warning AUDI A5 COUPE 2013 Owners Manual

paint extra protection, particularly if water no
l onger beads on the clean paint .
P rotec t plastic body pa rts with ca r wax in the
same way as the vehicle body.
During warm weather dead insects tend to
collect on the front bumper and on the for­
ward area of the hood . They a re much easier
to remove from paint that is waxed
often.
Poli shing
Polish your vehicle only if the pa int has lost its
shine and the g loss cannot be brought back
with wax.
If the polish used does not conta in preserva ­
tive compounds, the paint must be waxed af­
terwards .
A WARNING
Always read and heed a ll WARNINGS and
other information
¢ page 200.
(D Note
Do not use car wax on
- matte or anod ized metal trim
- rubber or rubber-like tr im .
Trim strips
Metal trim needs special core.
For env ironmenta l reasons , Aud i fabricates
the bright tr im strips and trim pieces from
pure chromium-free a lum inum.
Dir t and mar ks on the trim str ips should be
removed with a
pH-balan ced cl eaning agent
(do not use a chrome cleaner) . Authorized
Audi dealers ca rry clea ning products w hich
have been tested for use on your vehicle and
are not harmful to the env ironment.
To avoid cor ros ion on the exterior trim str ips,
only a pH-balanced sol ution should be used
for the windshield washer.
A WARNING
Always read and heed a ll WARNINGS and
other information
¢ page 200.
Cleaning and protec tion 203
Plastic and vinyl
Plastic needs special core .
Use a clean, damp cloth or sponge to remove
dust and light surface dirt. For o ther soil, use
a lukewarm all-purpose cleaning so lu tion or a
mild saddle soap for v inyl tr im . Remove water
spots and traces of soap with a clean, damp
cloth or sponge. Use a clea n, soft cloth to rub
dry.
Grease, tar or oil stains can be removed w ith a
clean cloth or sponge soaked with all-purpose
cleaner or with a so lvent designed espec ially
to clean v inyl.
Occas ionally app ly a colorless v inyl or leather
preservative to retain the material's luster
and pliability .
A WARNING
Always read and heed all WARNI NGS and
other information
¢ page 200 .
Aluminum trim
Use only neutral-pH products to remove spots
and deposits from a luminum surfaces .
Chrome care products and a lkaline cleaners
will attack a luminum surfaces and can dam ­
age them over t ime.
A WARNING
A lways read and heed all WARNINGS and
other information
¢ page 200 .
Touch-up paint
Minor point damages should be touched up
immediately.
.. Use either a touch-up paint stick or spray
paint to cover m inor scratches and nicks.
Your a uthorized Audi dea ler has touch -up
paint for minor scratches and stone chips.
Scratches sho uld be touched up soon after
they occur to prevent corrosion .
•
•

204 Cleaning and protec tio n
If a spot starts to rust, however, a simple
touch-up job will not be enough . The affected
surface must be sanded smooth and coated
with an anti-rust pr imer before the pa inted
f inish can be restored.
The number for the origina l vehicle paint can
be found on the vehicle ident ificat ion labe l
c::>page269.
A WARNING
Always read and heed all WARNINGS and
other information
c::> page 200.
Windows
Clear vision to all sides.
C lean a ll windows regularly to remove road
fi lm and car wash wax b uildup.
"' Remove snow from windows using a brush.
"' Use a plast ic ice scraper to remove ice from
windows and mirrors .
"' Remove other residue on the windows with
a spray •on glass cl eaner .
"' Wipe the windows dry with a clean p iece of
cloth or kitchen paper towel.
The best way to remove snow from windows
and mirrors is to use a brush . Use a non-abra­
sive
pla stic ice sc raper -better still, a spray
de icer -to remove
ic e from windows and mir­
rors .
The windows must not be cleaned with insect remover or wax s ince these can interfere with
the function of the windshield wiper blades (chatter) .
O il, grease, or silicone residue can be removed
with
g lass clea ner or silicone remo ver . How­
ever, wax residue requires the use of a special­ ly formulated solvent . Please contact your au ­
thor ized Audi dealer for adv ice on safe prod­
ucts for wax removal.
