CADILLAC XLR 2009 1.G Owners Manual

EJECT:Touch once to eject the chosen CD. The
chosen CD may be selected by rst touching one of the
numbered buttons from 1 to 6. Repeat this procedure
for ejecting up to six discs from the changer. If the
EJECT button is pressed and held until a beep is heard,
the system begins to eject all of the discs from the
player. Once the CD is removed the next will come out
until they are all ejected.
j(Pause):Touch to pause CD play. Touch it again to
resume play or touch the play button.
RANDOM ALL:Touch to hear the tracks on all of
the discs in the CD changer in random, rather than
sequential, order. Press the TUNE/SEEK hard key while
RANDOM ALL is on to randomly seek within that disc.
Touch RANDOM ALL again to turn off random mode.
SCAN DISCS:Touch to hear the rst 10 seconds of
rst track on each disc. Touch this button again to stop
scanning. The CD mutes while scanning.
[(Forward):Touch to fast forward quickly through
a track selection.
«TUNE SEEKª:Press the up arrow on the
TUNE/SEEK switch to seek to the next selection on the
compact disc. If playing last track of disc, pressing
the up arrow seeks to the rst track of the next disc.Press the down arrow to seek to the previous selection
on the compact disc. If playing the rst track of disc,
pressing the down arrow seeks to the last track on the
selected disc. The sound mutes while seeking.
RDS (Radio Data Systems):See “Radio Data Systems
(RDS)” listed previously for information on this button.
SOUND:See “Sound Menu (Tone, DSP, Fade and
Balance)” for information on this button.
DSP (Digital Signal Processing):See “Adjusting the
Speakers” listed previously for information on this button.
CD Changer Errors
CDX ERROR could be displayed for the following:
The road is too rough. The disc should play when
the road is smoother.
The disc is dirty, scratched, wet or not loaded label
side up.
The air is very humid. If so, wait about an hour and
try again.
If any error occurs repeatedly or if an error cannot be
corrected, please contact your dealer/retailer. If the
audio system displays an error number, write it down
and provide this information to your dealer/retailer when
reporting the error.
4-67

CD/DVD Player
The player that is used for the navigation map DVD can
also be used as a single music CD player or a video
DVD player.
CD Player
To use the player as a single music CD player, the
navigation map DVD must be removed. While playing a
CD in the CD/DVD Player, the navigation system is
not available. The message “The disc installed is not a
map DVD” will appear on the display if any of the
navigation hard keys are pressed.
To remove the navigation map DVD and load a
music CD:
1. Start the vehicle.
2. Press the TILT hard key until you hear a beep.
This opens the faceplate of the system.3. If one is loaded, the navigation map DVD ejects
from the slot.
4. Gently remove the navigation map DVD from the
slot and return it to its case.
5. Insert the music CD into the slot. The system pulls
the CD into the player.
6. Press and release the TILT hard key to close the
faceplate.
Notice:Shifting out of P (Park) with the system’s
faceplate open will cause the faceplate to close
automatically. This could cause damage to a
CD, DVD or the system if it is partially loaded.
Before shifting out of P (Park), make sure that the
DVD or CD is loaded properly. The vehicle must
be shifted back into P (Park) to close the faceplate.
4-68

Once a music CD is loaded, the CD player menu appears
on the display. When using the system as a single CD
player, the CD hard key will alternate between the CD
player and the six-disc CD changer if CDs are loaded.
r(Play):Touch to begin playing a CD.
RANDOM:Touch to hear the tracks in random, rather
than sequential, order on the disc. Touch RANDOM
again to turn off random mode.SCAN TRACKS:Touch to hear the rst 10 seconds of
each track on the disc. Touch this button again to
stop scanning. The CD will mute while scanning.
REPEAT TRACK:Touch to repeat the selected track.
r(Rewind):Touch to rewind quickly through a
track selection.
j(Pause):Touch to pause CD play. Touch it again to
resume play or touch the play button.
[(Forward):Touch to fast forward quickly through
a track selection.
«TUNE SEEKª:Touch the up arrow on the
TUNE/SEEK hard key to seek to the next selection on
the compact disc. If playing the last track of the disc,
touching the up arrow will seek to the rst track of the
disc. Touch the down arrow to seek to the previous
selection on the compact disc. If playing the rst track of
the disc, touching the down arrow seeks to the last
track of the disc. The sound mutes while seeking. CD Player Screen
4-69

