infotainment AUDI TT ROADSTER 2016 Workshop Manual

Downloaded from www.Manualslib.com manuals search engine 0
0
N
,.....
N
......
0 If
you make calls using a separate mini SIM
card 1
), you can be reached on the telephone
number of the mini SIM card in the SIM card
reader. Depending on the type of mini SIM card,
this may be the same number as for your current
mobile phone contract (twin/Multi SIM card) or
another number from a different mobile phone
contract.
Important
The vehicle must be stationary, the ignition must
be switched on and the Telephone menu must
have been called up.
Using your own mini SIM card
� The missing corner of the mini SIM card should
be at the front left. Slide the mini SIM card into
the slot in the SIM card reader ¢ Fig. 141 until
you feel it engage.
� If requested, enter the PIN code for your mini
SIM card in the MMI.
� Select and confirm OK.
� To allow the MMI to connect automatically in
the future, select and confirm Yes.
� Select
and confirm either Telephone installed
in vehicle (SIM card) or Personal mobile
phone (Bluetooth).
Telephone installed in vehicle (SIM card): The
external car aerial is used. The SIM card is used
for phone calls and Audi connect*.
Personal mobile phone (Bluetooth): The exter­
nal car aerial is only used in conjunction with the
Audi phone box*. The mini SIM card in the card
reader is only used for Audi connect*.
� You can set whether you would also like the
system to establish a data connection for the
Audi connect services* ¢ page 160. Please ob­
serve the notes on using Audi connect
¢page 159.
After connecting successfully
After connecting successfully, either one or two
symbols (depending on the connection type) will
appear in the status line of the infotainment dis-
[;:j 1} Not available in all markets.
CX) Telephone
play to indicate the signal strength @/@
¢page 130, Fig. 137.
You can go back and change whether calls are
made using the mini SIM card in the SIM card
reader or your mobile phone via I MENU! > Set­
tings > left control button> MMI settings > Con­
nection manager ¢page 215.
In addition, the contacts on the mobile phone are
automatically loaded into the directory of the
MMI. This may take several minutes, depending
on how many contacts are stored on the mobile
phone.
Removing a mini SIM card
� Briefly
press the mini SIM card. The card will
then eject from the slot. Remove the mini SIM
card.
CD CAUTION
- To avoid damaging the SIM card reader, on­
ly use mini SIM cards (25 mm x 15 mm)
¢ Fig. 141. Please contact your service pro­
vider for more information on mini SIM
cards.
- Should you have inserted a different SIM
card size in the SIM card reader, do not un­
der any circumstances attempt to remove it
yourself as this may damage the SIM card
reader. Please contact a qualified workshop.
- If you use SIM card adapters, the vibrations
caused by the movement of the vehicle may
cause the SIM card to become detached
from the adapter -risk of damage to the
SIM card reader.
((!) Note
If your mobile phone does not support the re­
mote SIM Access Profile (e.g. iPhone), you can
use the contacts from your mobile phone by
connecting the mobile phone to the system
via the Directory/contacts profile
¢ page 214, Directory.
145

Downloaded from www.Manualslib.com manuals search engine Telephone
- Edit number before making call: To edit a tele­
phone number before making a call. Select and
confirm OK to use the changes. Or: Press the
left control button to go back without making
the changes.
- Send text message: To send the selected con­
tact a text message.
- Delete call list: Select and confirm if you wish
to Delete this entry or Delete all entries.
- Store as favourite: To store the selected con-
tact as a favourite.
Favourites
Important: A telephone number or a contact
must have been added as a favourite
¢page 149.
Select and confirm a favourite in the favourites
list.
Directory
Important: You must have stored a contact on
your mobile phone.
Select and confirm a telephone number in the di­
rectory ¢page 153.
Enter number
- To enter a telephone number using numbers:
Enter a telephone number using the speller for
numbers¢ Fig. 145.
- To enter a telephone number using letters: Se­
lect and
confirm !ABC!
using the speller for
numbers. Enter a series of letters, e.g. AUDI­
SERVICE using the speller for letters.
- To dial a telephone number: Select and con­
firm qP_ Or: Push the rotary pushbutton down­
wards. Select and confirm OK.
- To delete letters/numbers individually: Select
and confirm�-
- To delete all the numbers/letters you have en­
tered at once: With the selection line activated,
turn the rotary pushbutton to� and press and
hold the rotary pushbutton. Or: Select the right
control button> Clear entry field.