W indows should also be cleaned on the inside
at regular intervals .
Never dry w indows with the same chamois
that you use to dry painted surfaces . Wax resi- due on the chamois can impai
r vision through
the windows.
A WARNING
-- Always read and heed all WARNINGS and
other information
c::> page 200.
-The windshield must not be treated with
water-repellent materials. They can in­
crease glare under poor v is ibility condi­
tions such as wetness, darkness, or when
the sun is low on the hor izon. In addi­
tion, they can cause the w indshield w ip­
ers to chatter.
(D Note
- Never use warm or hot water to remove
snow and ice from windows and mirrors .
Th is could cause the glass to crack .
- To prevent damage to the wires of the
rear defogger, do not place any adhesive
st ickers on the ins ide of the rear window
over the wires .
- To help prevent dirt from scratching the
window, always sc rape in a forward di ­
rection -pushing the sc raper away from
yo u -never bac k and fort h.
- Wate r lea king from the ins ide of the rear
w indows may damage sens it ive elec trical
components located ei ther under the
rear parcel shelf or in the rear trunk area .
Always ensure that water never leaks
through the body section of the vehicle.
You can do this by using waterproof pro­
tection over the vehicle's electrical com­
ponents (e .g. when installing window
tinting) .
- Damage or malfunction of electrical
components due to water damage or any
other outside infl uence is not covered by
the Audi New Veh icle Limited Warranty.
See you r Wa rranty
& M ain tenance book ­
le t for addit ional deta ils abou t your war­
ranty.

Cast (light) alloy wheels
Cast (light) alloy wheels require special care.
~ Wash the wheels with a sponge or hose
brush every other week.
~ For deep cleaning afterwards, use only a
dedicated
aci d-fr ee cast alloy wheel cleaner.
~ Rub a coat of liqui d wax onto the r ims every
t hr ee month. Be sure to reach and treat a ll
parts of the r im.
To preserve the decorat ive appearance of the
cast alloy whee ls, some special care is neces­
sary. I n add it ion to road d ir t and sa lt, b rake
dust is a lso cor ros ive. If left on for too long,
b rake dus t ca n cause pitting.
Use only specia l
acid-free cleaners formulated
fo r alloy rims. Safe products are available at
your author ized Audi dealer. Never leave the
cleane r on the rims longer than specif ied on
the label. If not rinsed
off promptly, the acid
contained in some cleaners can attack the
threads on the whee l bolts.
Never use abras ive or metal polishing clean­
ing agents.
If the protective coating has been
chipped, e .g. by kicked up road dirt, touch it
up as soon as possib le.
A WARNING
- Moisture and ice on brakes may affect
braking efficiency
q page 188. Test the
brakes carefully each time you wash the
vehicle .
- Always read and heed all WARNINGS and
other information
q page 200.
Body cavity sealing
-
The body cavity sealing does not need to be
checked.
All body cavities which co uld be affected by
corrosion have been thoro ughly protected at
the factory.
This sea ling does not require any inspection or
addit ional treatment . If any wax should seep
out of the cav ity when the ambient tempera-
Cleaning and protec tion 205
ture is high, it can be removed with a p lastic
scraper and a suitable solvent.
A WARNING
Solvents can be dangerous.
- Benzine is flammab le and toxic. If you
use benzine fo r removing the wax, keep
sparks, flame and lighted cigarettes
away. Never dump benz ine on the
ground, i nto open streams or down sew­
age drains.
- Be sure to observe all safety and environ­
mental regulations. Follow all instruc­
tions on the container.
- Always read a nd heed all WARNINGS and
other information
q page 200.
Chassis
Have the undercoating checked for damage
from time to time.
The lower body she ll of your Audi is also thor­
oughly protected against corros ion.
Any damage to the unde rcoat ing caused by
road hazards sho uld be repaired prompt ly .
A WARNING
Too much undercoating i n the wrong p la­
ces can cause a fire.
