and the blind spot for the
presence of a vehicle or other objects.
When an object is detected in your blind spot
or close to the side of Model 3 (such as a
vehicle, guard rail, etc.), colored lines radiate
from the image of Model 3 on the
touchscreen. The location of the lines
correspond to the location of the detected object. The color of the lines (white, yellow,
orange, or red) represents the object

Collision Avoidance Assist
The following collision avoidance features are
designed to increase the safety of you and your passengers: