TOYOTA HILUX 2012 Owners Manual (in English)

401 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
Receiving a call
When a call is received, the following screen is displayed together
with a sound.
To answer the phone:
• Press on the steering
wheel.
•Touch .
To refuse a call
Press on the steering wheel or touch .
To adjust the incoming call volume
Touch “-” or “+”. You can also adjust the volume using the steering
switches or volume knob.
International calls
Received international calls may not be displayed correctly depending on
the cellular phone in use.

402 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)
Speaking on the phone
The following screen is displayed when speaking on the phone.
To adjust the incoming call volume
Touch “-” or “+”. You can also adjust the volume using the steering
switches or the volume knob.
To prevent the other party from hearing your voice
Touch “Mute”.

403 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)Inputting tones
When using phone services such as an answering service or a
bank, you can store phone numbers and code numbers in the
phonebook.
Touch “0-9”.
Input the number.
If repeated tone symbols* are
stored in the phone book, “Send”
and “Exit” are displayed on the
right side of the screen.
*: Repeated tone symbols are sym-
bols or numbers displayed as p or
w, that come after the phone
number. (e.g. 056133w0123p#1
)
Confirm the number displayed on the screen, and touch
“Send”.
If you touch “Exit”, this function will end.
STEP1
STEP2
STEP3
STEP4

404 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)To transfer a call
Touch “Handset Mode” to change from Hands-free call to cellular
phone call.
Touch “Handsfree Mode” to change from cellular phone call to
Hands-free call.
To hang up
Press on the steering wheel or touch .
Call waiting
When a call is interrupted by a third party while talking, the incom-
ing call message will be displayed.
To talk with the other party:
• Press on the steering
wheel.
•Touch .
To refuse the call:
• Press on the steering
wheel.
•Touch .
Every time you press on the steering wheel or touch
during call waiting, you will be switched to the other party.

405 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
Transferring calls
It is not possible to transfer from hands-free to the cellular phone while
driving.
If you transfer from the cellular phone to hands-free, the hands-free
screen will be displayed, and you can operate the system using the
screen.
Transfer method and operate may vary according to the cellular phone
used.
For operation of the cellular phone in use, see the phone’s manual.
Call waiting operation
Call waiting operation may differ depending on your phone company and
cellular phone.

406
3-3. Using the “touch screen”
HILUX_EE (OM0K132E)
Setting the hands-free system
You can set the hands-free system to your desired settings.
Setting the sound
Phonebook settings
To display the screen shown above, press “SETUP”, and touch
“Telephone” on the “Setup” screen.

407 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
Setting the sound
Display the “Telephone settings” screen. (P. 406)
Touch “Sound settings” on the “Telephone settings” screen.
Changes the speaker volume
(P. 407)
Changes the ring tone volume
(P. 407)
Changes the ring tone
(P. 408)
Restore default settings
Setting the volume
Touch “Call volume” or “Ring tone volume” on the “Sound
settings” screen.
Touch “-” or “+” to lower or raise
the volume, and then “OK”.
When you complete all settings, touch “OK”.
STEP1
STEP2
STEP3
STEP1
STEP2
STEP3

408 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)Setting the ring tone
Touch “Ring tone” on the “Sound settings” screen.
Touch “Tone 1”, “Tone 2” or
“Tone 3” to change the ring tone,
and then “OK”.
When you complete all settings, touch “OK”.
STEP1
STEP2
To return to the default volume settings
Touch “Default”, and then “Yes”.
STEP3

409 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
Phonebook settings
The phonebook manages a maximum of 5 phones in total. The data
for 1000 contacts (up to 3 numbers per contact) can be registered in
each phonebook.
Managing the contacts
Managing the speed dials
Deleting the call history
To display the screen above, follow the steps below.
Display the “Telephone settings” screen. (P. 406)
Touch “Phonebook” on the “Telephone settings” screen.
STEP1
STEP2

410 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)Managing the contacts
Transferring a phone number
You can transfer the phone numbers in your Bluetooth
 phone to the
system. Operation methods differ between PBAP compatible and
PBAP incompatible Bluetooth
 phones. If your cellular phone does
not support either PBAP or OPP services, you cannot transfer con-
tacts.
Display the “Phonebook settings” screen. (P. 406)
Touch “Manage contacts” on the “Phonebook settings”
screen.
Touch “Transfer contacts”.
STEP1
STEP2
STEP3