VOLVO XC90 TWIN ENGINE HYBRID 2017 Owners Manual

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.169
Adjusting the passenger's seat from
the driver's seat*
Using the controls on the side of the driver'sseat, the driver can adjust the position of thefront passenger's seat.

Activating the function in the center
display
From the center display, the function can be acti-vated in two ways.
After activating the function, adjust the passeng-er's seat within 10 seconds. If no adjustmentsare made in that time span, the function deacti-vates automatically.

Activating from Function view
1. Go to the center display's Function view.
2.Activate the function by tapping Adjustpassenger seat.

Activating from Settings
–In the center display, select SettingsMy
CarSeatsAdjust Passenger SeatFrom Driver Position.
Power seat controls
Move the passenger's seat forward/rearwardby moving the control forward/rearward.
Change the passenger seat's backrest tilt bymoving the control forward/rearward.
Related information
•Power front seats* (p. 168)
•Adjusting power front seats* (p. 168)
•Seat belts (p. 66)
Using the power seat memory
function*
The memory function can be used to store thesettings (positions) of the power front seats*,door mirrors and the head-up display*.
Three different settings can be stored using thisfunction. Memory controls are found on one orboth of the front doors*.
Button for storing a position
Button for storing a position
Button for storing a position
M (memory) button

Storing a position
1. Adjust the seat, door mirrors and head-updisplay to the desired positions.

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.170
2.Press and release the M button. The indica-tor light in the button will illuminate.
3.Press button 1, 2 or 3 within 3 seconds tostore the current position of the seat/mirrors/head-up display in the selected but-ton.
> When the position has been stored in theselected button, an audible signal willsound and the indicator light in the M but-ton will go out.
If none of the buttons (1, 2 or 3) are pressedwithin 3 seconds, the indicator light in the M but-ton will go out and the position will not be stored.
The seat/mirrors/head-up display must bemoved before new settings can be stored.

Using a stored position
A stored position can be used when one of thefront doors is opened or closed:

Front door open
–Press one of the bottons (1–3) briefly. Theseat, door mirrors and head-up display willmove to the positions stored in that button.

Front door closed
–Press and hold one of the buttons (1–3) untilthe seat, door mirrors and head-up displayhave moved to the positions stored in thatbutton.
The seat, door mirrors and head-up display willstop automatically if the button is released beforethe they have reached the stored positions.
WARNING
•Because the driver's seat can be adjustedwith the ignition off, children should neverbe left unattended in the vehicle.
•Movement of the seat can be STOPPEDat any time by pressing any button on thepower seat control panel.
•Do not adjust the seat while driving. Theseat should be adjusted so that the brakepedal can be depressed fully. In addition,position the seat as far rearward as com-fort and control allow.
•The seat rails on the floor must not beobstructed in any way when the seat is inmotion.

Related information
•Adjusting power front seats* (p. 168)
•Power front seats* (p. 168)
Multifunctional front seats*
In addition to the adjustment settings offered bythe power seat controls, the multifunction controlprovides additional possibilities for convenienceand comfort.
Multifunction control on the side of the seat
The multifunction control can be used to adjustlumbar support*, the backrest's side bolsters*, thelength of the seat cushion and the massagefunction*. The adjustment settings made with thecontrol are shown in the center display* and cer-tain settings can be made directly from the cen-ter display.

Center display
The adjustment settings for the driver and pas-senger seats made using the multifunction con-trol are shown in the center display. If only oneseat is adjusted, the settings are shown in the

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.171
center of the display. If both seats are adjusted,the settings for the driver seat are shown on theupper half of the screen and the ones made forthe passenger seat are on the lower half.
Press the Home button on the center console toexit the seat adjustment setting view.

Related information
•Power front seats* (p. 168)
•Adjusting function settings in the multifunc-tional front seats* (p. 171)
•Turning seat heating* on and off (p. 210)
Adjusting function settings in the
multifunctional front seats*
The multifunction controls on the side of the seatas well as the center display can be used tomake seat adjustments. The adjustment settingsare shown in the center display*.
Multifunction control on the side of the seat
Turn the control up or down to activate.

Front seat massage settings *
The front seat backrests have a massage func-tion. Air-filled cushions provide the massagingaction and a number of settings are available.
The massage function can only be used whenthe engine is running.
Massage view in the center display
1. Activate the multifunction control by turningit up or down. Seat settings will be displayedin the center display.
2.Tap Massage in the seat settings view.

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.172
3. Select massage settings by tapping the cen-ter display or by moving the cursor up/downusing the multifunction control's upper/lowerbuttons. Change a setting in the selectedfunction by tapping the arrows on the centerdisplay or by using the multifunction control'sfront/rear buttons.

Massage settings
The following massage settings are available:
•On/Off.
•Program 1-5: There are 5 preset massageprograms. Select Swell, Tread, Advanced,Lumbar or Shoulder.
•Intensity: Select Low, Normal or High.
•Speed: Select Slow, Normal or Fast.

Restarting the massage function
Massage restart button in the center display
The massage function switches off automaticallyafter 20 minutes and must be restarted manuallyfor continued use.
Tap Restart in the center display to restart theselected massage program.
Adjusting the side bolsters in the front
seats *
The side bolsters in the front seat backrests canbe inflated/deflated to adjust the amount of sup-port provided.
Side bolster view in the center display
1. Activate the multifunction control on the sideof the seat by moving it up/down. The seatsettings view will appear in the center dis-play.
2.Select Side bolsters in the seat settingsview.
•Tap the front button to increase bolstersupport.
•Tap the rear button to decrease bolstersupport.

