166
In the event of a breakdown
â–º Unclip the interior trim.
â–º Disconnect the connector by moving aside
its tab.
â–º Turn the bulb holder a quarter turn
anti-clockwise.
â–º Change the bulb.
â–º Put the bulb holder back in place and
reconnect the connector.
â–º Put the trim back in place.
With tailgate
â–º Remove the plastic lens using a screwdriver.
â–º Change the bulb.
â–º Refit the plastic lens and press on it.
Third brake lamp
Type A, W16W - 16W
– Unscrew the two nuts.
â–º Press the locking clip and disconnect the
connector .
â–º
T
urn the bulb holder a quarter turn
anti-clockwise.
â–º
Remove the bulb holder
.
â–º
Replace the faulty bulb.
To replace these bulbs, it is possible to contact a CITROËN dealer or a qualified
workshop.
Rear lamps
For more information on Changing a bulb
and, in particular, the types of bulb, refer to the
corresponding section.
With side-hinged doors/tailgate
1. Brake lamps/sidelamps.
Type
B, P21/5W
2. Direction indicators.
Type
B, PY21W (amber) 3.
Reversing lamps.
Type B, P21W
4. Foglamps.
Type B, P21W
â–º From the inside, disconnect the electrical
connector at the rear of the lamps.
â–º Remove the two fixing bolts using the Torx
key provided in your vehicle.
For more information on the Tool kit, please
refer to the corresponding section.
â–º
From the outside, pull the whole lamp unit
towards you (with side-hinged doors ) or
towards the centre of the vehicle (with tailgate
).
â–º Open the tabs, then pull out the lamp holder .
â–º Remove the faulty bulb by pressing lightly on
it while turning it a quarter turn anti-clockwise.
â–º
Replace the bulb.
Take care to reposition the tabs and the wiring correctly to avoid trapping the
wire.
After changing a rear direction indicator bulb, the reinitialisation time is
approximately 2 minutes or more.
Number plate lamps
Type A, W5W - 5W
With side-hinged doors
