radio AUDI Q5 2013 Owners Manual

(!) Memory buttons (driver's seat)
@ Door handle
@ Power locking switch ........ .
© Side assist button ....... ... .
® A ir outlets .... .. ... ... .. .. .
@ Tu rn signa l and high beam . .. .
(j) Multifunction steering wheel
with:
- Horn
- Driver's airbag ............ .
- Audio/video, telephone, navi-
gation and vo ice recognition
buttons
- Rocker switches for tiptron ic
operation ................ .
@ ISETI button ... ..... ... ... . .
® Instrument cluster .......... .
@ Reset button for trip odometer .
@ Switches for:
- Windsh ield wiper/washer . .. .
- Trip computer ............ .
@ Ign ition lock ............... .
@ Adjustable steering column
€3J Control lever for:
- Cru ise contro l ........ .. .. .
- Adaptive cruise contro l .. .. .
@ Data Link Connector for On
Board Diagnostics (OBD II) . .. .
@ Release lever for the engine
hood .. .. .... ............. .
@ Instrument lighting .. ... .. .. .
@ Light switch ... .. ... ... .. .. .
@ Sw itch for un loc king the trunk
lid .... .. .. .... .. .... ... .. .
@ Adjuster control for outside mir-
63
42
116
80
52
16 1
127 11
10
1 3
54
23
83
83
95
107
26
233
51
49
43
rors . . . . . . . . . . . . . . . . . . . . . . . 57
@ Power wi ndow switches . . . . . . . 46
@ Radio system or Audi mu ltime-
d ia (see separate manual)
@ Radio or M MI display (see sepa­
rate manual)
@ Button/Indicator light for:
- Emergency flasher . . . . . . . . . 52
- PASSENGER AIR BAG OFF
Instrument s and control s 9
@) Glove compartment (lockab le)
@
@
Front passenger's airbag ..... .
Depend ing o n options:
- Audi drive select button
- Start -Stop-System button or
- 1.cl •I butto n (hybrid drive) ... .
- Par king system button ..... .
- Electron ic Stabilization Con-
trol (ESC) button .......... .
- Hill descent ass ist button ... .
@ Climate control .... ........ .
@ Shift lever for automatic trans-
mission . .. .. .. .... ........ .
@ Asht ray with ciga rette lighter
@ Coin storage
@ Depend ing on options:
- MMI cont ro l conso le or
- Park ing system button ..... .
- Electron ic Stabilization Con-
trol ( ESC) button .......... .
- Hill descent ass ist button ... .
- Aud i drive select button .... .
-Start-Stop-System button .. .
@) I S T ART ENGI NE STOPI button
§) Electromechanical parking brake
{!) Tips
76
161
120
91
100
129
197
199
79
123
75, 75
129
19 7
199
120
91
86
88
Some of the equipment or features shown
in the general illustration may be standa rd
equipment on yo ur vehicle or may be op­
tiona l equipment depending o n your mod­
e l. Always ask your authorized Audi dealer
i f you have a quest ion about your vehicle.

12 Instruments and warning/indicator lights
button. You can perform an Auto-Check se­
quence when the vehicle is stationary and the
ignition is turned on or when the vehicle is
moving s lower than 3 mph (5 km/h).
The number of keys programmed to the vehi­
cle is also displayed. The disp lay
L2 3/3 indi­
cates that three keys have been programmed.
This allows you to make sure you have re­
ceived all of the keys when you purchase a
used vehicle .
For examp le, if you on ly receive two keys, you
should take those keys to your authori zed
Audi dealer to have the missing key deactivat­
ed so it cannot be used . You should also re ­
port the m issing key to your insurance compa­
ny.
Calling up the driver information
A yellow or red symbol appears in the instru­
ment cluster display, usually with a driver
message . The driver message display disap ­
pears after about
5 seconds. The driver mes­
sage can be displayed aga in by briefly press­
ing the
! SET i button.