You can enter DTMF tones ("touch-tones") using
the speller while you are talking on the phone.
148 Answe
ring/ending a call
Applies to: vehicles with telephone
- To answer a call: Select and confirm Answer.
- To decline a call: Select and confirm Ignore.
- To mute an active call: Select and confirm
Mute.
- To end a call/cancel the dialling process: Se­
lect and confirm End call. Or: Press the rotary
pushbutton.
To answer a further call: Refer to ¢ page 148,
During a telephone call.
Caller information: Depending on whether the
caller is stored in the directory and whether the
telephone number is transmitted with the call,
the caller's name, his/her telephone number or
Unknown will appear on the infotainment dis­
play. A photo of the caller may also be shown if
one has been assigned to the contact in your mo­
bile phone and transmitted to the MMI. You can
find out if your mobile phone supports this func­
tion by asking your mobile network provider, con­
sulting your mobile phone's operating manual or
visiting www.audi.com/bluetooth.
@ Note
Media playback or the radio is muted auto­
matically during a call.
During a telephone call
Applies to: vehicles with telephone
Important: A call must be in progress.
.., Press the right control button.
The following options may be available during a
call depending on the mobile phone being used
and the type of connection:
- To
make a further call: Select Find contact >
Call list/Directory/Favourites > an entry from
the List.
- To answer a further call when you are talking
on the phone and have another call on hold:
Select Replace. The current call will be replaced
by the incoming call.
-To answer a further call: If you are already
talking on the phone when someone else calls,
�

Downloaded from www.Manualslib.com manuals search engine 0
0
N
,..... Read
1
)
You can have the MMI read an opened text mes­
sage to you.
Text message settings*
Activate Text message notifications to have a no­
tification displayed when a new text message is
received. An envelope symbol 121 is displayed in
the status line of the infotainment display if
there are any new text messages.
The number of your mobile network service pro­
vider's Text message centre is displayed. If no
number has been stored, you can enter the num­
ber of the text message centre. For more infor­
mation, contact your service provider.
Conne ction manager
Refer to¢ page 213.
Telephone settings
Refer to ¢page 155.
� Note
Messages deleted using the MMI are also au­
tomatically deleted on the mobile phone.
E-mail*
Applies to: mobile phones with Bluetooth Message Access
Profile
Depending on your mobile phone, you may be
able to send and receive e-mails via the MMI.
Important: Your mobile phone must have mes­
sage access rights activated in its Bluetooth set­
tings (MAP -Message Access Profile) and must be
connected to the MMI ¢ page 142. Please refer
to the operating instructions for your mobile
phone to find out whether it supports this func­
tion.
.,. Select: IM E
N u
I button > Telephone > left con­
trol button > E-mail (myPhone)/E-mail (addi­
tional phone)*.
N
......
0
,.....
� 1}
Not available in all langu ages. Telephone
Write new e-mail
- To
use
a template: Select and confirm the tem-
plate you require from the list.
- Enter one or more recipients.
- Select and confirm Send.
lnbox
All the e-mails you have received are displayed.
Sent
All the e-mails you have sent are displayed.
Outbox
All the e-mails to be sent are displayed.
Drafts
All the e-mails which have been stored but not
yet sent are displayed.
CD CAUT
ION
Please always observe the information ¢(Din
Wi-Fi hotspot on page 166.
((D) Note
- For more information on which mobile
phones are supported, please go online
(e.g. www.audi.com/bluetooth) or contact
an Audi dealer.
- Please connect your mobile phone to the ve­
hicle's Wi-Fi hotspot* so that the e-mail app
on your mobile phone retains access to the
Internet. This helps to ensure that e-mails
can be sent and received. If you cannot re­
ceive e-mails despite being successfully con­
nected, please contact your e-mail service
provider or your mobile network provider.
Message options
Applies to: mobile phones with Bluetooth Message Access
Profile
.,. Select: I M
ENU
I button >Telephone > left con­
trol button > E-mail (myPhone)/E-mail (addi­
tional phone)* > lnbox/Sent/Outbox > right
control button.
...,
151

Downloaded from www.Manualslib.com manuals search engine Telephone
The
following options may be available depend­
ing on which menu you have selected:
Storing an e-mail as a template
There are already ten e-mail templates stored on
the MMI. You can store up to ten additional tem­
plates.
