TOYOTA 4RUNNER 2004 N210 / 4.G Navigation Manual

4Runner_Navi_U (L/O 0308)
123
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
OTHER FUNCTIONS
Other functions
Screen adjustment124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen transition125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION IV

4Runner_Navi_U (L/O 0308)
124
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
You can adjust the brightness or con-
trast of the screen depending on the
brightness of your surroundings. You
also can turn the screen off.
1. Push the
“DISPLAY” button. The following adjustment screen appears.
L00181NZN043
BRIGHTNESS: Adjusts the brightness of
the screen.
CONTRAST: Adjusts the contrast of the
screen.
2. Touch “+” or “” for adjustment.
“”: The screen becomes dark or its con-
trast becomes weak.“+”: The screen becomes bright or its
contrast becomes strong.You can adjust the brightness and con-
trast with exterior light on or off individu-
ally.
3. After adjusting the brightness and contrast, touch the
“OK” switch.
Touching the
“SCREEN OFF” switch
turns the screen off.
Screen adjustment

4Runner_Navi_U (L/O 0308)
125
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
NZN065
Depending on the position of the head-
light switch, the screen changes to the
day mode or night mode.
To display the screen in the day mode
even with the headlight switch on, touch
“DAY MODE” on the adjustment screen
for brightness and contrast control.
However, if the instrument panel light
control is adjusted to full intensity, mode
switching cannot be done. It remains in
the day mode. In this case, “DAY MODE”
is not shown on the screen.
If the screen is set in the day mode with
the headlight switch turned to on, this
condition is memorized in the system
even with the engine turned off.
NZN044
You can select a function that enables
automatic return to the previous
screen from the audio screen.
1. Push the
“INFO” button to display the “Information Menu” screen. Touch “Screen Transition”.
Screen transition

4Runner_Navi_U (L/O 0308)
126
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
NZN045
2. Select “ON” or “OFF” and then touch “OK”.
ON:The previous screen automatically
returns from the audio screen 20
seconds after the end of audio op-
eration.
OFF: The audio screen remains on.

4Runner_Navi_U (L/O 0308)
127
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)

4Runner_Navi_U (L/O 0308)
128
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
AUDIO SYSTEM
Audio system
Quick reference for your audio system129 . . . . . . . . . . . . . . . . . . . . . . .
Your audio system130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using your audio system131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio remote controls146 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Car audio system operating hints150 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION V

4Runner_Navi_U (L/O 0308)
129
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
Function switch display screen
Touch the switches displayed on
the screen to control the radio,
cassette tape player and compact
disc player. For details, see page
132.“TUNE” knob
Turn this knob to move up or
down the station band. For
details, see page 135.
“AM” button
Push this button to choose an AM
station. For details, see pages
131 and 135.
“FM” button
Push this button to choose a FM
station. For details, see pages
131 and 135.
“DISC” button
Push this button to turn the
compact disc player on. For
details, see pages 131 and 142.
“TAPE” button
Push this button to turn the
cassette tape player on. For
details, see pages 131 and 139.
“TRAF” button
Push this button to seek a station
that broadcasts traffic information
regularly. For details, see page
138. “OPEN” button
Push this button to open the
display to access the slots for the
cassette tape player and compact
disc player. For details, see pages
130, 139 and 143.
“PWR·VOL” knob
Push this knob to turn the
audio system on and off, and
turn it to adjust the volume.
For details, see page 131.
“SEEK/TRACK” button
Push either side of this button
to seek up or down for a
station, or to access a desired
program or track. For details,
see pages 135, 142 and 144.
“SCAN” button
Push this button to scan radio
stations or scan the tracks on
a compact disc. For details,
see pages 136 and 145.
“AUDIO” button
Push this button to display the
audio control screen. For
details, see page 131.
“TILT” button
Push this button to tilt the
display. For details, see page
130.
Quick reference for your audio system

4Runner_Navi_U (L/O 0308)
130
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
L00004
You can adjust the angle of the dis-
play by pushing the “TILT” button.
Each push of the “TILT” button will tilt
the display to position 1, 2, 3 and then
back to 0 in that order.
If you turn the ignition switch off, the
display will automatically move back to
position 0. The display will automatically
resume the previous position you used
when the ignition switch is turned to the
“ACC” or “ON” position.
The slots for the cassette tape player
and compact disc player are behind
the display.
To lower the display, push the “OPEN”
button. After you inserting the cassette
tape or compact disc, push the button
again to close the display.
CAUTION
Do not place anything on the
opened display, as such items may
be thrown about in the compart-
ment and possibly injure people in
the vehicle during sudden braking
or in an accident.
To reduce the chance of injury in
case of an accident or sudden
stop while driving, keep the dis-
play closed.
Take care not to jam your hand
while the display is moving. Other-
wise, you could be injured.
NOTICE
Do not obstruct the display while it
is moving. It could damage your au-
dio system.
Your audio system

4Runner_Navi_U (L/O 0308)
131
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
This section describes some of the basic
features of the Toyota audio system.
Some information may not pertain to your
system.
Your audio system works when the igni-
tion switch is in the “ACC” or “ON” posi-
tion.
NOTICE
To prevent the battery from being
discharged, do not leave the car au-
dio on longer than necessary when
the engine is not running.
L00166
(a) Turning the system on and off
PWR·VOL: Push this knob to turn the
audio system on and off. Turn this knob
to adjust the volume. The system turns
on in the last mode used.
AUDIO: Push this button to display
switches for audio system (audio control
mode).
You can select the function that enables
automatic return to the previous screen
from the audio screen. See page 125 for
details.Push “AM”, “FM”, “DISC” or “TAPE”
button to turn on the desired mode.
The selected mode turns on immedi-
ately.
Push these buttons if you want to switch
from one mode to another.
If the tape or disc is not set, the cassette
player or compact disc player does not
turn on.
You can turn off the cassette player or
compact disc player by ejecting the cas-
sette tape or compact disc. If the audio
system was previously off, then the entire
audio system will be turned off when you
eject the cassette tape. If another func-
tion was previously playing, it will come
on again.
Using your audio system—
—Some basics

4Runner_Navi_U (L/O 0308)
132
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
The switches for radio, cassette tape
player, compact disc player operation
is displayed on the function switch
display screen when the audio control
mode is selected. Touch the switches
lightly and directly on the screen.
The selected switch is highlighted in
green.
INFORMATION
If the system does not respond to
a touch of a switch, move your fin-
ger away from the screen and then
touch it again.
You cannot operate dimmed
switches.
Wipe off fingerprints on the surface
of the display using a glass clean-
ing cloth.