Setting the speed warning
By pressing the I SETI button briefly, you can
set threshold 1 of the speed warning while
you are dr iv ing
c:> page 94 . By ma inta in ing
p ressu re on the
ISETI button, you de lete the
warn ing threshold.
Digital clock with date display
Fig . 5 Instrument cl uste r: t im e an d date
M N
9 a:
l:l
Depending on the vehicle equipment level,
you may choose between the quartz clock or the GPS contro lled clock*
(!i in the radio or in the
MMI*. You can learn more about this in
the MMI manual or in the radio user's manual.
(D Tips
-When you switch off the ignition or open
the drive r door, the time, date, odome­
ter and temperature are displayed for an
add itiona l
30 seconds .
- Yo u can also call up the display with the
!SET i button r=> page 11 wh ile the igni­
tion is switched off.
Fuel gauge
The fuel gauge works only when the ignition is
on.
When the needle reaches the reserve mark,
the
c:> page 33 1] symbol appears in the in­
strument cluster d isplay as well as the mes­
sage
Please refuel. This message is meant to
remind you to
refuel.
The total tank capacity of your vehicle is listed
in
r=> page 292.
(D Note
Never run the tank completely dry! An ir­
regular supply of f uel can cause engine
misfiring and fuel could enter into the ex­
haust system. The catalytic converter
could then overheat and be damaged .

Instrument s and warning /indicator lights 13
Odometer
The odometer indicates the distance driven.
Fig. 6 Instrument cluster: odometer
Fig. 7 Instr ument cluster: reset button
The display of distance driven is shown in kilo­
meters "km" or in "m iles".
- USA models -Miles
- Canada models -Kilometers
You can switch from kilometers to miles or
vise versa in the radio or in the MMI*. You can learn more about this in the MM
I manual or in
the radio user 's manual.
Odometer /trip odometer
T he odometer shows the total number of kilo­
meters or m iles that have been driven on the
vehicle.
The trip odometer shows the distance driven s ince it was last reset.
It can be used to meas­
ure short distances . The last digit shows dis­
tances of 100 meters or 1/10 of a mile.
The trip odometer can be reset to zero by pressing the reset button
10 .019 fig. 7.
Malfunction message
If there is a malfunction somewhere in the in­
strument cluster,
dEF will appear in the trip
odometer and w ill stay on. Contact your au­
thorized Audi dea ler to have the prob lem cor­
rected.
{t) Tips
- When you switch off the ignition or open
the driver door, the time, date, odome­
t er and temperature are displayed for an
additional 30 seconds.
- You can also call up the display with the
!SET ! button ~ page 11 while the igni­
tion is switched off.

20 Driver information display
Driver information
display
Introduction
General notes
The driver information display inside the in­
strument cluster provides you, the driver,
with much useful information.
Fig. 9 Instrument cluster: center display
Information from the driver information sys­
tem is shown in the display in the center of
the instrument cluster.
When you turn on the ignition and while you
are driving, some functions and vehicle com­
ponents are scanned for their operat ing sta­
tus. Malfunctions or required service proce­
dures are signaled audibly and shown by red
and yellow lighted symbols and reminders to
the driver in the display.
The driver is also shown information about ra­
dio and CD operation and directions for the
navigation system*. You can find additional
information on these subjects in the radio or
MMI* manual.
The illustr ations in the instrument panel dis­
play differ in some of the vehicles .
The driver information system provides the
following functions:
Sound system display
¢page20
Outside air temperature r:::;, page 21
Digital speedometer r:::;, page 21
Open door- and luggage com-llr:::;, page 21
partment warning
Service interval display
¢page 22 r:::;,page
27
Driver information r:::;,page 27
Speed warning r:::;,page93
Trip computer r:::;, page 23
Tire pressure monitoring sys-r:::;, page 266 1
tern*
Digital clock with date dis play
r:::;, page 12
Odometer and trip odometer ¢page 13
Selector lever position r:::;, page 123
¢page95
Adaptive cruise control* Energy flow display* ¢page 107
---,.--
r:=;,page 103
¢j) Tips
In the event of a malfunction either a red
or yellow icon appears in the display. Red
symbols indicate
Danger r:::;, page 28. Yel­
low symbols indicate a
Warning
¢page 31.
