warning CITROEN C-ELYSÉE 2016 User Guide

17
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Warning / indicator lampStateCause Action / Observations
Braking fixed. The
  brake   fluid   level   has   dropped  
s

ignificantly.You
  must   stop   as   soon   as   it   is   safe   to   do   so.
Top
  up   with   brake   fluid   listed   by   CITROËN.
If
  the   problem   persists,   have   the   system   checked   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
+ fixed,
  associated  
w

ith   the   ABS   warning  
lam

p.The
 
e
lectronic  
b
rake  
f
orce  
d
istribution  
(

EBFD)   system   has   a   fault.You
  must   stop   as   soon   as   it   is   safe   to   do   so.
Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Maximum
coolant
temperature fixed
  red.The
  temperature   of   the   cooling  
s

ystem   is   too   high.Stop
  as   soon   as   it   is   safe   to   do   so.
Wait
  until   the   engine   has   cooled   down   before   topping  
u

p   the   level,   if   necessary.
If
  the   problem   persists,   contact   a   CITROËN   dealer   or  
q

ualified
 w
orkshop.
Under-inflation fixed,
  accompanied   by  
a

n   audible   signal   and  
a

  message.The
  pressure   in   one   or   more   tyres   is  
t

oo   low.Check
  the   tyre   pressures   as   soon   as   possible.
This
  check   should   preferably   be   carried   out   when   the  
t

yres   are   cold.
You
  must   reinitialise   the   system   after   the   adjustment  
o

f   one   or   more   tyre   pressures   and   after   changing   one  
o

r   more   wheels.
For
  more   information   on   under-inflation   detection,  
r

efer   to   the   corresponding   section.
+ flashing
  then   fixed,  
a

ccompanied   by   the  
S

ervice   warning   lamp.The
  system   has   fault:   the   tyre  
p

ressures   are   no   longer   monitored.Check
  the   tyre   pressures   as   soon   as   possible.
Have
  the   system   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
1
Monitoring

18
Warning / indicator lampStateCause Action / Observations
Dynamic
stability control
(ESP/ASR) flashing.
The
  ESP/ASR   regulation   is   active. The   system   optimises   traction   and   improves   the  
d

irectional   stability   of   the   vehicle.
fixed. Unless
  it   has   been   deactivated  
(

button   pressed   and   its   indicator   lamp  
o

n)   the   ESP/ASR   system   has   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Engine
autodiagnosis
system fixed.
The
  emission   control   system   has   a  
f

ault.
The warning lamp should go off when the engine is started.
I f   it   does   not   go   off,   contact   a   CITROËN   dealer   or   qualified w

orkshop   without   delay.
flashing. The   engine   management   system   has  a
  fault. Risk
  of   destruction   of   the   catalytic   converter.
Have   it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Anti-lock
Braking System
(ABS)
fixed.
The   anti-lock   braking   system   has   a  
f

ault.
The   vehicle   retains   conventional   braking.
Drive   carefully   at   reduced   speed   and   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop   without  
d

e l ay.
Engine fault fixed,
 o

range. The
  engine   has   a   minor   fault. Contact   a   CITROËN   dealer   or   a   qualified   workshop   as  
s

oon   as   possible.
fixed,
  red. The
  engine   has   a   major   fault   causing  
a

  breakdown. You
  must   stop   as   soon   as   it   is   safe   to   do   so.
Park,
  switch   off   the   ignition   and   contact   a   CITROËN  
d

ealer   or   qualified   workshop.
Monitoring

19
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Warning / indicator lampStateCause Action / Observations
Engine oil
pressure fixed.
There
  is   a   fault   with   the   engine  
l

ubrication   system.You
  must   stop   as   soon   it   is   safe   to   do   so.
Park,
  switch   off   the   ignition   and   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Battery charge fixed. The
  battery   charging   circuit   has   a  
f

ault   (dirty   or   loose   terminals,   slack   or  
c

ut   alternator   belt,   ...).The
  warning   lamp   should   go   off   when   the   engine   is  
s