DVD Player
To use the player as a video DVD player, rst remove
the navigation map DVD or music CD. While playing
a video DVD, the navigation system is not available.
The message “The disc installed is not a map DVD”
appears on the display if any of the navigation hard keys
are pressed.
This feature will not operate unless the vehicle is in
P (Park).
To remove the navigation map DVD and load a
video DVD:
1. With the vehicle in P (Park) and the vehicle running,
press the TILT hard key until a beep is heard.
The faceplate of the system will open.
2. If a map DVD or a music CD is loaded, the system
automatically ejects it. Gently remove it from the
slot and return it to its case.
3. Load the video DVD into the slot. The system pulls
the DVD into the player.
4. Press and release the TILT hard key to close the
faceplate.Notice:Shifting out of P (Park) with the system’s
faceplate open will cause the faceplate to close
automatically. This could cause damage to a
CD, DVD or the system if it is partially loaded.
Before shifting out of P (Park), make sure that the
DVD or CD is loaded properly. The vehicle must
be shifted back into P (Park) to close the faceplate.
Once the faceplate is closed and a video DVD is
loaded, the system automatically plays the DVD.
Playing a DVD
There are two ways to play a DVD depending on which
screen is displayed:
From a map screen, touch the DVD source button.
From the audio screen, press the DVD hard key.
Once a DVD is inserted, the system automatically plays
the DVD.
4-70

DVD Menu Options
To display the menu choices while a DVD is playing,
touch anywhere on the screen and the menu appears.
IMAGE:Touch to either start playing a DVD or to
remove the DVD menu screen.
AUDIO PROGRAM:Touch to change the audio
language heard.VIEWING ANGLE:Touch to adjust the viewing angle of
the DVD. Some DVDs allow you to change the camera
angle. This may not be available on all DVDs.
Depending on the type of DVD being used, this button
may or may not be available.
SUBTITLE:Touch to playback the video with subtitles.
This may not be available on all DVDs. Depending
on the type of DVD being used, this button may or may
not be available.
SCREEN ADJUST:Touch to adjust the brightness,
contrast and red/green color adjustments.
CURSOR:Touch to access the left/right and up/down
cursors on the screen. The cursors allow menu
options to be navigated on the screen.
MENU:Touch to access the DVDs menu options.
Depending on the type of DVD being used, this button
may or may not be available. Touch the button
labeled one, two or blank to change the image size
displayed on the screen.
TITLE:Touch this button to display the title of the DVD.
Depending on the type of DVD being used, this button
may or may not be available.
4-71

If TITLE is available, this button allows navigation
through chapters or the DVD features. Once the
appropriate title or track has been selected, press the
Return button then the IMAGE button on the DVD menu
to view the movie in full screen.
SETTING:Touch to adjust the following:
LANGUAGE PREFERENCES
PARENTAL LOCKUnder LANGUAGE PREFERENCES, you can select
different languages for AUDIO, SUBTITLE and
DVD MENUS.
1. To change languages, rst select the option to be
changed.
2. Select a language from the list given.
3. Touch RETURN to end out the menu. The selected
language is now saved.
Under PARENTAL LOCK, select SET RATING LIMIT
and SET PIN.
To SET RATING, rst touch the button. Then, make
the selection. Touch RETURN to end out the menu.
The selection is now saved.
To use PARENTAL LOCK, rst touch the button. Then,
enter a four-digit numeric password. Touch RETURN
to end out the menu.
SEARCH:Touch to search to a certain scene on
the DVD. Depending on the type of DVD being used,
this button may or may not be available.
r(Rewind):Touch to rewind through a scene during
playback.
r(Resume):Touch to resume playing a DVD.
4-72

