diagram FIAT PANDA 2009 169 / 2.G 4x4 Supplement Manual

11
FIAT PANDA 4 x 4
ASSEMBLY DIAGRAM, fig. 25
The assembly diagram with the new tow
hook fixing points is given below.
The tow hook structure must be fastened
in the points identified by symbol Øus-
ing a total of 4 M8 screws and 2 M12
screws. Internal plates 1-fig. 25thickness
shall be 6 mm. The hook should be fas-
tened to the body avoiding any type of
drilling and trimming of the rear bumpers
that remains visible when the hook is re-
moved.
IMPORTANT It is compulsory to fasten,
at the same height as the tow hook and
in a clearly visible position, a label of suit-
able size and material with the following
information: MAX LOAD ON BALL 60 kg
After fitting, screw holes shall be sealed to
prevent an exhaust gas inlet.
fig. 25F0G0266m
existing screw
existing hole
existing hole
standard tow ball existing hole
existing
screw
existing hole
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 11