- Do not apply additiona l undercoating or
r u stproof ing on or near the exhaust
manifold, exhaust pipes, catalytic con­
verter or heat shields. While driving, the substance used fo r undercoating could
overheat and cause a fire.
- Always read and heed all WARNINGS and
other information
q page 200.
Exhaust tail pipes
Road salt and other co rrosive materials w ill
damage the mate rial in the exhaust tail pipes
i f th ey a re not clea ned regularly. Do not clea n
the tail pipes with wheel cleane r, pa int polish,
c h rome pol ish or o ther ab ras ive cleane rs .
Clean the tail pipes with ca r care products
that are suitable fo r stainless steel. •
•

206 Cleaning and protection
Your authorized Audi dealer can provide clean­
ing prod ucts that have been tested and ap­
proved for your vehicle .
Care of interior
Infotainment components
The Radio/MM !* display may be cleaned with
a soft cloth and commerc ially-avai lable "LCD
cleaner" . The cloth should be coated lightly
when the cleaning solution when cleaning the
display.
The
MM I* controls must be cleaned first with
a brush so that dirt does not enter the unit or
enter between the buttons and the housing.
Then wiping the controls with a cloth damp­
ened with dish detergent and water is recom­mended.
(D Note
- To avoid scratching the disp lay, you
shou ld never clean it dry.
- To prevent damage, make sure fluids do
not enter the controls.
Aluminum trim
Use only neutral -pH products to remove spots
and depos its from alum inum surfaces.
Chrome care products and alkaline cleaners
will attack alum inum surfaces and can dam­
age them over time.
..&, WARNING
Always read and heed all WARNINGS and
other information
¢ page 200.
Fabrics and fabric coverings
Fab rics and fabric coverings (e.g. seats, doo r
trim panels, etc.) should be cleaned at regular
interva ls with a vacuum cleaner. This removes
surface dirt particles which could become em­
bedded in the fabr ic through use. Steam
cleaners should not be used, because the
steam tends to push the dirt deeper into the
fabr ic and lock it there.
Normal cleaning
Generally, we recommend using a soft sponge
or a lint-free microfiber cloth to the clean fab­
ric. Brushes shou ld only be used for carpets
and floor mats, since other fabric surfaces
could be harmed by brushes.
Normal surface stains can be cleaned using a
commercially availab le foam cleaner . Spread
the foam on the surface of the fabric with a
soft sponge and work it in gently. Do not satu­
rate the fabric. Then pat the foam dry using
absorbent, dry cloths (e.g. m icrofiber cloth)
and vacuum it after it has dried completely.
Cleaning stains
Stains caused by beverages (e.g. coffee, fruit
juice, etc.) can be treated with a mild deter­
gent solution. Apply the detergent solution
with a sponge. In the case of stubborn stains,
a detergent paste can be applied directly to
the stain and worked into the fabric. After­
wards, use copious amounts of clean water to
remove the remaining detergent. Apply the
water with a damp doth or sponge and pat
the fabric dry with an absorbent, dry cloth .
Stains from chocolate or makeup should have
detergent paste rubbed into them . After­
wards, remove the soap with water (damp
sponge).
Alcohol can be used to treat stains from
grease, o il, lipstick or a ballpoint pen. Melted
grease or dye must be patted off using ab­
sorbent material.
It may be necessary to re ­
treat the areas with detergent paste and wa­
ter.
In the case of general soiling of the upho ls­
tery and cover material, we recommend hiring
a specia list that has the equipment to clean
the seat covers and other fabr ic surfaces by
shampooing and spray extraction.
..&, WARNING
-Always read and heed all WARNINGS and
the information
i:> page 200.

@ Tips
Open Velcro fasteners on your clothing can
damage the seat cover. Please make sure
that Velcro fasteners are closed.
Plastic parts and instrument panel
Always use a clean cloth moistened in clear
water to clean these areas . For pers istent dirt
use an Audi approved
s ol vent-fr ee plastic
cleane r/protectant.
_& WARNING
So lvents can change the properties of
some plast ics and make i t harder for the
airbag to dep loy.