c(Stop):Touch to stop the DVD.
j(Pause):Touch to pause the DVD.
[(Forward):Touch to advance rapidly during
playback.
L(Frame Advance):Touch to advance by chapter
during playback.
Radio Personalization with Home
and Away Feature
With this feature, the latest audio system settings can be
recalled that were adjusted the last time the vehicle was
operated. This feature allows two different drivers to store
and recall their own audio system settings. The settings
recalled by the audio system are determined by which
transmitter (1 or 2) was used to enter the vehicle.
The number on the back of the transmitter corresponds
to driver 1 or to driver 2. The audio system settings will
automatically adjust to where they were last set by the
identied driver. The settings can also be recalled by
briey pressing the MEMORY seat switches 1 or 2
located on the driver door.The audio system can store HOME and AWAY preset
stations. HOME and AWAY preset stations allow use of
one set of preset radio settings in the area where you
live, and another set when you go out of town. That way,
there is no need to reprogram the preset stations
every time you travel.
To select HOME and AWAY preset stations:
1. With the audio system on, touch the Audio hard key
and turn the audio system off.
2. Touch the HOME or AWAY button from the main
audio screen.
The next time the audio system is turned on, the
system recalls the last active preset selection.
When battery power is removed and later applied, the
home audio system preset stations do not have to
be reset because the audio system remembers them.
However, the away radio preset stations have to
be reset.
4-73

Voice Recognition
The navigation system’s voice recognition allows for
hands-free operation of navigation and audio system
features. Voice recognition can be used when the
ignition is on or when Retained Accessory Power (RAP)
is active.
This feature only works if the map DVD is inserted and
I AGREE has been selected. If voice recognition is used
without the map DVD inserted, the system displays
“Please insert the navigation map DVD to use the voice
recognition feature.” See “Installing the DVD Map Disc”
underMaps on page 4-38.
To use navigation voice recognition:
1. Push and hold the talk
symbol steering wheel
control until a beep is
heard. The audio
system mutes.2. Clearly state one of the commands listed on the
following pages. For example, say “FM1”.
3. The system states the command being implemented.
For example, the system says “FM1 Radio” and
change the audio system to the FM1 source.
The voice recognition can be ended by not speaking
any commands. After about ve seconds of silence, the
system automatically cancels voice recognition.
At times, the system may not understand a spoken
command. If this happens, try saying the command
again. If a spoken command is not available, the system
provides feedback based on availability.
While using voice recognition, make sure to keep
interior noise levels to a minimum. Otherwise, the
system might not recognize voice commands.
The system only recognizes commands spoken in
English.
4-74

Voice Recognition Commands
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. To use the voice commands,
refer to the instructions listed previously.
Help Commands
These commands are universal and will enable use of
the help prompts available from the system.
Map Help:Provides the available commands for the
map screen.
Destination Help:Provides the available commands
for entering a destination.
Guidance Help:Provides the available commands for
the guidance method.
Radio Help:Provides the available commands for
the radio.
Disc Help:Provides the available commands for the
CD changer.
Radio Commands
Radio:Changes the audio system to the next radio
audio source.
AM:Changes the audio system to the AM audio
source.
FM1:Changes the audio system to the FM1 audio
source.
FM2:Changes the audio system to the FM2 audio
source.
XM1:Changes the audio system to the XM1 audio
source.
XM2:Changes the audio system to the XM2 audio
source.
CD Changer:Changes the audio system to the CD
changer audio source.
WX, Weather Band:Changes the audio system to the
weather band audio source.
Power On, Audio On:Turns the system’s power on.
Power Off, Audio Off:Turns the system’s power off.
4-75

Seek Up:Causes the selected audio source to seek up
to the next strongest signal.
Seek Down:Causes the selected audio source to seek
down to the next strongest signal.
Stop Scan:Causes the audio source to stop scanning
for the next strongest signal.
CD Changer Commands
Track Up:Causes the CD changer to skip up to the
next track.
Previous Track, Track Down:Causes the CD changer
to go to the previous track.
Screen Commands
Screen Day Mode, Day Mode On:Adjusts the
system’s screen setting to the day mode.
Screen Night Mode, Night Mode On:Adjusts the
system’s screen setting to the night mode.
Screen Auto Mode, Auto Mode On:Adjusts the
system’s screen setting to auto mode.
Screen Off:Turns the system’s screen display off.
Position Commands
Current Position, Current Location, Show Current
Position, Show Current Location:Displays the
vehicle’s current location on the map screen.
Map:Displays the map screen.
Map Commands
Zoom In:Zooms in when on the map screen.
Zoom Out:Zooms out when on the map screen.
Maximum Scale:Zooms out to the maximum available
map scale when on the map screen.
Minimum Scale:Zooms in to the minimum available
map scale when on the map screen.
Heading Up, Change to Heading Up:Displays the
Vehicle Up heading when on the map screen. The map
scale should be set for under 2 miles (4 km).
North Up, Change to North Up:Displays the North Up
heading when on the map screen if the map scale is
set to 2 miles (4 km) or less.
4-76