ESP AUDI S8 2009 Owner's Manual

Opening and closing
- To swit ch on the child safe ty lock, turn the ignition key in
the direction of the ar row.
- To
switch off the child safety lock, turn the ignition key in
the opposite d irection to the arrow.
The child safety lock prevents the doors from being opened from the
inside when you have smal l children sitting in the rear. •
Applies t o vehicl es : w it h power c hild s afety lock i n the rea r doo rs
Power child safety lock for the rear doors t
The power child safety lo ck prevents the rear doors from
being o pene d from the inside.
Fi g. 45 Section from
dr ive r's do or: con trols
T he rear doors are equippe d with a power child sa fe ty lock .
It is operated w ith the two safety buttons(!) in the driver 's
doo r~ fig. 45 .
Press the left an d/or rig ht safety button to d isable t he
rear powe r window(s) and prevent the respective rear
door from being o pened from the inside . The LED in the
button wil l light up when the child safety lock is turned
on .
- Pr ess the il lumina ted butt on aga in to t urn the child
safety feat ures
off .
When the ch ild safety lock is activated, the interior door opening
lever is inoperative; the door can only be opened from th e outside.
I n addi tion, the wi ndow regu lator for that door is a ls o inoperative
when the child safe ty lock is activated .
I f the ch ild safety lock has been act ivated on both the left
a nd right
side , then the fol lowing features are swi tched off: the buttons for
the interio r lights, the sun b lind * in the rear window and the buttons
f or the power sun blinds* in the s ide windows. In addition to this ,
the rear cl imate control* is set to the PASSIVE mode. T his means
that the cl imate co ntrols in the front adjust the hea ting and ventila­
tion in the rear of the vehicle~
page 125 .
[ i ] Tip s
• In order to activate the child safety lock on the left and the right
side, you have to press the two safety bu ttons in succession.
• Make certain that the indicator light in the corresponding safety
bu tton illuminates when the child safety lock is activated .•
Convenience key
Ap plies t o ve hicles : with C onv eni enc e ke y
Description
Opening your vehicle and starting the engine with the key
still i n yo ur pocket.
The Convenience key features is a keyless system which gives you
the possibility to lock and un lock your veh ic le , as well as to start the
engine without having to use your key.
It does not matter if you have your key in your jacket pocket or in
your briefcase . As soon as you get w ithin a cer tain distance to the ..,_

vehicle, the system senses that your are approaching, it makes a
quick check to see if you are "authori zed" and then i t does the
following :
• unlocks the vehicle ~
page 59 .
• locks the vehicle~ page 60.
• switches on the ignition and starts the engine when y ou press
the [ START] button . You do not have to insert your key into the igni ­
t ion lock ~
page 131.
& WARNING
• When you lock your vehi cle from out side , nobody -especially
c hildr en -sh ould rem ain in side the vehi cle . Rem emb er, w hen you
lock the vehicle fr om the outside the window s cannot be opened
from the in side .
• When you leave the vehicle , alwa ys remove the ignition key and
t a ke it wi th yo u. Thi s w ill prevent pa ss engers (children , for
example ) fro m acciden tally bein g locked in the vehicle should they
ac cid entally pr ess the p ower lock ing switch in the doo rs.
• Do not leave children in side the vehicl e un sup ervised. In an
eme rg ency it would be i mpo ssible to ope n th e door s from th e
o ut side wi thout the ke y.
[ i ) Tips
• For the Convenience key to properly work, you must always have
your vehic le key with you .
• The vehicle will lock or unlock the doors only if an authorized key
comes within 5 ft 11.5 meters) from one of the vehicle doors or the
rear lid.
• You can still lock or unlock your vehic le using the remote control
key buttons, however the se lector lever must in the P position .
• For Declaration of Compliance to United States FCC and Industry
Canada regulations ~
page 385. •
Controls and equip ­
ment
Opening and clo sing
Ap plies to veh ic les : wi th C onve nie nce ke y
Unlocking the vehicle
Y ou can unlock the doors and rear lid without using the
remote control .
Fig . 4 6 Convenien ce
k ey: U nlo ck in g a door
- Grab the door hand le . The door automat ica lly un locks.
P ull the doo r handle to o pen the doo r.
A door will unlock as you approach a door handle and the system
senses that you have an authorized key . This applies to each door on
t he vehicle . The authorized key on ly has to be within a range of
about 5 feet 11 .5 meters) from the respective door .
Whenever you un lock a door, the driver's door a lso un locks . Yo u can
set the power lock system using the me nu in the
MMI system, for
examp le, if you want to unlock just one specific door , or all the
veh ic le doors
~ page 52 .
[ i ) Tips
If you r vehic le has been standing f or an extended pe riod, p lease
note the following:
• To conserve battery power, the sensor will turn off after a few
days. When you come back, you will have to pull on the door hand le
once to un lock the door and then a second time to open the door .
~
I • •

