engine Citroen C4 PICASSO 2016 2.G Manual PDF

165
C4-Picasso-II_en_Chap04_conduite_ed01-2016
When the dynamic cruise control is
automatically paused, it can only be
reactivated when safe conditions are
restored.  The   message   "Activation  
no

t possible, conditions unsuitable"
is displayed while reactivation is not
possible.
When the conditions allow, it is
recommended that the system be
reactivated
  by   pressing   button   2 or 3,
which
  will   make   the   current   speed   of  
y

our vehicle the new cruise speed
setting,
  rather   than   by   pressing   button   4
(on/pause)
  which   reactivates   the   system  
u

sing   the   old   cruise   speed   setting,  
w

hich may be very different from the
current
  speed   of   your   vehicle. The
  dynamic   cruise   control   uses   only   engine  b
raking   to   slow   the   vehicle.   Consequently   the  
v

ehicle   loses   speed   slowly,   as   when   releasing  
t

he   accelerator   pedal.
The
  system   is   paused   automatically:
-

i
f the vehicle in front slows down too much
or too suddenly, and the driver does not
brake,
-

i
f a vehicle comes between your vehicle
and the vehicle in front,
-

i
f the system does not slow the vehicle
enough
  to   continue   to   maintain   a   safe  
d

istance,   for   example   when   descending   a  
s

teep   hill.
Limits of operation
As the radar's field of view is quite narrow, it is possible   that   the   system   may   not   detect:
The
  cruise   control   does   not   take   account   of:
-
s

tationary vehicles,
-
 
v
ehicles   driving   in   the   opposite   direction.
-

v
ehicles of reduced width, such as
motorcycles,
  for   example,
-
 
v
ehicles   not   running   in   the   middle   of   the  
lan

e,
-
 
v
ehicles   entering   a   corner,
-
 
v
ehicles   changing   lane   at   the   last   moment.
The
 
regulation
 
range
 
is
 
limited
 
to
 
a
 
maximum
 
d

ifference
 
of
 
20
 
mph
 
(30
 
km/h)
 
between
 
the
 
s

peed
 
setting
 
and
 
the
 
speed
 
of
 
the
 
vehicle
 
in
 
f

ront.
 
Above
 
this,
 
the
 
system
 
goes
 
into
 
pause
 
if
 
a

 
safe
 
distance
 
is
 
not
 
maintained.
Severe weather conditions (very heavy
rain, accumulations of snow in front
of the radar) can inter fere with the
operation
 
of
 
the
 
system,
 
resulting
 
in
 
t

he
 
display
 
of
 
the
 
message
 
"SYSTEM
 
I

NACTIVE:
 
Visibility
 
reduced".
 
The
 
f

unction remains unavailable until the
message
 d

isappears.
4
Driving

170
C4-Picasso-II_en_Chap04_conduite_ed01-2016
When the cruise control is paused,
it can only be reactivated when all of
the  safety   conditions   are   met.   The  
m

essage   "Activation   not   possible,  
c

onditions unsuitable" is displayed while
reactivation
  is   not   possible.
Wait until the speed of the vehicle
is
  close   to   the   speed   setting   before  
r

eactivating   the   system   -   by   pressing  
b

utton 2 or 3 - in order to set your
current
  speed   as   the   new   speed   setting.
Modification of the speed setting
Modification from the speed limit
recognition system
F The speed to be memorised is displayed in the   instrument   panel.
F
 
M
ake   an   initial   press   on   button   5;
  a  
m

essage   is   displayed   to   confirm   the  
m

emorisation
 r
equest.
F

P
ress button 5   again   to   save   the   suggested  
s

peed.
The speed is then displayed in the instrument
panel
  as   the   new   speed   setting.
As a precaution, it is recommended that
you
  select   a   cruise   speed   setting   close  
t

o the current speed of your vehicle, so
as to avoid any sudden acceleration or
deceleration
  of   the   vehicle.
For more information on Speed limit
recognition
and its memorisation, refer to the
corresponding
 s

ection.
Engine
 
running
 
and
 
cruise
 
control
 
on
 
(green),
 
y

ou
 
can
 
modify
 
the
 
speed
 
setting.
Modification from the current
speed
F By successive short presses on button 2 or 3,
  to   raise   or   lower   the   setting   in   steps   of   +  
o

r   -    1   mph   (km/h),
F

B
y a maintained press on button 2 or 3 ,
to
  raise   or   lower   the   setting   in   steps  
of
  +   or   -   5   mph   (km/h).
Take
  care:   a   prolonged   press   on  
b

utton 2 or 3   will   cause   a   very   quick  
c

hange   in   the   speed   of   your   vehicle.
Driving

171
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Modification of the inter-vehicle distance setting
Three predefined inter-vehicle distance settings are   offered:
-