-
- Never clean the instr ument pane l or the
s u rface of airbag modules with cleaning
products that contain solvents.
- Products containing solvents w ill mak e
the surface of this part porous.
- Serious injur ies can result if plas tic par ts
come loose when the airbag is deployed .
- Always read and heed all WARN INGS and
other informa tion ¢
page 200.
(D Note
Clea ning agents contain ing solvents will
attac k the mater ial a nd can change the
way it behaves.
Natural leather
Applies to vehicles: with natural leather
Audi makes great efforts to maintain the
properties, natural look and feel of interior
leather.
General
We offer many different types of leather on
our veh icles . Most are different types of nappa
l eather, which has a smooth surface and
comes in var ious co lors .
The intensity of the color determines the v isu ­
al characteristics and appearance.
If the sur­
face of the leathe r has a typical natural look,
then the leather is a nappa leat her tha t has
Cleaning and protec tion 207
been left in a re lative ly natural condit ion . This
leather offers particular ly good comfort and
breathes well. Fine veins, closed grains, insect
bites, sk in fo lds, and subt le variations in color
rema in v isible. These character istics demon­
strate that the material is natural.
Natura l nappa leather is not covered by a co l­
or finish. It is therefore more sens itive to soil­
ing and wear, which is someth ing you need to
consider if children, animals or other facto rs
mig ht prove to be part icularly hard o n the
l eather .
By contrast, leather types that are covered by
a colo red finish layer are more durable. This
has a positive effect on the leather's resist­
ance to wear and soiling in dai ly use . On the
othe r hand, the typ ical character istics of natu ­
ral leathe r are barely or not app arent. Howev­
er, th is does not mean that the leathe r itse lf
is of infe rior quality.
Care and handling
Because of the exclusive nature of the types of
leather that Aud i uses and their uniq ue p rop­
erties (such as sen sitiv ity to oils, grease, soil­
i ng, etc.), you w ill need to be somewhat ca re ­
ful with these leathers, and a certain type of care is requi red. For example, dark clothing
mater ia ls can disco lor leather seats (especia l­
ly if such clothing is damp and was not dyed
correct ly) . Dust and dirt particles in pores,
folds, and seams can have an abrasive effect
and can damage the leather surface as well as
weaken seams.
The leather should be cleaned regularly as
needed . After hav ing been used for a relat ively
long time, your leather seats will acq uire a
r ich aged fin ish. This is a character istic of nat­
u ral leathe r and a s ign of true quali ty.
In order to maintain the value of this natural
product over the l ife of your veh icle, you
shou ld follow t he recomme ndat ions below:
IJJ,-
•
•

208 Cleaning and protection
-To keep your leather from bleaching out,
do not a llow it to be exposed to bright
sunlight for long periods of time. If you
have to leave the vehicle parked outside
for long periods, cover the leather to
protect it from direct exposure to sun­
li ght.
- Sharp objects on clothing, such as zip­ pers, rivets or sharp pieces on belts can
l eave pe rmanent scratches or scrape
marks on the surface of the leather.
@ Tips
-After each time you clean the leather and
at regular intervals, use a leather preser­
vat ive cream that contains UV-blockers
and that works into the leather. This
cream will nourish and moistur ize the
l eather, helping it to breathe and stay
supple. It also helps to build up a protec­
tive coating on the surface.
- Clean the leather every 2 -3 months,
and clean any areas that get soiled.
- Remove fresh marks made by ballpoint
pens, ink, lipst ick, shoe polish, etc . as
soon as possible.
- Preserve the color of the leather as need­
ed by using a special colored leather care
cream to touch up areas of uneven color.
Cleaning and caring for leather
upholstery and trim
App lies to vehicles: with nat ura l leather
Natural leather requires special care and at­
tention.
Normal cleaning
.. Clean soi led areas wit h a slightly moistened
cotton or woo len cloth.
More stubborn dirt
.. More stubborn dirt can be removed using a
cloth saturated with a mild soap so lution (2
tablespoons mi ld liquid soap) . ..