Opening and closing
• Again, to conserve battery power so that you can start the
vehicle after it has been standing for a long period, the vehicle's
energy management system will switch off any convenience
features not necessary. You will not be able to unlock your vehicle
using the keyless system. •
Applies to vehicles: wi th Conven ience key
Locking the vehicle
You can lock the doors and rear lid without using the
remote control.
Move the selector lever into P.
Fig. 47 Convenience
key: locking the
vehicle
- Press the lock button in the door handle to lock the
vehicle ~& .
You can lock each door on the vehicle. Remember, an authorized key
must be within 5 ft (1.5 meters) of the door.
The selector lever must be in the P position, otherwise the vehicle
will not lock.
& WARNING
• When you lock your vehicle from outside, nobody -especially
children -should remain inside the vehicle. Remember, when you
& WARNING (continued)
lock the vehicle from the outside the windows cannot be opened
from the inside.
• When you leave the vehicle, always remove the ignition key and
take it with you. This will prevent passengers (children, for example) from accidentally being locked in the vehicle should they
accidentally press the power locking switch in the doors.
• Do not leave children inside the vehicle unsupervised. In an
emergency it would be impossible to open the doors from the
outside without the key.
[ i] Tips
It is not possible to open the door immediately after it has been
locked. This is intentional to allow you to check proper locking of all
vehicle doors .•
Anti-theft alarm system
The anti-theft alarm triggers an alarm if anyone attempts
to break into the vehicle.
The anti-theft alarm system triggers an audible alarm and turns on
the emergency flasher if an unauthorized interference with the
vehicle is sensed by the system .
How is the anti-theft alarm system switched on?
The anti-theft alarm system is switched on when you lock the
vehicle. The system is activated approximately 30 seconds after the
vehicle is locked . The indicator lights on top of the driver's and front
passenger's door trim start flashing rapidly for 30 seconds and then
blink slowly. ._

Opening and closing
Switches for front door windows
@ operates the window in the driver's door.
@ operates the window in the front passenger's door.
Switches for rear windows
© operates the left rear window.
@ operates the right rear window .
Safety switch
© Safety switch for rear window operation.
& WARNING
• Do not leave children unattended in the vehicle, especially with
access to vehicle keys. Unsupervised use of the keys can result in
starting of the engine and use of vehicle systems such as power
windows, etc. which could result in serious injury.
• Remember -you can still open or close the power windows for
about ten minutes after the ignition is switched off. Only when
either of the front doors are opened are the power windows
switched off.
• Be careful when closing the windows. Check to see that no one
is in the way, or serious injury could result!
• Always remove the ignition key whenever you leave your
vehicle.
• If you lock your vehicle from the outside, no one, especially chil­
dren, should remain in the vehicle.
• Do not stick anything on the windows or the windshield that
may interfere with the driver's field of vision.
[ i] Tips
• In addition to the switches in the driver's door there is a separate
switch in each door for the power window in that door=>
page 63,
fig.
50 .
• The driver can lower or raise the power side blinds * in the side
windows by using switches © and
@. •
Switches in the driver's door
The driver can operate all windows.
If the respective switch is pushed or pulled the window will
open or close. The power window switches have a
two-posi­
tion function:
Opening the windows
- Push the switch to the first stop and hold it there until the
window has lowered to the desired position.
- Push the switch briefly to the
second stop: the window
will automatically open all the way.
Closing the windows
-Pull the switch up to the first stop and hold it there until
the window has risen to the desired position.
- Pull the switch quickly to the
second position: the
window will automatically close all the way=>
& in
"Controls" on
page 61.
Activating/deactivating rear windows
- Push the switch ®=> page 61, fig. 48 to the depressed
position to activate the rear windows - the light in the
switch will go out.
- Briefly press the switch ® to
deactivate the rear
windows - the switch will return to the safety position
and the light
I will illuminate.