- Create an e-mail.
- Select and confirm Store as template.
Continue with last edited e-mail
You can continue with the e-mail you last edited.
Reply*
You can reply to an e-mail you have selected in
the Inbox.
Reply to all*
You can reply to all the recipients of an e-mail
you have selected in the Inbox.
Forward
You can forward an e-mail you have selected to
another recipient.
Delete this message*
You can delete an e-mail you have selected.
Read 1
>
You can have the MMI read an opened e-mail to
you.
E-mail settings*
Activate E-mail notifications to have a notifica­
tion displayed when a new e-mail is received. An
envelope symbol� is displayed in the status line
of the infotainment display if there are any new
e-mails.
Connection manager
Refer to¢ page 213.
Telephone settings
Refer to ¢page 155.
l l
Not available in all languages.
152 (I))
Note
Messages deleted using the MMI are also au­
tomatically deleted on the mobile phone con­
nected.
Listening to voicemail
messages Applies to: vehicles with telephone
... Select: I MENU I button >Telephone > left con­
trol button. Select and confirm Call list/Direc­
tory/Favourites > Mailbox.
- To enter the mailbox number: Enter the num­
ber desired. Select and confirm OK.
- To dial the mailbox number: Select and con­
firm Mailbox.
(I)) Note
- This service must be set up and activated by
your mobile network service provider before
you can use it. For more information, con­
tact your service provider.
- The mailbox number depends on your serv­
ice provider.
Emergency call functions
Applies to: vehicles with telephone
... Select: !MENU! button> Telephone > left con­
trol button > Enter number > enter emergency
number (e.g. 112) > OK.
A WARNING
- Since your telephone operates via radio
waves, a connection cannot be guaranteed
under all circumstances. Do not rely solely
on your telephone when a vital communica­
tion (e.g. medical emergency) is involved.
- Always follow the directions of the emer­
gency operators when making an emergency
call and do not end the call before you are
requested to do so.

Downloaded from www.Manualslib.com manuals search engine Audi
connect
... To establish an Internet connection for Audi
connect services, confirm the prompt on the
display with Accept .
... The missing corner of the mini SIM card should
be at the front left. Slide the mini SIM card into
the slot in the SIM card reader ¢ Fig. 150 until
you feel it engage.
... Select and confirm Enter PIN.
... Enter the PIN code for your SIM card in the
MMI.
... Select and confirm OK.
... To allow the MMI to connect automatically in
the future, select and confirm Yes .
... Confirm
the system query of whether an Inter­
net connection should be established with Yes,
connect once or Yes, always connect if neces­
sary.
After connecting successfully
After connecting successfully, the signal strength
and type of connection will appear in the status
line of the infotainment display@/@
¢ page 130, Fig. 137.
You can now use Audi connect.
The available Audi connect services will be listed
on the infotainment display.
Removing a SIM card
... Briefly press the mini SIM card. The card will
then eject from the slot. Remove the mini SIM
card.
CD CAUTION
- To avoid damaging the SIM card reader, on­
ly use mini SIM cards (25 mm x 15 mm)
¢ Fig. 150. Please contact your service pro­
vider for more information on mini SIM
cards.
- Should you have inserted a different SIM
card size in the SIM card reader, do not un­
der any circumstances attempt to remove it
yourself as this may damage the SIM card
reader. Please contact a qualified workshop.
l l
Not available in all markets. Applies to mobile phones
with Bluetooth remote SIM Access Profile on vehicles with
Audi connect* and Audi phone box*.
160 -
If you use SIM card adapters, the vibrations
caused by the movement of the vehicle may
cause the SIM card to become detached
from the adapter -risk of damage to the
SIM card reader.
Connecting an rSAP enabled mobile phone
via Bluetooth
Applies to: vehicles with Audi connect
M
....
"' ....
a:
Fig. 151 Is your mobile phone rSAP enabled? This QR code
takes you directly to the mobile device database (data con­
nection costs vary according to your mobile phone con­
tract).
Important
Your mobile phone must support the Bluetooth
remote SIM Access Profile (Bluetooth rSAP).
For information regarding which Bluetooth con­
nections and functions your mobile phone sup­
ports, contact your mobile network service pro­
vider or consult the mobile device database at
www.audi.com/bluetooth ¢ Fig. 151.