"
Distant"
 
(3   dashes),
-

"
Normal" (2 dashes),
-

"
Close"
 
(1   dash). Engine
  running   and   cruise   control   selected  
(

grey),   you   can   modify   the   inter-vehicle  
d

istance
 s
etting:
F
p
ress button 6 to display the selection
screen for inter-vehicle distance,
F
p
ress button 6   repeatedly   to   cycle   through  
t

he   predefined   settings.
The selection screen closes after a few
seconds.
The   modification   is   then   taken   into   account.
This   setting   remains   in   memory,   whatever   the  
s

tate   of   the   system   and   when   the   ignition   is  
s

witched   off.
It
 
is
 
possible
 
to
 
exceed
 
the
 
speed
 
setting
 
t

emporarily
 
by
 
depressing
 
the
 
accelerator
 
ped

al.
The
 
cruise
 
control
 
no
 
longer
 
manages
 
the
 
b

raking
 
system
 
during
 
this
 
period.
Simply release the accelerator pedal to return
to
 
the
 
programmed
 
speed.
If
 
the
 
programmed
 
speed
 
setting
 
is
 
exceeded,
 
t

he
 
display
 
of
 
the
 
speed
 
setting
 
disappears
 
a

nd
 
a
 
message
 
"Cruise
 
control
 
suspended"
 i
s displayed until the accelerator pedal is
released.
Exceeding the programmed
setting
4
Driving

191
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Operation
Activating the function
With the engine running:
F I n the Driving menu, select the " Driving
assistance " tab, then "Panoramic visual
aid ".
With this menu displayed, select one of the
three
  views:
Deactivating the function
F Accelerate   so   as   to   exceed   18   mph  
(30   km/h).
or
F

I
n the Driving menu, select the " Driving
assistance " tab, then "Panoramic visual
aid ".
F
 
Sel
ect
 "
Camera
 O
ff".
Check
  the   cleanliness   of   the   camera  
l

enses
 r
egularly.
High pressure jet wash
When
  washing   your   vehicle,   direct   the  
l

ance   at   least   30   cm   away   from   the  
c

amera.
"Front
 
camera".
"360°
 
camera".
"Rear
 
camera".
The view selected is displayed in the
instrument
 pan

el.
360 vision
The cameras located in the front and rear
bumpers and under the door mirrors are
activated and a reconstruction of the view from
above  
y
our  
v
ehicle  
i
n  
i
ts  
i
mmediate  
s
urroundings
 i

s   displayed   in   the   instrument   panel.
Opening
  a   door   or   the   tailgate   disturbs  
t

he   360   and   rear   views.
Fitting
  the   very   cold   conditions   screen  
a

ffects   the   image   transmitted   by   the  
f

ront   camera.
The display in the instrument panel
disappears
  above   9   mph   (15   km/h).
The
  image   transmitted   by   the   camera  
c

an   be   slightly   affected   by   the   presence  
o

f   the   very   cold   conditions   screen.
4
Driving

192
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Park Assist
This system provides active assistance with
parking.  It   detects   a   parking   space   then  
o

perates   the   steering   to   park   in   the   space.
It
  operates   the   steering   while   the   driver  
m

anages   the   accelerator,   brakes,   gears   and  
c

lutch   (manual   gearbox).   During   phases   of  
e

ntry   into   and   exit   from   a   parking   space,   the  
s

ystem provides visual and audible information
to
  the   driver   in   order   to   make   the   manoeuvres  
s

afe.   It   may   be   necessary   to   move   for wards  
a

nd   backwards   more   than   once. During
  a   manoeuvre   the   steering  
w

heel   turns   quickly:   do   not   hold   the  
s

teering   wheel,   do   not   place   your   hands  
b

etween   the   spokes   of   the   steering  
w

heel   and   take   care   with   loose   and  
b

ulky   clothing,   scarves,   handbags...  
T

here   is   a   risk   of   injury.
When
  Park   Assist   is   activated,   it  
p

revents   a   change   to   STOP   mode   of  
S

top   &   Start.   In   STOP   mode,   activation  
o

f   Park   Assist   restarts   the   engine.
The
  Park   Assist   system   cannot   in   any  
c

ircumstances replace the need for
vigilance
  on   the   part   of   the   driver.
The driver must remain in control
of
  their   vehicle   ensuring   that   the  
s

pace   remains   clear   throughout   the  
m

anoeuvre.
In some circumstances, the sensors
may not detect small obstacles located
in
  their   blind   spots.
The
  driver   can   take   control   at   any   time   by  
g

ripping   the   steering   wheel. The
  Park   Assist   system   provides   assistance   for  t
he   following   manoeuvres:
A.
 E