Sound system display
Fig. 10 Display: sound system
(0
"' .... 9 a:
~
If priority 1 or priority 2 faults are not shown
by the Auto Check Control, the name of the ra­
dio station you are tuned to or the frequency
and the reception range are shown in the up­
per area of the displ ay.
When the CD is in use , the title of the track
being played is shown. The CD changer dis­
plays the number of the current CD (CD
1 to
CD6).

Outside temperature display
Fig. 11 D isplay : outside te mpe rature
At temperatures below 39 °F (+4 °C), a snow­
f lake symbol appears in front of the tempera­
ture display . It is intended to rem ind the driv ­
er to pay special attent ion to
ice on the roa d.
If the vehicle is stationary, or if you are driving
at a very low speed, the temperature shown in
the display might be slightly higher than the
actual outside temperature . Th is is caused by
the heat being radiated from the engine .
The unit of measurement for the temperature
can be set in either °For in °Con the MMI* or
on the radio control un it . The outside temper­
ature display automatical ly shows the unit of
measurement that has been set. For addition­
a l information, see the MMI* or the radio in ­
struction manua l.
A WARNING
- Never use the outside temperature d is ­
play to determine if a road surface is icy
or not. Keep in mind that road surfaces ,
especially bridges and overpasses, could be ice covered and slippery even at an
outside temperature above 39 °F (+4 °C).
- Always remember, eve n if the "snow­
flake" symbol ( ice warn ing) does not ap­
pear i n the display, black ice could be on
the road .
-Always reduce your speed and dr ive with
special care in cold weather conditions
when the chance of encounte ring icy
road surfaces increases .
Driver inform ation di spl ay 21
Digital speedometer
Fig. 12 D ispl ay : D ig it a l speedometer
Current speed appears in the disp lay. Speed is
shown in 1 mph increments (USA mode ls) or 1
km/h increments (Canada models) .
You can switch the disp lay from mi les to kilo ­
meters and vice versa via the radio or MMI* .
Open door or trunk lid warning
The pictogram alerts you when doors or the
trunk lid have been left open .
Fig. 1 3 Disp lay: Open doo r· and tr unk lid wa rnin g
T he Open Door/Trunk L id warn ing displays if
even one door, the hood or the t runk lid is
open . T his symbo l also shows which door or
lid has no t been closed
~ fig. 13 .
As soon as the doo r, the hood and the trunk
lid a re closed proper ly, the door and trunk lid
warning turns off and the selected d river in­
format ion sys tem func tion s are d isplayed
again .

22 Driver information display
Service interval display
The service interval display reminds you when
your next service is due .
Fig. 14 Instrument cluster: Service interva l d isplay
The schedule for the next oil change or inspec­
tion is calculated automatically and displayed
according ly . The display works in two stages:
Service reminder
30 days before the next service is due, a serv­
i ce reminder appears in the display when you
turn on the ignition
C? fig. 14.
Afte r about 5 seconds the display sw itches
back to normal. The distance and time re­
maining are updated each time the ignition is
turned on until the date due for service is
reached.
Service due
When the due date for service is reached, the
message
Service due! appears in the instru­
ment cluster immediately after you turn on
the ignition. Additionally, a warn ing tone
sounds. After about 5 seconds the display
switches back to normal.
Calling up the service schedules
If or when an oil change or inspect ion is due,
can be shown in the radio or MMI* display by
selecting the serv ice interval display in the car
menu. Select
ICARI function button > Service
interval display
or I CARI function button > Car
systems*
contro l button > Servicing & checks
> Service intervals . Resetting the service interval display
Your a
uthorized Audi dea ler will reset the cor­
responding se rvice schedule after performing
the appropriate service on your vehicle. You
also have the possibility to reset the oil
c h ange schedule after having performed an
o il change according to Audi specifications.