The vehicle must be stationary, and the ignition
must be switched on.
The Bluetooth function and the discoverability
option of the MMI system and the mobile phone
must be activated.
The mobile phone you would like to connect must
not be connected actively to any other Bluetooth
device. The MMI must not be connected to a mo­
bile phone.
Access to your SIM card (SIM Access) must be ac-
tivated on your mobile phone.1
) ..,.

Downloaded from www.Manualslib.com manuals search engine Connecting
a mobile phone
� Select: IM
EN
u I button > Telephone > Connect
mobile phone> Continue. The available Blue­
tooth devices will be shown on the infotain­
ment display. Or: Search for the MMI system
via the Bluetooth device search function on
your mobile phone.
� Select and confirm the desired mobile phone
from the List of Bluetooth devices shown.
� Enter the PIN to establish a connection on your
mobile phone. Or: If the PIN is already being
displayed on your mobile phone, confirm it on
the phone and on the MMI. You have about 30
seconds to enter the PIN.
If you wish to connect your mobile phone via the
remote SIM Access Profile, please also enter your
SIM card's PIN in the MMI1
).
Please note any additional system queries on
your mobile phone, e.g. whether the phone
should connect automatically in the future. On
some mobile phones, you may also need to
download the directory separately.
� Confirm the system query of whether an Inter­
net connection should be established with Ac­
cept.
After connecting successfully
The Bluetooth symbol@, signal strength symbol
@ and type of connection@ � page 130 will ap­
pear on the infotainment display when the mo­
bile phone has been connected successfully.
You can now use Audi connect.
- Bluetooth devices only have to be bonded
once. Depending on the mobile phone you
are using, any devices that have already
been bonded to the MMI system are connec­
ted automatically when they are within
range and the ignition is on.
o l)
Not available in all markets. Applies to mobile phones
� with Bluetooth remote SIM Access Profile on vehicles with
� Audi
connect* and Audi phone box*.
8 2
> The number of possible attempts depends on the SIM
"
� card. Audi
connect
- You receive the SIM PIN and the PUK from
your mobile network service provider to­
gether with the SIM card. If you enter the
SIM PIN code incorrectly three times2
)
in a
row, the SIM card will be be blocked. A PUK
(personal unblocking key) must be entered
in order to reactivate the SIM card.
- The Bluetooth connection between the sys­
tem and the mobile phone is automatically
terminated when you Leave the car.
- For further information regarding your mo­
bile phone, contact your mobile network
service provider or refer to the operating in­
structions for your mobile phone. For infor­
mation on using a phone in your car, please
go online (e.g. www.audi .com/blue tooth)
or ask an Audi dealer.
Using a personal Wi-Fi hotspot
Applies to: vehicles with Audi connect and personal Wi-Fi hot­
spot
Impor tant
The vehicle must be stationary, and the ignition
must be switched on.
Your mobile device and mobile network provider
must support the mobile Wi-Fi hotspot function.
The personal Wi-Fi hotspot on your mobile device
must be activated.
Other devices must be permitted to access the
mobile hotspot.
Connecting the MMI to a personal hotspot
� Select: I M EN
U I button >Telephone > right con­
trol button > Wi-Fi settings > Wi-Fi > on.
� Then select and confirm Network search. The
devices found will be shown on the infotain­
ment display.
� Select and confirm your personal Wi-Fi hotspot
from the List.
� You may need to enter the password specified
by your mobile device.
Ill-
161

Downloaded from www.Manualslib.com manuals search engine severed
automatically when data packets are no
longer required.
The following options are available:
Connection setup
- with request: A data connection will only be es­
tablished on request.
- without request: A data connection will be es­
tablished automatically for the use of Audi con­
nect services.
- never: A data connection will not be establish­
ed. It is then not possible to call up Audi con­
nect services.
When a data connection has been established, a
symbol indicating the type of connection and the
signal strength will appear in the status line of
the infotainment display®/@ ¢ page 130,
Fig. 137.
You can cancel an active data connection manual­
ly by setting the Connec tion setup option to nev­
er.
Data roaming
The Data roaming function is deactivated when
the vehicle leaves the factory. Data roaming
must be activated (�) before you can use a data
connection abroad. This setting is saved for the
current SIM card/the mobile phone currently
connected.