tarted.
If
  it   does   not   go   off,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Door(s) open /
Electric opening
boot lid open fixed
  if   the   speed   is
 b

elow  
6
 
m
ph  
(
10   km/h).A
  door   or   the   electric   opening   boot   is  
s

till   open.Close
  the   door   or   boot.
fixed
  and   accompanied
 b

y   an   audible   signal
 i

f   the   speed   is   above
 6

  mph   (10   km/h).
Low fuel level
fixed. When
  it   first   comes   on   there   remains  
a

pproximately 5 litres of fuel in the
tank. You
  must   refuel   as   soon   as   possible   to   avoid   running  
o

ut   of   fuel.
This
  warning   lamp   will   come   on   every   time   the   ignition  
i

s   switched   on,   until   a   sufficient   addition   of   fuel   is  
m

ade.
Fuel
  tank   capacity:   approximately   50   litres.
Never
  continue   to   drive   until   you   run   out   of   fuel   as  
t

his   could   damage   the   emission   control   and   injection  
s

ystems.
1
Monitoring

20
Warning / indicator lampStateCause Action / Observations
Airbags on
  temporarily. This   lamp   comes   on   for   a   few  
s

econds   when   you   turn   on   the  
i

gnition,   then   goes   off.This
  lamp   should   go   off   when   the   engine   is   started.
If
  it   does   not   go   off,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
fixed. One
  of   the   airbag   or   seat   belt  
p

retensioner   systems   has   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Power steering fixed. The
  power   steering   has   a   fault. Drive   carefully   at   reduced   speed.
Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Driver's seat
belt not fastened
or unfastened
/
Front
passenger's seat
belt unfastened fixed
  or   flashing  
a

ccompanied   by   an  
inc

reasing
 a
udible
 s

ignal.The
  driver   has   not   fastened   or   has  
u

nfastened   their   seat   belt.
The
  front   passenger   has   unfastened  
t

heir   seat   belt.Pull
  the   strap   then   insert   the   tongue   in   the   buckle.
Monitoring

21
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Warning / indicator lampStateCause Action / Observations
AdBlue
® additive
(BlueHDi Diesel) fixed,
  on   switching o
n   the   ignition, a

ccompanied   by   an
 a

udible   signal   and   a
 m

essage   indicating   the
 r

emaining
 d
riving
 r
ange.The
  remaining   driving   range   is  b
etween   350   miles   (600   km)   and  
1

500   miles   (2400   km).Have
  the   AdBlue® additive tank topped up as soon a
s
 
possible:
 
go
 
to
  a   CITROËN   dealer   or   a   qualified  
w

orkshop,
 
or
 
carry   out   this   operation   yourself.
+ flashing
 
associated
 
with
 t

he
 
SERVICE
 
warning
 l

amp,
 
accompanied
 
by
 a

n
 
audible
 
signal
 
and
 
a
 m

essage
 
indicating
 
the
 r

emaining
 d

riving
 r

ange. The
 
remaining
 
driving
 
range
 
is
 
b

etween
 
0
 
and
 
350
 
miles
 
(600
 
km). You
 
must
 
top-up the  
Ad
Blue
® additive tank to avoid
a b
reakdown :
 
go
 
to
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop,
 
or
 
carry
 
out
 
this
 
operation   yourself.
flashing,
 as

sociated
 w

ith
 
the
 
SERVICE
 w

arning
 lam

p,
 a

ccompanied
 
by
 
an
 a

udible
 
signal
 
and
 
a
 m

essage
 
indicating
 
that
 s

tarting
 
is
 
prevented. The
 
AdBlue
® tank is empty: the s
tarting
 
inhibition   system   required  
b

y
 
legislation   prevents   starting   of   the  
e

ngine. To
  be   able   to   start   the   engine,   you   must   top-up the
AdBlue® additive tank: go to a CITROËN dealer or a
 