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.173

Adjusting front seat lumbar support *
Lumbar support can be adjusted up/down/front/rear.
Lumbar support view in the center display
1. Activate the multifunction control on the sideof the seat by moving it up/down. The seatsettings view will appear in the center dis-play.
2.Select Lumbar in the seat settings view.
•Tap the button up/down to move lumbarsupport up/down.
•Tap the front button to make lumbar sup-port firmer.
•Tap the rear button to make lumbar sup-port softer.

Extending the seat cushion
The seat cushion can be extended/retractedusing the multifunction control.
Seat cushion extension view in the center display
1. Activate the multifunction control on the sideof the seat by moving it up/down. The seatsettings view will appear in the center dis-play.
2.Select Cushion extension in the seat set-tings view.
•Tap the front button to extend the cush-ion.
•Tap the rear button to retract the cushion.

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.174

Related information
•Multifunctional front seats* (p. 170)
Easy access to and from the driverseat
The Easy Ingress & Egress function can beused to make getting into and out of the driver'sseat easier.

Easy egress
To make getting out of the driver's seat easier,the seat is lowered, the side bolster deflates andthe seat cushion retracts at the same time.
The easy egress function must be activated inthe center display.
–Switch off the engine and open the driver'sdoor.
>The seat, side bolsters and seat cushionall move at the same time to a positionthat makes it easier to leave the seat.

Easy ingress
The seat remains in the easy egress positionwhen the driver leaves the vehicle. When thedriver returns to the vehicle, the seat is in a posi-tion to make sitting down easier. When the driveris seated, has buckled the seat belt and has putthe ignition in at least mode 1, the seat will returnto the driver's preferred position.

Activating/deactivating the function
1.In the center display, select SettingsMy
CarSeats.
2. Activate/deactivate the function by select-ing/deselecting the Easy Ingress & Egressbox.
Related information
•Power front seats* (p. 168)
•Ignition modes (p. 400)

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.175
Rear seats
Your vehicle has three rows of seats. The sec-ond row of seats has three individual seatingpositions and the third row of seats has two indi-vidual seating positions.

Related information
•Adjusting the second row backrest tilt(p. 177)
•Adjusting the second row head restraints(p. 175)
•Folding the second row backrests (p. 178)
•Folding the third row backrests (p. 180)
•Getting into and out of the third row of seats(p. 179)
•Moving the second row seats forward/rear-ward (p. 176)
•Turning seat heating* on and off (p. 210)
Adjusting the second row headrestraints
The center head restraint in the second row ofseats can be adjusted to suit the height of theseat's occupant. The outboard head restraintscan be folded down* for a better rear view.

Adjusting the center head restraint
The center head restraint should be adjusted upor down according to the passenger's height. Therestraint should be carefully adjusted to supportthe occupant's head.
The center rear seat head restraint should onlybe in its lowest position when this seat is NOToccupied. When the center seat is occupied, thehead restraint must be correctly adjusted to thepassenger

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.176

Electrically folding down the rear seat

INSTRUMENTS AND CONTROLS
}}
177

Related information
•Rear seats (p. 175)
•Getting into and out of the third row of seats(p. 179)
Adjusting the second row backresttilt
Backrest tilt can be adjusted separately for eachof the second row seats.

Center seat
1. Pull the strap on the center seat's right side.
2.Adjust backrest tilt forward/rearward bydecreasing/increasing pressure on it.
3. Release the strap to lock the backrest in thenew position and press the backrest until itslock engages.
Outboard seats
1. Pull the handle on the side of the seatupward.
2.Adjust backrest tilt forward/rearward bydecreasing/increasing pressure on it.
3. Release the handle to lock the backrest inthe new position and press the backrest untilits lock engages.

WARNING
Check that all backrests are securely lockedin place after changing the tilt angle.

Related information
•Rear seats (p. 175)
•Moving the second row seats forward/rear-ward (p. 176)

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.178
•Folding the second row backrests (p. 178)
•Seat belts (p. 66)
Folding the second row backrests
The second row of seats has three individualseating positions whose backrests can befolded down separately.

CAUTION
•To help avoid damage to the seat uphols-tery, before a rear seat backrest is foldeddown, remove any objects from the seatand ensure that the seat belts are notbuckled.
•The integrated booster cushion* in thecenter position must be stowed (foldeddown) before the backrest is foldeddown.
•The center seating position armrest mustbe folded up before the backrest isfolded down.

NOTE
•It may be necessary to adjust the frontseat backrests and/or move these seatsforward in order to fold down the rearseat backrests completely.
•It may also be necessary to move thesecond row of seats rearward.
WARNING
Adjust the seat and be sure it is locked in thenew position before driving.

Center seat
To fold down the backrest:
1.Fold down the head restraint manually.
2. Pull the strap on the center seat's right side.
3. Fold the backrest down until it locks in posi-tion. The seat cushion will move downward/forward as the backrest is folded down tocreate a flat surface.
To return the backrest to the upright position:
1. Pull the strap.
2. Fold the backrest and release the strap.Push it into position until its lock engages.