Audi connect (MMI)
With this function, you can allow or deny the use
of Audi connect services if the connection is set
to no request or if requested.
Connection settings
Depending on the SIM card used, the connection
may be configured automatically. However, these
settings can be changed. For more information,
contact your service provider.
-APN: The system access point depends on your
mobile network service provider and is assigned
automatically.
� -
User name: The user name for your on line pro-
� file is assigned by your mobile network service
,.....
� provider.
0
,.....
Vl
CX) Audi
connect
- Password: The password for your on line profile
is assigned by your mobile network service pro­
vider.
To store changed connection settings: Press the
I BACK!
button.
Reset configuration
An online profile is created and configured auto­
matically. The Connection settings you have
changed manually are reset to the default set­
tings.
@ Note
- According to the factory settings, the data
connection will be interrupted initially when
you travel abroad to protect you from unex­
pected roaming charges. If you want to use
Audi connect services abroad, you must first
activate the Data roaming option.
- For more information on roaming charges,
contact your service provider.
- Further information can be found on the In­
ternet at www.audi.com.
Notes on Audi connect
Audi connect services
Applies to: vehicles with Audi connect
{(D) Note
- Audi connect services are only available with
an existing mobile phone contract (or one
set up separately) and if you are in an area
with mobile phone network coverage. De­
pending on your mobile phone tariff, you
may be charged for receiving data packets
on line, especially if you are using the sys­
tem abroad. Because of the high level of da­
ta usage, we strongly recommend using an
unlimited data plan.
- The mobile phone standard LTE* is not
available for use in all countries. For further
information, please consult an Audi dealer
or your mobile network service provider.
- In order to use Audi connect services, you
will need a mini SIM card with a data op­
tion; to use LTE*, the SIM card will also
need to have an LTE data option.
167

Downloaded from www.Manualslib.com manuals search engine 0
0
N
,.....
N
......
0
,.....
Vl
CX) Navigation
Navigation
Calling up the navigation menu
Applies to: vehicles with navigation system
The navigation system guides you directly to your destination, avoiding traffic obstructions and using
alternative routes if desired.
Fig. 153 Illustration: Entering a destination
.,. Selec
t: I N A
V/MAP!
button.
After calling up the navigation system, the Enter
destination menu¢ Fig. 153 will be displayed.
The following information can be shown on the
infotainment display:
(D Entry field for the search function
¢page 170
@ Home address ¢ page 171
@ Destinations recently travelled to
¢page 170
@ Stored favourites ¢page 171
The corresponding destination is displayed (de­
pending on the vehicle's equipment) as a map
preview *® ¢ Fig. 153 as soon as you select an
entry from the list.
If you have connected a mobile phone to the
MMI, your directory contacts are then listed if
you have added navigation data to at least one
contact.
The menu item Favourites @and your directory
contacts are shown in the Enter destination
menu when you have entered one or more letters
in the entry field.
Switching between destination entry and map -
Press the I NAV/MAP!
button repeatedly until
the map is displayed. Or: Press the left control
button > Switch to map.
A WARNING
- Today's driving conditions require the full
attention of drivers. Please always observe
the notes in the chapter ¢page 121, Notes
on traffic safety.
- Pay attention to traffic rules when driving.
- The route calculated by the navigation sys-
tem is a recommendation of how best to
reach a destination. Pay attention to traffic
lights, no stopping signs, lane change re­
strictions, one-way streets, etc.
CD CAUTION
- Should the navigation directions contradict
the current traffic regulations, you must al­
ways follow the traffic regulations.
- The volume should only be set at a level
which enables you to hear distant police and
emergency vehicles clearly -failure to do so
could result in an accident.
..,.
169

Downloaded from www.Manualslib.com manuals search engine 0
0
N
,.....
N
......
0
,.....
Vl
CX) the
Enter destination menu c::> page 169,
Fig. 153.
Entering an address
Applies to: vehicles with navigation system
� Press the I NAV/MAPI
button repeatedly until
the Enter destination menu is displayed
c:>page 169, Fig. 153.
� Select: left control button> Enter address.
- Select and confirm a line (e.g. Street, House
number or Country) and enter the data you
wish to use.
- Select and confirm Start route guidance.
Setting a destination from the map
Applies to: vehicles with navigation system
A Location on the map can be set as a destina­
tion.