qualified   workshop,   or   carry   out   this   operation  
y

ourself.
It is essential
 

to   add   at   least   3.8   litres   of   AdBlue
® to
the
 
additive
 
tank.
For
 
topping-up
 
or
 
for
 
more
 
information
 
on
 
the
 
AdBlue
® additive, refer to the corresponding section.
1
Monitoring

22
Warning / indicator lampStateCause Action / Observations
+
+ SCR emissions
control system
(BlueHDi Diesel)
fixed,
  on   switching  
o

n   the   ignition,  
a

ssociated   with   the  
S

ERVICE   and   engine  
d

iagnostic   warning  
lam

ps,
 a
ccompanied
 b

y   an   audible   signal  
a

nd   a   message.A
  fault   with   the   SCR   emissions  
c

ontrol   system   has   been   detected.This
  alert   disappears   once   the   exhaust   emissions  
r

eturn   to   normal   levels.
flashing,
 o

n
 s
witching
 o

n   the   ignition,
 a

ssociated   with   the
 S

ERVICE   and   engine
 d

iagnostic
 w
arning
 lam

ps,
 a
ccompanied
 b
y
 a

n   audible   signal   and
 a

  message   indicating
 t

he
 r
emaining
 d
riving
 ra

nge.After
  confirmation   of   the   fault   with   the  
e

missions   control   system,   you   can  
d

rive   for   up   to   650   miles   (1   100   km)  
b

efore   the   engine   starting   inhibition  
s

ystem   is   triggered.Contact
  a   CITROËN   dealer   or   a   qualified   workshop  
w

ithout delay, to avoid a breakdown .
flashing,
  on   switching  
o

n   the   ignition,  
a

ssociated   with   the  
S

ERVICE   and   engine  
d

iagnostic   warning  
lam

ps,
 a
ccompanied
 b

y   an   audible   signal  
a

nd   a   message.You
  have   exceeded   the   authorised  
d

riving   limit   following   confirmation  
o

f   a   fault   with   the   emissions   control  
s

ystem:   the   engine   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must call on a
CITROËN
  dealer   or   a   qualified   workshop.
Monitoring

24
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes   to   indicate   that   the   service m

ust   be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   186   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates:
For
  BlueHDi   Diesel   versions,   this   alert  
m

ay   also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Service indicator
zero reset
After each service, the service indicator must b
e   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   trip   distance   recorder  
z

ero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears.
5
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 t
he
 
distance
 
recorder
 
resumes
 
its
 
normal
 
ope

ration.
 T

he spanner remains on .The
 
distance
 
remaining
 
may
 
be
 
w

eighted
 
by
 
the
 
time
 
factor,
 
depending
 
o

n
 
the
 
driving
 
conditions.
Therefore,
 
the
 
spanner
 
may
 
also
 
come
 
o

n
 
if
 
you
 
have
 
exceeded
 
the
 
period
 
s

ince
 
the
 
last
 
service,
 
indicated
 
in
 
the
 
ma

nufacturer's
 ser

vice
 s

chedule.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
s

panner
 
may
 
also
 
be
 
brought
 
on
 
earlier
 
t

han
 
expected,
 
depending
 
on
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
(

depending
 
on
 
the
 
country
 
of
 
sale).
The
 
rate
 
of
 
deterioration
 
of
 
the
 
engine
 o
il
 
depends
 
on
 
the
 
driving
 
conditions
 
in
 w
hich
 
the
 
vehicle
 
is
 
used.
Monitoring

29
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Monochrome screen C (Audio system / Bluetooth)
This displays the following information:
-  t ime,
-
 d

ate,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-
 
s
tatus   of   doors   and   boot,
-
 
p
arking   sensors,
-
 
a
udio   sources   (radio,   CD,   USB   port,  
j

ack socket...),
-
 
t
rip   computer   (refer   to   the   "Instruments   and  
c

ontrols"
 s
ection).
Warning
  or   information   messages   may   appear  
t

emporarily.   These   can   be   cleared   by   pressing  
t

he " BACK "
  button. From
  your   Audio   system   /   Bluetooth   control  p
anel,   you   can   press:
F
the "MENU"
 

button   to   gain   access   to   the  
m

ain menu,
F
the "MODE"
 

button   to   select   the   display  
o

f   information   in   "Full   screen"   or   "New  
w

indow"   mode,
F

t
he "7" or " 8"
  buttons   to   navigate   in   a   list,
F
 
p
ress   the   central   button   to   confirm,


or
F

t
he "BACK "
  button   to   abandon   the  
o

peration   in   progress   or   go   back   up   one  
l

evel   in   the   menu.
Displays in the screenControls
F Press the "MENU" button   to   gain   access  t
o the main menu :
-
 