ntry   into   a   parallel   parking   space
B.
 E

xit   from   a   parallel   parking   space
C.
 B

ay
 par
kingThe
  Park   Assist   system   takes   control  
o

f   the   power   steering   for   a   maximum  
o

f   4   manoeuvre   cycles.   The   function  
i

s   deactivated   after   these   4   cycles.  
I

f   you   think   that   your   vehicle   is   not  
p

ositioned correctly, you should then
take
  control   of   the   steering   to   carry   out  
t

he   manoeuvre.
The
  Park   Assist   system   cannot   work  
w

ith   the   engine   off.
Driving

196
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Assistance in exiting from a
parallel parking space
F With the vehicle stationary, press this   button.
F

P
ress on " Exit parallel parking
space " in the touch screen
tablet. F
 
O
perate   the   direction   indicator   for   the   exit  
s

ide   chosen.
F  
E
ngage   reverse   or   for ward   gear   and  r
elease   the   steering   wheel.
F  
T
he   assisted   parking   manoeuvre   is   in  
p

rogress.   Without   exceeding   3   mph  
(

5 km/h),   move   for wards   and   backwards,  
a

ided   by   the   warnings   from   the   "Parking  
s

ensors" system, until the indication of the
end
  of   the   manoeuvre.
F
 
W

hen   you   want   to   leave   a   parallel   parking  
s

pace,   start   the   engine.
This indicator lamp comes on in
the instrument panel to confirm
activation   of   the   function. The
  manoeuvre   is   complete   when   the   vehicle's  
f

ront   wheels   are   clear   of   the   parking   space.
At the end of the manoeuvre, the indicator lamp
in   the   instrument   panel   goes   off,   accompanied  b
y   a   message   and   an   audible   signal.
The
  assistance   is   deactivated:   you   can   take  
ov

er   control.
Driving

199
C4-Picasso-II_en_Chap04_conduite_ed01-2016
The system is deactivated by pressing the control.
The
  system   is   deactivated   automatically:
-
 
o
n   switching   off   the   ignition,
-
 
i
f   the   engine   stalls,
-

i
f no manoeuvre is started within 5 minutes
of selection of the type of manoeuvre,
-
 
a
fter   a   prolonged   stop   of   the   vehicle   during  
a

manoeuvre,
-
 
i
f   the   road   wheel   anti-slip   regulation   (ASR)  
i

s
 t
riggered,
-
 
i
f   the   speed   of   the   vehicle   exceeds   the  
s

tated limit,
-

w
hen the driver interrupts movement of the
steering
 w

heel,
-

a
fter 4 manoeuvre cycles,
-
 
o
n   opening   the   driver's   door,
-

i
f one of the front wheels encounters an
obstacle.
The
  operation   indicator   lamp   goes   off   in   the  
i

nstrument   panel   and   a   message   is   displayed  
a

ccompanied   by   an   audible   signal.
The
  driver   should   then   take   back   control   of   the  
v

ehicle's
 s
teering.
Deactivation
The system is switched off automatically:
-  w hen   towing   a   trailer,   connected  
e

lectrically,
-
 
i
f   the   driver's   door   is   opened,
-

i
f the speed of the vehicle is above 42 mph
(70
  km/h).
To
  switch   the   system   of   for   a   prolonged   period,  
c

ontact a CITROËN dealer or a qualified
workshop.
Operating faults
In the event of a fault with the power
steering,   this   warning   lamp   flashes   in  
t

he instrument panel, accompanied
by
  a   message.
Contact a CITROËN dealer or a qualified
workshop.
Switching off
If the lateral distance between your
vehicle   and   the   space   is   too   great,   the s

ystem may not be able to measure the
space.
Anything
  projecting   beyond   the   envelope
 o

f the vehicle (a ladder on the roof, for
example)
  is   not   taken   into   account   by   the
 P

ark   Assist   system   during   a   manoeuvre.
In bad weather or in winter, ensure that
the sensors are not covered by road
dirt,
  ice   or   snow.
In the event of a fault, have the system
checked
  by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
If
 
the
 
system
 
is
 
deactivated
 
during
 
a
 
ma

noeuvre, the drive should reactivate
it
 
to
 
repeat
 
the
 
measurement. In
 
the
 
event
 
of
 
a
 
fault,
 
this
 
warning
 
l

amp flashes for a few seconds,
accompanied
 
by
 
an
 
audible
 
signal.
If
 
the
 
fault
 
occurs
 
during
 
the
 
use
 
o

f
 
the
 
system,
 
the
 
warning
 
lamp
 
g

oes off. High pressure jet washing
When
  washing   your   vehicle,   keep   the  
l

ance   at   least   30   cm   away   from   the  
sen

sors.
4
Driving

203
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Mirrors
Adjustment
F Move control A  to   the   right   or   to   the   left   to  s
elect   the   corresponding   mirror.
F