Select
I CAR ! funct ion button > Service interval
display
> Reset oil change interval or I CAR I
function button > Car systems* cont rol but­
ton
> Servicing & checks > Service intervals >
Reset oil change interval.
(D Note
If you disconnect the battery terminals, no
calculations can be made for the service
int erva l display during this time and no
serv ice reminder will appear. Remember
that observing the proper serv ice intervals
is vitally important to extending the life of
your vehicle, particularly the engine, and
maintaining its value. Do not exceed the
time interval for the next service, even if
the veh icle m ileage is low.
(D Tips
- Do not reset the display between oil
changes, otherwise the display will be in­
correct .
- The information in the Service Reminder
remains stored even when the vehicle
battery is disconnected .

24 Driver in formation d isplay
nozzle ii indicates the efficiency program*
¢page 25.
Single-t rip memory (Trip computer 1 )
The single-t rip memo ry sto res the trip infor­
mat ion from the time the ignition is turned o n
until it is tu rned off . If the trip is contin ued
w ithin 2 hours from the time the ignition was
turned off, the new data will be included in
the calcu lation of the current trip informa ­
tion. If the trip is interrupted for
more than 2
hour s
the memory is reset automatically.
Total -tr ip m emory (Trip compu ter 2 )
Unlike the sing le-trip memory, the tota l-trip
memory is not reset automatically. This per­
mits you to evaluate your driving data for the
entire period between manual resets.
Effici ency prog ram*
The efficiency p rogram can help yo u to use
l ess fuel ¢
page 25 .
Operation
The trip computer is controlled by two
switches on the windshield wiper lever.
~
--- ®
Fig. 17 Windshie ld wipe r leve r: controls fo r th e trip
co mp ute r
.,. To d isp lay the trip computer memory leve ls ,
press the
I RESE T I button ®¢ fig. 17 re­
peatedly unt il the desired memory leve l is
shown in the d isp lay .
... To disp lay trip information within a memory
level, press the top or bottom part of the
function selection switch
@ .
The trip computer w ill not operate unless the
ignition is on. When you turn on the ignition, the function that was in use when you last
turned the ignition off wi
ll be displayed .
In add ition to info rm ation on the trip comput ­
er (trip computer 1, 2 and eff ic iency p ro­
gram*, the d igital speedometer and informa­
tion regarding the navigation system * can a l­
so be displayed. To switch the d isp lay between
the d ifferent informat ion, tap the
I RESE T I but­
ton ® briefly.
Sett ing values to ze ro
To de lete one current va lue from the trip com ­
puter, se lect the desired functio n and press
the
I RESET I button ® for at least one second.
The following values can be set to zero
indi ­
v iduall y:
-Average fue l mi leage
- Average speed
- Elapsed t ime
- Distance
All currently d isplayed va lues are deleted in
the efficie ncy program*.
In add ition,
all the values in the sing le-trip or
the total-tr ip memory can be de leted sim ulta­
neously ¢
page 24.
(!) Tips
All stored va lues w ill be lost if the veh icle
battery is disconnected.
Basic Settings for the trip computer
The MMI* or the radio operating unit is used
for setting the trip computer's basic settings.
.,. Select: !CAR ! function b utton > In strument
cluster > On-board computer
1 or On-board
computer
2 .
The values in the sing le -tr ip or the total-t rip
memory can all be reset to zero at the same
time under
Reset in the menu .
In add ition, yo u can de termi ne wha t informa­
tion from the t rip computer should be shown
in the instrument cluster disp lay . If one of the
pieces of driver information is turned
Off , that
drive r information will not be shown in the ..,.