Never allow the soap solution to saturate
the leather, and make certain that no water
soaks into the seams.
.. Wipe off the soap so lution with a soft, dry
cloth.
Cleaning spots
.. Remove fresh water-based spots (such as
coffee, tea, juices, blood) with an absorbent
cloth or paper towel.
.. Remove fresh
grease or oil-based spots
(such as butter, mayonnaise, chocolate) with
an absorbent cloth or pape r towel, or use
the cleaner from the leather care k it if the
spot has not yet penetrated into the surface
of the leathe r.
.. Use an oil/grease dissolving spray, if
oil/
grease spots have dried on.
.. Remove specific kinds of spots (ballpoint
pen, fe lt marker, fingernai l polish, water­
based paint, shoe polish, etc.) with a spot
remover specifically formulated for leather.
Leather care
.. Every half year use an approved leather care
product (available from your authorized
Audi dea ler) to care for the leather .
.. App ly the product very spar ingly.
.. Wipe it off with a damp cloth.
If you have any questions about cleaning and
caring for the leather in your vehicle, it is best
to contact your authorized Audi dealer, who
will be glad to help you and tell you about our
full range of leather care products, such as :
- Leather cleaning and care kit
- Creams to care for colored leather
- Spot removers for ballpoint pens, shoe pol-
ish, etc .
- Oil/grease dissolving spray
- New and upcom ing products.
,&. WARNING
Always read and heed all WARNINGS and
other information
~page 200.

CD Note
-Never use chemical solvents (e.g . lighter
flu id, turpentine), waxes, shoe polish or
s imilar products on the leather surfaces
in your Audi.
- To avoid damage, have stubborn stains removed by a commerc ial cleaning spe­
cialist .
Cleaning Alcantara ® (synthetic suede)
App lies to vehicles: with Alcantara® upholstery
Rem oving dus t and dirt
.,. Moisten a cloth, squeeze out excess water
and wipe down the seat surfaces .
Rem ov ing sta in s
.,. Moisten a cloth with lukewarm water or
with diluted
e th yl (rubb ing ) a lcohol.
.,. Dab at the stain. Start at the outside and
work inwards .
.,. Once the stain is no longer visible, use a
soft dry cloth or t issue to soak up the mois­
tu re.
Do not use leather cleaning products on Al ­
cantara ®.
You may use a suitable shampoo for removing
dust and dirt. Dust and grit in the pores and seams can
scratch and damage the surface. If the car is
left standing in the sun for long periods, the
Alcantara ® should be protected against direct
sunlight to prevent it from fad ing . Slight color
variations will develop in normal use and are
not an indication of material deterioration.
CD Note
- Never use chemical solvents (e.g . lighter
flu id, turpentine), waxes, shoe polish or
s imilar products on Alcantara ® surfaces.
- To avoid damage, have stubborn stains
removed by a commerc ial cleaning spe­
cia list .
- Do not use brushes, st iff sponges or s im­
i larly abrasive cleaning aids .
Cleaning and protec tion
Safety belts
Only well-maintained safety belts work relia­
bly when needed .
.,. Keep belts clean.
.,. For cleaning, use a mild soap and water so l­
ution . Let belts dry thoroughly and away
from d irect sunlight .
.,. Do not allow inertia ree l safety belts to re­
tract befo re they are completely dry.
.,. Check the condition of your safety bel ts
reg­
ularly .
Heavi ly so iled safety be lts may not ret ra ct
properly.
A WARNING
-Damaged safety belts can break in a crash .
- Anyth ing that might damage yo ur safety
be lts could mea n that you and your pas­
sengers would not be adequate ly pro­
tected in an accident .
- Safety belt performance depends on cor­
rect insta llation. Never remove be lts
from the vehicle to clean them.
- Do not use chemical clean ing agents,
bleach or dyes. They have corrosive prop­
erties which wea ken the webbing.
- When clean ing you r safety be lts, inspect
them for damage . If you discover dam­
age, see yo ur authorized Audi dealer .