Opening and closing
-In position @, briefly press the control to tilt the roof up
completely.
- To tilt the roof open to any intermediate position press
and hold the switch until the roof reaches the desired
position.
Sliding the roof open
- Turn the switch to position (D to open the roof all the
way.
- Turn the switch to any other position to open the roof to
any intermediate position.
When the glass roof opens, the sun visor, which is designed to ward
off strong sunlight, opens along with it. The visor can be closed
manually when the sunroof is closed.
[ i J Tips
• Be aware that the sunroof may actually be open when the sun
visor is closed. Check and make sure that the sunroof is shut when
parking the car or if it suddenly starts raining.
• If the sunroof is not fully closed but you have pressed and held
the switch for the tilt position, the sunroof will not tilt. •
Closing the power sunroof
Sliding the roof shut
- Turn the rotary switch to position®=> page 65, fig. 53
=> & .
Tilting the roof shut
-Briefly pull the rotary switch to close the roof. -
To tilt the roof down to any intermediate position pull and
hold the switch until the roof reaches the desired posi­
tion.
& WARNING
Improper use of the power sunroof can cause serious personal
injury.
• Be careful when closing the power sunroof. Not paying atten­
tion could cause you or others to be trapped and injured as the
roof closes.
• Always take the key with you when you leave the vehicle to
prevent injuries caused by the roof closing.
• Never leave children or persons requiring assistance alone in
the vehicle, especially when they could access the vehicle keys. Unsupervised use of the keys can result in the engine being
started or use of vehicle systems such as the power windows, etc.
which could result in serious injury. The doors could be locked
with the remote key, delaying help in an emergency.
• The power sunroof will continue to operate until the ignition
key has been removed and one of the front doors has been
opened. •
Power emergency closing
The sunroof can still be closed electrically if for some
reason the overload protection function becomes acti­
vated.
The power sunroof is equipped with an overload protection
feature. If, under normal conditions, the power sunroof will
not close, you can close it using this feature.
- Turn the rotary switch to position ®=>page 65, fig. 53 . .,_

- Now pull the switch and hold it in this position until the
power sunroof closes completely.
& WARNING
Improper use of the power sunroof can cause serious personal
injury.
• Be careful when closing the power sunroof. Not paying atten ­
tion could cause you or others to be trapped and injured as the
roof closes.
• Always take the key with you when you leave the vehicle to
prevent injuries caused by the roof closing
• Never leave children or persons requiring assistance alone in
the vehicle, especially when they could access the vehicle keys. Unsupervised use of the keys can result in the engine being
started or use of vehicle systems such as the power windows, etc.
which could result in serious injury. The doors could be locked
with the remote key, delaying help in an emergency.
• The power sunroof will continue to operate until the ignition
key has been removed and one of the front doors has been
opened. •
Con tro ls and eq uip­
ment
Opening and closing
Emergency closing by hand
The sunroof can be closed by hand in case of a power
failure.
Removing the cover
Fig . 54 Section from
headliner: Where to
place the screwdriver
Fig . 55 Section from
headliner: Crank for
emergency operation
Insert the flat side of the screwdriver (found in the
vehicle tool kit) at the rear edge of the lens as indicated
by the -arrows- :::;, fig. 54.
Carefully pry the clear lens cover open and remove it. .,...
Vehicle care I I irechnical data

Clear vision
Lights
Switching the headlights on and off ·'t!-·
In the "AUTO " position, a light sensor automatically
s w itches t he head- and tailligh ts on and off in response to
l ight con ditio ns.
Fig . 56 Instrument
p an el: light switch
Switching on automatic headlight control
- T urn th e lig ht switch to AUTO => fig. 56 .
Switching on the side marker lights
- T urn the light switch to ~oo~.
Switching on the headlights and high beam
- T urn th e li ght swit ch to fD.
- Pu sh the high beam leve r forw ard towa rds t he instru -
m ent panel
=> page 73 .
Switching off the lights
- T urn t he light switch to 0 .
Con tro ls and eq uip­
ment
Clear vision
The headlights only work when the ignition is switched on . While
starting the engine or when switching off the ignition, the head ­
lights will go off and only the side marker lights will be on.
After starting the engine, the xenon headlights are automa tically
adjus ted to the load and a ngle of the vehic le (for example, during
acceleration , braking) . This prevents oncoming traffic from exper i­
encing unnecessary headl ig ht g la re from your xenon head ligh ts .
If the system is not operating properly, a warning symbol in the
Auto -Check Contro l is displayed => page
36.
With the side marke r lights or head ligh ts switched on, the sym bol
next to the light switch illuminates
:oo:.
Daytime running lights
• USA models : The daytime running lights wi ll come on automati­
ca lly when the ig nition is turned on and the ligh t swi tch => fig. 56 is
in the
O position or the AUTO position (only in daylight conditions).
The
Daytime running lights func tio n can be tur ned on and off in the
MMI menu
E xterior lighting => page 70 => & .
• Canada models: The dayti me ru nn ing lights wi ll come on au to ­
matically when the ignition is turned on and the light switch
=> fig. 56 is i n the
O po sitio n or the AUTO po siti on (only in dayligh t
condi tions) => & .
Automatic headligh t control
In the switch posi tion AUTO the automatic headlight cont ro l is
t urned on . The low beams are turned on automa tica lly through a
light sensor as soon as ambient brightness (e .g . when driving into a
t unnel) fa lls below a value preset at the factory . When ambient
brightness increases again, the low beams are turned off again
aut omatically =>& .
I n the
AUTO posit io n the low beams are switched off automatically
when the ignition is turned off. If the high beams were switched on,
they w ill come o n again the ne xt time the a utomatic head ligh t
~
Vehicle care I I irechnical data