@ Tips
-The operation of the remote contro l key
can be temporarily disrupted by interfer­
ence from transmitters in the vicinity of
the veh icle work ing in the same frequen­
cy range (e .g . a cell phone, radio equip ­
ment) .
- If you open the dr iver's door with the key
left in the ign ition lock, a chime will
sound . This is your reminder to remove
the key and lock the door .
- For security reasons , replacement keys
are only available from Aud i dea lers .
- For Decla rat ion of Compliance to United
States FCC and Industry Canada regula­
tions
c::;, page 298 .
Check light and battery in the master
key
Fig. 26 Remote master key
Check light in the master key
"' 0 N ,;, (0 a:,
The check light@¢ fig. 26 in the master key
prov ides information about different cond i­
tions.
.. The check light comes on briefly once when
a button is pressed, and during an "inquiry"
by the conven ience key system .
.. If the check light does not come on, the
battery is dead and has to be replaced. I n
addition, when the battery is dead the
!I
symbol appears in the instrument cluster
display as well as the message:
Please
change key battery.
Master key battery replacement
.. Pull the mechanical key out of the master
key
¢ page 37.
Opening and closing 3 7
.. Press the release button @ c::;, fig. 26 on the
battery holder and at the same time pull the
battery holder out of the master key in the
direction of the arrow.
.. Install the new battery CR 2032 with the
"+" sign facing down.
.. Push the battery holder carefully into the
master key.
.. Install the mechanica l key.
@) For the sake of the environment
Dispose of dead batteries prope rly so as
not to pollute the environment.
(j) Tips
The replacement battery must be the
same specification as the origina l.
Removing the mechanical key
Fig. 27 Remote maste r key : Removing the mec han ical
key
.. Press the release button@¢ fig. 27.
.. Pull the mechanical key@ out of the mas­
ter key.
Using the mechanical key, you can:
- lock and unlock the glove compartment
c::;, page 76 .
-lock and unlock the vehicle manually
c::;, page 41 if this should not be possible
w it h the master key .

38 Openin g and clo sing
Emergency unlocking of the ignition key
In the event of malfunc tions in the electrical
system, it may happen that you cannot re­
move the ignition key.
Fi g. 28 Ig nit io n swi tc h with igni tio n key
If you are unable to remove the ignit ion key,
for example because the vehicle battery is dis­
charg ed, proceed as follows :
• Press the release button @
c::> fig. 28 and
pull the mechanical key ® out of the master
key .
• Lock the vehicle using th e m echanical key
c::> page 41.
• Have the elect ric al system inspected by an
au thor ized Audi dealership .
Electronic immobilizer
The immobilizer helps to prevent unauthor­
ized use of your vehicle.
Inside th e key th ere is a compute r chip . This
chip automatically deactiv ates the elect roni c
immobili zer when you insert the key in the ig­
n ition lock. When you remove the key from
the ign ition lock, the e lectronic immob ilizer is
automatically activated once again .
@ Tips
-The vehicle cannot be started if an unau­
thorized key is used . The vehicle may not
start if another radio device such as a key
fo r another vehicle o r a tra nsponder is
l oca ted on the key ring .
- For Decla rat ion of Compliance to United
States FCC and Indus try Canada regula­
tions
c::> page 298.
Power locking system
General description
The power locking system locks or unlocks all
doors and the rear lid simultaneously .
You can lock and unlock the vehicle cen trally .
You have the following choices :
- Remote master key
c::> page 40
-Door hand les with Convenience key *
c::>page40,
- Lock cylinder at the driver 's doo r
c::>page 41, or
- Powe r locking switch inside
c::> page 42.
Selective unlocking
When you lock the vehicle, the power locki ng
system will lock the doo rs and the rear l id .
When unloc king, you can set in the radio or in
t h e MMI* whethe r
only the dr iver's door or
t h e enti re veh icle should be unlocked
c::> page 3 9.