� Press the I NAV/MAP!
button repeatedly until
the map is displayed.
- To set a convenient map scale: Turn the rotary
pushbutton anti-clockwise or clockwise to
change the map scale.
- To activate the crosshairs: Press the rotary
pushbutton. The crosshairs will appear on the
map.
-To move the crosshairs: Use the MMI touch pad
to move the crosshairs to the destination.
- To use the destination for route guidance:
Press the rotary pushbutton when the cross­
hairs are displayed. If you wish to set a stop­
over, select and confirm Set as stopover and
then Start route guidance.
- To hide the crosshairs: Press the I BACK!
button.
Additional information on the point selected
with the crosshairs: If you use the crosshairs to
preselect a location on the map, any existing in­
formation on this location (e.g. town name or
special destinations) will be displayed ®
c:>page 178, Fig. 159. Navigation
Using home address/favourite as the
destination
Applies to: vehicles with navigation system
The home address option is a quick and easy way
to have the system guide you home. The favour­
ites make it easier to access destinations you re­
quire regularly.
� Press the I NAV/MAP!
button repeatedly until
the Enter destination menu is displayed
c:>page 169, Fig. 153.
Using the home address as the dest ination
Important: A home address must have been stor­
ed c::> page 175.
Your home address is displayed in the Enter des­
tination menu@c:>page 169, Fig. 153.
- Select and confirm the home address.
- Select and confirm Start route guidance.
Using a favourite as the dest ination
Important: At least one destination must have
been stored as a favourite c::> page 175.
- Enter one or more letters in the entry field for
the search function. The favourites found will
be shown on the infotainment display and
marked with the corresponding symbol@
c:>page 169, Fig. 153.
- Select and confirm the desired favourite.
- Select and confirm Start route guidance.
@ Note
- Further home address settings can be found
on c:>page 175.
- Further favourites settings can be found on
c:>page 175.
171

Downloaded from www.Manualslib.com manuals search engine Navigation
- Select and confirm either Latitude or Longi­
tude.
- Turn the rotary pushbutton to adjust the Lati­
tude/Longitude.
- Press the rotary pushbutton to confirm your en­
try.
- Select and confirm Start route guidance.
Adding a stopover
Applies to: vehicles with navigation system
You can enter a new destination while route
guidance is active.
Fig. 156 Example: Current route guidance with stopover
Important: A destination must already have been
entered.
.,. Press the I NAV
/MAP
I button repeated Ly u nti L
the Enter destination menu is displayed
¢ page 169, Fig. 153.
Entering a desti nation as a sto pover
- Enter a destination in the entry Line (D
¢page 169, Fig. 153.
- Select a destination from the results List and
confirm it.
- Select and confirm Set as stopover.
Deleting a stopo
ver
- Turn the rotary pushbutton to the Left until the
active route guidance is displayed.
-Select and confirm Delete stopover ¢Fig. 156
under the stopover (D
. Select and confirm the
system request if necessary. The stopover will
be deleted.
l l
This function is not available in the Mexican market.
174 Further
options when entering a
destination
Applies to: vehicles with navigation system
"' Press the right control button.
Depending on the function chosen, the following
options may be available to you when you are en­
tering a destination:
Stop route guidance: The route guidance func­
tion must be active. The route guidance will be
stopped. For more information, please refer to
¢page 175.
Map settings: Refer to¢ page 180.
Navigation settings: Refer to ¢ page 176.
Voice guidance: Refer to¢ page 177.
Route criteria: Refer to ¢ page 176.
Show location on map: Important: You must
have selected a destination from the results List.
The destination entered will be shown on the
map.
Parking at this location: Important: You must
have selected a destination from the results List .
All the parking facilities near the Location selec­
ted are shown on the infotainment display.
Special destinations along the route: All special
destinations near the vehicle are displayed while
route guidance is active.
Delete: The selected entry will be deleted. You
can delete individual entries or all the entries
(e.g. favourites or Last destinations).
Audi connect for this location 1
)
: Important: You
must have selected a destination from the re­
sults List. Enables you to search for e.g. City
events or Travel information around the selected
location.
Online traffic data*1): Reception of online traffic
information ¢ page 183 can be switched on/off.
Online traffic data: Reception of on line traffic in-
formation ¢page 183 can be switched on/off. �