- Always read and heed a ll WARNINGS and
other information
¢ page 200.
Engine compartment
Be especially careful when cleaning the en­
gine compartment.
Alway s swit ch off th e ign ition befor e clean­
ing the engine
¢ ,&. .
Plenum panel
Remove leaves from the plenum panel in front
of the windshield under the eng ine hood . This
prevents t he wate r drain holes from becomi ng
blocked, and it p revents deb ris from enter ing
the ve hicl e interio r th ro ugh the heating and
ventilat ion duc ts . .,..
209
•
•

210 Cleaning and protec tio n
Cor ro sion pr ote cti on
The engine compa rtment and transmiss ion
hav e been corrosion-protect ed at th e factory.
Good ant i-corrosion t reatme nt is very impor­
tant, particularly in the winter. If the veh icle
is frequently driven on sa lt treated roads , the
enti re engin e compartment and pl enum panel
should be thoroughly cleaned at the end of
wint er and retreated to pr eve nt salt damag e.
At the same t ime, the underside of the vehicle
should be washed as well.
If the engine compartment is cleaned at any
t ime with gr eas e re moving solutions
1>, or if
you have the engine washed, the anti -corro­
sion treatmen t is almost always removed as
well. It is therefore essential to have a long­
lasting corrosion protection reapplied to all
surfaces, seams, joints and components in the
engine compartment .
_& WARNING
Be aware: The engine compartment of any
motor vehicle is a potentially ha zardous
area .
- Before working in the engine compart­
ment, be s ure to read the in formation
Q page 216.
-Before reaching into the front plenum
pane l, always remove the ignition key .
Otherw ise, the windshield wiper system
cou ld unintentionally be switched on,
poss ibly causing personal injury from the
moving wiper linkage.
- Never reach into the area around or
touch the radiator fan. The auxiliary fan is temperature controlled and can switch
on suddenly -even when the ignit ion is
off .
- Do not wash, wax or dry the engine w ith
the engine running . Moving or hot pa rts
cou ld injure you .
- Do not clean the underside of the chas­ sis, fenders , wheel covers, or other hard
1l Use only th e correct clean in g so lu ti on s. Ne ver use ga s­
o lin e or diesel fue l.
to reach parts without protecting your
hands and arms . You may cut yourself on
sharp-edged metal parts.
- Always read and heed all WARNINGS and
other information
Q page 200.

Detergent Gasoline, please go to the o fficia l
website (www.toptiergas .com) .
Afte r an ex tende d pe riod of using i na dequate
fue ls, built -up carbon deposits can rob you r
e ngine of peak pe rformance .
(D Note
Damage o r m alfunction due to poor fuel
qua lity is not cove re d by the Audi New Ve­
hicle Limited Warranty .
Fuel tank
Fuel filler neck
The fuel filler neck is located on the r ight rear
side panel beh ind the f uel filler flap.
If t he power locki ng system should fail, you
can st ill open the flap manually -for detailed
instr uctions
see <::;> page 215.
You can f ind the fuel tank capac ity of your ve­
h icle in
Technical Data r=;, page 271.
The label on the inside of the fuel filler flap
tells you the correct fuel for yo ur vehicle . For
more informat ion about fuel spec ificat ions,
see
r=;, page 211 .
Your vehicle fuel tank has an on-board refuel­
ling vapor recovery system . Th is feature he lps
to prevent fuel vapors from escaping from the
tank and polluting the enviro nment whi le you
refuel your ve hicle. In order to fill the tank
p rope rly whi le pro tect ing t he env ironment,
p lease follow t his refueling procedure car eful­
l y .
& WARNING
Under norm al oper ating co ndi tions, neve r
carry additional fuel containe rs in your car .
Gas canisters and other containers used to
transport fue l can be d angerous. Such con­
tainers, full or empty, may leak and co uld
cause a fire in a collision. If you must
transport fue l to use for yo ur lawn mowe r,
snow blower, etc., be very carefu l and al­
ways observe local and state laws regard­
ing the use, tra nspor tat io n and storage o f
Fuel suppl y and filli ng your fuel t ank 213
such fuel containe rs . M ake certa in the con­
tainer meets industry standa rds (ANSI/
ASTM F852 - 86).