Automat ic lock ing
The automatic locking feature locks a ll the ve­
hicle doors and the rear li d w hen you dr ive
f as ter than 9 mph (15 km/ h).
The car is unlocked again once the ign ition key
is removed . In add ition, the vehicle ca n be un­
locked if the open ing fun ct ion in the power
locki ng sy stem switch or at one of the door
levers is actua ted .
Additionally , in the event of a crash with air­
bag deployment the doo rs a re automatically
u nlocked to allow access to the vehicle.
Anti-theft alarm warning system
If the anti -theft ala rm warn ing system de ­
tects a b reak-in in to the vehicle, acoustic and
visual war ning s ignals are tr iggered .
The anti-theft warning system is activated au­
tomat ically when you lock t he vehicle . It is de ­
activated when unlocki ng using the
remote
key , with the mechanical key , and when you
swit ch on the ignition .
IJII,

The alarm also turns off when the alarm cycle
has expired.
Turn signals
When you unlock the vehicle, the turn signals
flash twice. When you lock the vehicle , the
turn signals flash once. If they do not flash,
one of the doors, the rear lid or the hood is
not locked.
Unintentionally locking yourself out
In the following cases there safeguards to
prevent you locking your remote master key in
the vehicle:
- The vehicle does not lock with the power
locking switch
¢ page 42 if the driver's
door is open.
- On vehicles with Convenience key* , if the
most recently used master key is in the lug­
gage compartment, the rear lid is automati­
cally unlocked again after it is closed.
Do not lock your vehicle with the
remote mas­
ter key
or Convenience key* until all doors
and the rear lid are closed. In this way you
avoid locking yourself out accidentally.
A WARNING
- When you leave the vehicle, always re­
move the ignition key and take it with
you. This will prevent passengers (chil­
dren, for example) from accidentally be­
ing locked in the vehicle should they acci­
dentally press the power locking switch
in the front doors .
- Do not leave children inside the vehicle
unsupervised . In an emergency it would
be impossible to open the doors from
the outside without the key.
@ Tips
- In the event of a crash with airbag de ­
ployment all locked doors will be auto­
matically unlocked to give access to the
vehicle occupants from the outside .
-If the power locking system should mal­
function, you can lock the driver's door
using the mechanical key
¢ page 42.
-
Opening and closing 39
- If the power locking system should fail,
you can still open the fuel tank flap in an
emergency
¢ page 232.
- You are well advised not to keep valua­
bles inside an unattended vehicle, visible
or not. Even a properly locked vehicle
cannot provide the security of a safe.
- If the LED in the upper edge of the driv­
er's door panel comes on for about 30
seconds after the vehicle is locked, there
is a malfunction in the power locking or
the anti-theft warning system . Have the
malfunction corrected by an authorized
Audi dealership or qualified repair facili­
ty.
Setting power locking
The driver can determine the functions for
power locking in the radio or in the
MM!*.
.,. Select: I CAR ! function button > Central lock­
ing .
Or
.,. Select:
,.., I c=- A,...., Rc-, 1 function button > Car sys-
tems* control button > Vehicle settings >
(Central locking)* .
Unlocking single door/Unlock doors -
you can
specify which doors unlock when you open the
vehicle.
- Selecting
Off/All and pressing the [®] button
on the remote control key unlocks the entire
vehicle.
- Selecting
On/Driver and pressing the~ but­
ton on the remote control key once unlocks
only the driver's door. In vehicles with a con­
venience key*, only the door whose handle
you pull will unlock. If you press the
Iii but­
ton twice, the entire vehicle will unlock. If
you press the~ button, the entire vehicle
will always lock .
Trunk lid/tailgate/Lock exterior trunk handle
-if you select On , the rear lid handle locks
¢ page 43, fig. 35 . In this case, the rear lid
can be opened with the
1£1 button on the mas­
ter key
¢ page 40, fig. 29 or with the 1£1
button in the driver's door ¢ page 43,
fig. 34.