Clear vision
control is activated. The high beam function must first be switched
on in the MMI
=> page 70 .
Light Se nsor M alfu nction
In the event of a ligh t sensor mal funct ion, the driver is notified in the
instrument cluster display:
~ Autom atic headlights /aut om atic wipers defe ctive
For safety reasons the low beams are turned on permanently wit h
the switch in
AUTO . However, you can continue to turn the lights on
and off using the light switch . Have the light sensor checked as soon
as possible at a dealership.
& WARNING
• Never use d aytime running lights to see where you are going .
The y are not bright enough and will not let you see f ar enoug h
ahead for s afet y, espe cially at du sk or when it is dark. Alw ays
switch on the low beams at du sk or when i t is dark .
• Autom ati c he adli ght s are onl y intended to as sist the dr iver .
The y do not relie ve the d riv er of his re spon sib ility to che ck the
he adlights and to turn them on manuall y according to t he current
ligh t and vi sibility conditions . For example , fog and ra in cannot be
dete cted by the light sen sor s. S o alw ays switch on the he adlights
under these weather con dition s and when dr iving in the dark
gD .
• Cras hes ca n happen when you c annot s ee the ro ad ahe ad and
when you cannot be seen by other motor ists .
- Alw ays turn on the headlight s so that you can see ahe ad and
s o that others can se e your c ar from th e ba ck.
[ i J Tips
• With the switch in AUTO front fog lights and rear fog lights
cannot be turned on in addition. • I
f you remove the ignition from the ignition lock while the head­
l ights are s till on, a bu zzer w ill sound as long as the driver's door is
open to remind you to turn off the l ights .
• Always observe the specific local regulations for your area as to
when to use your lights. •
Adjusting exterior lighting
The functions are set in the MM/.
Press the I CAR] function button.
- Select
Systems in the CA R menu.
Fig. 57 MM I dis pla y:
E xt eri or ligh ting
- Sele ct Exterior lighting. The menu Exterior lighting
appears => fig . 57.
C oming h ome
The Coming home function ensures that after tu rni ng off the igni ­
tion and open ing the driv er's d oor
the vehicle periphery is illum i­
nated in the dark . In addition, the front fog lights, the tail lights and
the license plate light are turned on . On -ti me can be set fo r a per iod
from
O (off) to 60 seconds. ~