(D Note
Neve r drive your vehicle until the fuel tank
i s completely empty. T he irreg ular s upply
of fue l can ca use m isfir ing. Gasoline cou ld
enter t he exhaust system and damage the
catalytic converter .
Refuelling
Fig. 1 63 Right rea r ve hicle s ide : Open ing t he fuel filler
flap
F ig . 164 Fu el f ille r fla p with attac hed fuel cap
>< "' a,
When act ivat ing the centra l locking, the fuel
filler flap is a utomatically unlocked o r locked .
Ref uel the vehicle wi th t he ignition turned
off.
Taking the fuel cap off
.,. Turn off the ignition.
.,. Press t he left side of the fuel f iller flap to
open it
r::> fig . 163 -arrow-.
.,. Unsc rew fue l cap counter-clockwise and
ha ng it on the fue l filler flap
r:::> fig. 164.

214 Fuel supply and filling your fuel tank
Refuelling procedure
.. Inse rt the fue l nozzle from the gasol ine
pump into the fue l filler neck as far as it will
go.
.. Select a m edium refu elling rate so that the
no zzle switches
off automatica lly when the
tank is full.
Putting the fuel cap back on
.. After filling your tank, twist the fuel cap
clockwise as far as it will go.
.. Close the fuel filler flap.
To avoid fuel spi lling or evaporating from the
fuel tank always close fuel cap properly and
comp letely.
A WARNING
Improper refueling or handling of fue l can
cause fire, explosion and severe burns.
- Fuel is highly f lammable and can cause
severe burns and other injuries.
- Failure to shut the engine
off while refu­
eling and/or to insert the pump nozzle
fully into the fuel filler neck could cause
fuel to spray out of filler neck or to over­
flow. Fuel spray and overflow ing fuel can
cause a fire .
- Never use a cellular telephone while re­
fueling . The electromagnetic radiation
can cause sparks that can ignite fue l va­
pors and cause a fire.
- Never get back into your vehicle while re­
fueling. If in exceptiona l circumstances
you must get back in your vehicle wh ile
refue ling, make certa in that you close
the door and touch metal to discharge
static electricity before touching the fill­
er nozzle again . Static electricity can
cause sparks that can ignite fuel vapors
released during refueling.
- Never smoke or have an open flame any­
where in or near your vehicle when refu­
eling or filling a portable fuel container.
- For your safety, we strongly recommend that you do not travel w ith a portable
fuel container in your vehicle. The con- tainer, fu
ll or empty may leak and could
cause a fire, especially in a crash .
- If, under exceptional circumstances, you
must transport a portab le fuel container,
please observe the following:
- Never fill a portable fuel container
wh ile it is anywhere in or on the vehicle
(for example, in the luggage compart­
ment, or on the trunk) . Static electrici­
ty can build up while filling and can ig­
nite fue l vapors causing a fire .
-Always place a portab le fue l container
on the ground before filling .
- Always keep the filler nozzle complete­
ly inside the portable container before
and during filling.
- If filling a portab le container made of
metal, the filler nozzle must always be
in contact with the container. This will
help prevent static electricity from dis­
charging and cause a fire.
- Never spill fuel inside the vehicle or luggage compartment . Fuel vapors are
highly flammable .
- Always observe local and state/provin­
c ial laws regarding the use, storage
and transportation of fuel containers .
- Make certain the fuel container meets
industry standards (ANSI/ ASTM
F852-86) .
(D Note
If any fuel has spi lled onto the car, it
should be removed immediately to prevent
damage to the paint.
@) For the sake of the environment
As soon as the correct ly operated nozzle
switches
off automat ically for the first
time, the tank is full. Do not try to add
more fuel because fuel may spill out . In
addition, the expansion space in the fuel
tank wi ll be filled -causing the fuel to
overflow when it becomes warm and pol­
lute the environment.