"
Multimedia",
-
 "

Telephone",
-
 
"
Trip   computer",
-
 
"
Bluetooth   connection",
-
 "

Personalisation-configuration",
F

P
ress the " 7" or " 8" buttons to select the
menu
  required,   then   confirm   by   pressing  
t

he   centre   button.
Main menu
1
Monitoring

39
C-elysee_en_Chap02_ouvertures_ed01-2016
Doors
From outside
F After  unlocking   the   vehicle   using   the  r
emote   control   or   the   key,   pull   the   door  
han

dle.
Opening
From inside
F Pull  the   interior   control   lever   of   a   front   door;  t
his   unlocks   the   vehicle   completely. -
 
w
hen the engine is running
,
this   warning   lamp   comes   on,  
a

ccompanied   by   a   message   in  
t

he   multifunction   screen   for  
a   few   seconds,
-  
w
hen the vehicle is moving   (speed  
h

igher   than   6   mph   (10   km/h)),   this   warning  
l

amp   comes   on,   accompanied   by   an  
a

udible   signal   and   a   message   in   the  
m

ultifunction   screen   for   a   few   seconds.
Closing
When a door is not closed correctly:
Secondary control
For mechanically locking and unlocking the d
oors   in   the   event   of   a   fault   with   the   central  
l

ocking   system   or   a   battery   failure.
Driver's door
Insert the key in the lock to lock or unlock the do o r.
Passenger doors
F On   the   rear   doors,   check   that   the   child   lock  i
s   not   on.
F
 
R
emove   the   black   cap   located   on   the   edge  
o

f   the   door,   using   the   key.
F
 
I
nsert   the   key   into   the   aperture   without
 f

orcing,   then   without   turning,   move   the   latch
 s

ideways   towards   the   inside   of   the   door.
F
 
R
emove   the   key   and   refit   the   cap.
2
Access

40
C-elysee_en_Chap02_ouvertures_ed01-2016
Boot
Opening
Unlocking and releasing the boot
using the remote control
F Press the centre button on the remote   control   for   more   than  
on

e second.
The
  boot   lid   is   released   and   opens  
s

li g ht l y.
Releasing the boot from the
inside
Opening the boot
F Raise  the   boot   lid   to   its   fully   open   position.
F  
L
ower   the   boot   lid   using   one   of   the   interior  
g

rab
 han
dles.
Closing
Electric boot opening
- when the engine is running , this
warning lam p c omes o n, a ccompanied b

y   a   message   in   the   multifunction
 s

creen   for   a   few   seconds,
- when the vehicle is moving   (speed   above 
6   mph   (10   km/h)),   this   warning   lamp   comes o

n,   accompanied   by   an   audible   signal   and
 
a

  message   in   the   multifunction   screen   for
 
a

  few   seconds.
F
 
P

ress
 
the
 
boot
 
opening
 
switch
 
located
 
o

n
 
the
 
left
 
of
 
the
 
dashboard
 
(electric
 
boot
 
o

pening).


or
Mechanical boot opening
There is no associated warning for the boot lid n ot   being   fully   closed.
You
  should   ensure   that   the   boot   is   closed  
c

o r r e c t l y.
If
  the   boot   is   not   closed   correctly:
F
 
R

aise
 
the
 
control
 
lever
 
below
 
the
 
driver's
 
d

oor
 
(mechanical
 
boot
 
opening).
The
 
boot
 
lid
 
is
 
released
 
and
 
opens
 
slightly.
Access