ture on the windshield. The rain sensor wiper intervals depend on
t he sensi tivi ty setting as well as vehic le speed . Dur ing brief s tops,
wiper motion wil l adjust in re lation to the amount of rain on the
windsh ield .
During br ief stops, e.g. at a red ligh t, wiper mot ion wil l automa ti­
cal ly be reduced to the next lower speed . Wipers a lready turning at
low speed. cha nge to i ntermittent w ip ing.
When the ignition is turned on, the washer jets are heated .
With the low beam headlights switched on, p ull the wiper lever
towards you only
briefly t o clean the windshield. Ho lding the wiper
lever wou ld a lso engage the headlight washer system each time you
clean the w indsh ie ld and wou ld dra in the washer fluid reservoir
pr ematurely.
& WARNING
• Wiper blades are crucial for safe driving! Only when they are in
good condition are they able to clear the windows properly to
provide uncompromising visibilit y. Worn or damaged wiper blades
are a safety hazard
=> page 82 , "In stalling new wiper blade s"!
• The rain sensor is only designed to assist and support the
driver . It remains entirely the driver' s respon sibility to monitor
out side weather condit ions and to manually acti vate the wipers as
soon as rain or drizzle reduces visibility through the windshield.
• The windshield must not be treated with water-repellent mate­
rial s. They can increa se glare under poor visibility conditions such
as wetness , darkness , or when the sun is low on the horizon. In
addition , they can cau se the wind shield wipers to chatter.
0 Note
In freezi ng or near freezing conditions:
• Always check that the wiper blades are not frozen to the glass
be fore you turn the w ipe rs on. Loose n a wiper b lade wh ich is fro zen
Controls and equip ­
ment
Cl ea r vision
in place before operating the wipers to prevent damage to the wiper
blade or the wiper motor.
• Do not use the wipers to clear a frosted window. Using the
wipers as a convenient ice scraper will des troy the wiper blades .
• Before you take your vehic le to an automatic car wash, make sure
you have the w indshield w iper system switched o ff (lever in p ositi on
Ol, otherwise the windshield wiper system could get damaged in the
car was h if it should suddenly co me on .
[ i ] Tips
• Make sure th e washer fluid reservoir in the engin e compart men t
is topped off before going on a long trip . Look up=>
page 325 for
check ing and fi lling t he washer conta iner.
• I f you switch off the ignition with the windshield wiper lever still
in the inte rval wi pe positio n and t hen come ba ck a while la ter and
drive off, the rain sensor will reactivate itself after the vehicle speed
has exceeded
4 mph (6 km/h) .
• Worn or dirty windshie ld wiper b lades cause smearing which
can aff ect t he opera tion of the rai n senso r. Check the c ondi tion of
your windshield wiper b lades regu lar ly . •
Headlight washer system
The hea dligh t washer s ys tem cle ans the he adlig hts.
Opera te the win dshi eld w iper/was her sy stem @wit h th e
h eadl igh ts t urned o n by ho ld in g the lev er fo r lo nge r than
one s eco nd
~ page 80, fig. 76 .
The washer je ts extend forward out of the fron t bumper driven by
water pressure to spray the front head lights with water .
You should inspect the head lights regu lar ly (for examp le when refu -
e ling) a nd c lean o ff any solid dirt or insects from the lenses. _,.
I • •

Clear vision
Outside mirrors
The ou tside mirrors are electrically adjusted.
Adjusting the outside mirrors
Fig . 8 0 F orw ard
s ect ion of drive r's
a rmre st: powe r m irror
c ontr ols
Turn the adjusting knob to position ©=:> fig. 80 to adjust
t h e ou ts ide mir ror on t he dr iver's side .
Turn the knob to posi tion
@ to adjust th e outs ide m irror
on the passenger side.
Press th e kno b in the appropr iate direct io n to move the
m irror surface so t hat you have a good view to the rear.
Folding both outside mirrors in flush
- Tur n t he knob to @ .
The mirror surfaces a re heated whenever you switch on the rear
window defogger in response to the outside temperature.
We recommend folding the outside mirro rs flat to help when
parking your vehicle or when maneuvering in very tight spaces.
Tilting the pas senger's side out side mirr or
When you move the selector lever into R (Reverse), the mirror on the
front passenger's doo r (knob turned to@ => fig. 80) will til t slight ly downward
. This make is easier for you to see the curb when you are
b acking in to a parking space.
The mirror returns to its initial pos ition as soon as reverse gear is
disengaged and vehicle speed is above about 9 mph (15 km/hl. The
m irror also returns to its ini tia l p osition if the switch is move d to the
driver's outside mirror
(0 or Neutral @.
Memory setting for the outside mirrors
When the seat position is saved in memory, the posit ion of t he
outside mirrors is saved at the same t ime =>
page 94.
Automatic anti -glare for the outside mirror s
The outside mirrors dim at the same time as the inside mirror . When
the ignition is switched on, the mirrors automatical ly dim
depending on the amount of light str ik ing the mirrors (such as head­
lights shining into the vehicle from the rearl.
When you turn on th e interior l ight, or when y ou m ove the se lect or
lever into
R (Reverse), the anti -g lare function stops and the mirrors
r eturn to their original c ondi tion (n ot dar ken ed).
0 Note
• Curve d (i. e . convex) mirror sur faces increase your field o f view.
Remember that vehic les or other objects wil l appear smaller and
farther away than when seen in a flat mi rror . If you use this mirror to
estimate distances of fol lowing vehic les when changing lanes, you
cou ld estimate incorrectly and cause an accident .
• I f the mirror housing is moved unintentional ly (for example,
while park ing your vehicle), then you must fi rst fo ld the mirror elec ­
trically . Do not readjust the mirror housing manually. You could
damage the motor which controls the mirror .
[ i ] Tip s
• I f there shou ld be a malfunction in the elect rical system, you can
st ill adjust the outsid e m irrors by pressing the edge of t he m irror .
~