automatic transmission CITROEN C-ELYSÉE 2016 Owners Manual

171
C-elysee_en_Chap09_info-pratiques_ed01-2016
Towing your vehicleTowing another vehicle
F On  the   front   bumper,   unclip   the   cover   by  p
ressing   on   the   left   edge.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar. Put
  the   gear   lever   into   neutral  
(

position

N for an electronic or
automatic   gearbox).
Failure   to   follow   this   instruction   may  
c

ause   damage   to   some   components  
(

braking,   transmission...)   and   the  
a

bsence   of   braking   assistance   when  
t

he   engine   is   restarted.
F  U nlock   the   steering   by   turning   the   key  i
n   the   ignition   one   notch   and   release   the  
par

king
 b
rake.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.This
  towing   is   strictly   prohibited   (risk   of  
d

amaging   your   vehicle).
9
Practical information

04
TA
200
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
RDS, if displayed, enables you to continue listening to the same station  by   automatic   retuning   to   alternative   frequencies.   However,  
in

  certain   conditions,   coverage   of   an   RDS   station   may   not   be  
assured

  throughout   the   country   as   radio   stations   do   not   cover  
100

  %   of   the   territory.  
This
  explains   the   loss   of   reception   of   the  
station

  during   a   journey.
AUDIO
RDS Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic  
report

  is   transmitted,   the   current   audio   source   (Radio,   CD,  
USB,

  ...)   is   interrupted   automatically   to   play   the  
T
A
 
message.  
Normal

  playback   of   the   audio   source   resumes   at   the   end   of   the  
transmission

  of   the   message.
Press TA
 

to   activate   or   deactivate   the  
reception

  of   traffic   messages.
When
 
the
 
radio
 
is
 
displayed
 
on
 
the
 
screen,

 
press
 
the
 
control
 
knob
 
to
 
display
 
the

 
contextual
 
menu.
Select "RDS"
 
and
 
confirm
 
to
 
save.
"RDS"
 
is
 
displayed
 
in
 
the
 
screen.

02
230
C-elysee_en_Chap12b_RDE1_ed01-2016
RDS, if displayed, enables you to continue listening to the same station  by   automatic   retuning   to   alternative   frequencies.   However,   in  
certain

  conditions,   coverage   by   an   RDS   station   may   not   be   assured  
throughout

  the   country   as   radio   stations   do   not   cover   100   %   of   the  
territory

.  
This
  explains   the   loss   of   reception   of   the   station   during   a  
journey

.
AUDIO
RDS
Press MENU.
Select "Radio"
  then   confirm   by  
pressing

 
OK
.
Select "RDS"
 

then   confirm   by  
pressing

 
OK
.
Select "On" or "Off" to switch RDS on
or
  off,   then   confirm   with   OK to save the
selection.
Receiving TA messages
The TA  (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a   radio  
station

  transmitting   this   type   of   message.   When   a   traffic   report   is  
transmitted,

  the   current   audio   source   (Radio,   CD,   ...)   is   interrupted  
automatically

  to   play   the  
T
A
 
message.   Normal   playback   of   the   audio  
source

  resumes   at   the   end   of   the   transmission   of   the   message.
Select "Radio"
  then   confirm   by  
pressing

 
OK
.
Select "Traffic TA"
  then   confirm   by  
pressing

 
OK
.
Select "On" or "Off" to switch on or off
the
  reception   of   traffic   announcements  
then

  confirm   by   pressing  
OK
to save
the
  selection.
Press MENU to switch on or off the
reception
  of   traffic   announcements.