M
ove control B in all four directions to
adjust.
F

R
eturn control A   to   the   central   position.
Each
 
fitted
 
with
 
an
 
adjustable
 
mirror
 
glass
 
p

roviding
 
the
 
lateral
 
rear ward
 
vision
 
necessary
 
f

or
 
overtaking
 
or
 
parking.
They
 
can
 
also
 
be
 
folded
 
for
 
parking
 
in
 
confined
 
spa

ces.
Demisting - Defrosting
Door mirrors
Demisting-defrosting of the door m irrors   operates   with   the   engine  
r

unning,   by   switching   on   the   heated  
re

ar
 sc
reen. As a safety measure, the mirrors should
be
  adjusted   to   reduce   the   "blind   spots".
The
  objects   observed   are,   in   reality,  
c

loser   than   they   appear.
Take
  this   into   account   in   order   to  
c

orrectly   judge   the   distance   of   vehicles  
a

pproaching   from   behind.
Folding
F From  outside:   lock   the   vehicle   using   the  e
lectronic   key   or   the   Keyless   Entry   and  
S

tarting   system.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
If
  the   mirrors   are   folded   using   control   A,
they will not unfold when the vehicle is
unlocked.
  Pull   again   on   control   A.
The
  folding   and   unfolding   of   the   door  
m

irrors   using   the   remote   control   can   be  
d

eactivated by a CITROËN dealer or a
qualified
 w

orkshop.
F
 
F
rom   outside:   unlock   the   vehicle   using   the  
e

lectronic   key   or   the   Keyless   Entry   and  
S

tarting   system.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
Unfolding
If necessary, it is possible to fold the
mirrors manually.
For more information on Demisting -
Defrosting the rear screen
, refer to the
corresponding
 s

ection.
5
Lighting and visibility

204
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Rear view mirror
Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the   driver   caused   by   the   sun,   headlamps   from   other   vehicles...
Manual model
Adjustment
F A djust   the   mirror   so   that   the   glass   is  
d

irected   correctly   in   the   "day"   position.
In order to ensure optimum visibility
during
  your   manoeuvres,   the   mirror  
l

ightens   automatically   when   reverse  
g

ear
 i
s
 enga
ged.
Day / night position
F
 
P
ull   the   lever   to   change   to   the   "night"   anti-
dazzle
  position.
F
 
P
ush   the   lever   to   change   to   the   normal  
"

day"   position.
Automatic "electrochrome"
model
This system automatically and progressively changes   between   the   day   and   night   uses   by  
m

eans   of   a   sensor,   which   measures   the   light  
f

rom   the   rear   of   the   vehicle.
Automatic tilting in reverse gear
With the engine running, on engaging reverse gear,   the   mirror   glasses   tilt   downwards.
They
  return   to   their   initial   position:
-

a few seconds a fter c oming o ut o f r everse g ear,- once  the   speed   of   the   vehicle   exceeds  6 m
ph   (10   km/h),
-
 
o
n   switching   off   the   engine.
System
  which   provides   a   view   of   the   ground  
d

uring   parking   manoeuvres   in   reverse   gear.
This function can be deactivated in the Driving
menu.
F

Sel
ect the " Setting" tab then " Comfort"
and " Auto mirror dipping in reverse".
Lighting and visibility

207
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Displays
Illumination of the corresponding indicator lamp in the instrument panel confirms that the
lighting
  selected   is   on.
The rear sidelamps and direction
indicators
  are   located   on   the   tailgate.  
W

hen   they   are   on,   opening   the   tailgate  
a

utomatically transfers illumination to
the lamps located in the rear bumper, to
maintain
  the   safety   of   the   vehicle.
Main lighting
Lighting off (ignition off) /Daytime running lamps (engine running).
Automatic illumination of headlamps.
D aytime   running   lamps   /   Dipped  
b

eam   /   Main   beam.
Sidelamps.
Dipped
  or   main   beam   headlamps.
Turn
 
the
 
ring   A to place the desired symbol
against
 
the   mark.
Selection of main lighting mode
Model without AUTO lighting
Model with AUTO lighting Headlamp dipping
Pull the stalk B towards you to switch the
l ighting   between   dipped   and   main   beam  
h

eadlamps or to activate automatic headlamp
dipping.
In
  the   lighting   off   and   sidelamps   modes,   the  
d

river can switch on the main beam headlamps
temporarily
  ("headlamp   flash")   by   maintaining   a  
p

ull   on   the   stalk.
5
Lighting and visibility