engine FIAT PANDA 2009 169 / 2.G Manual PDF

191KNOW
YOUR VEHICLE
SAFETY
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
TECHNICAL SPECIFICATIONS
IDENTIFICATION DATAIt is advisable to take note of the identification codes. The
identification data stamped and shown on the data plates
and their position are the following fig. 190:
1 Identification data plate.
2 Chassis marking.
3 Bodywork paint identification plate.
4 Engine marking.
IDENTIFICATION DATA PLATE fig. 191
The data plate is located on the left side of the boot floor
and it bears the following identification data:B
Type-approval number.
C
Vehicle type identification code.
CORRECT USE OF THE
CAR
D
Chassis manufacture progressive number.
E
Maximum allowed vehicle weight fully loaded.
F
Maximum allowed vehicle weight fully loaded with trail-
er.
G
Maximum allowed weight on first axle (front).
H
Maximum allowed weight on second axle (rear).
I
Engine type.
L
Bodywork version code.
M
Spare part number.
N
Smoke opacity index (for diesel engines).
F0Z0219m
fig. 190
F0Z0702m
fig. 191
191-214 PANDA EN 7-10-2009 14:17 Pagina 191

192
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
F0Z0114m
fig. 192
F0Z0220m
fig. 193
CHASSIS MARKING fig. 193
The plate is located on the right side of the boot floor and
it bears the following identification data:❒
vehicle type (ZFA 169000);
❒
the chassis progressive number.
ENGINE MARKING
Engine marking is stamped on the cylinder block and in-
cludes the model and the chassis progressive number. BODYWORK PAINT IDENTIFICATION PLATE
fig. 192
The plate is applied on the external tailgate post (left side)
and it bears the following data:
A
Paint manufacturer.
B
Colour name.
C
Fiat colour code.
D
Paint respray and touch-up code.
191-214 PANDA EN 7-10-2009 14:17 Pagina 192

193KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
ENGINE CODE – BODYWORK VERSIONSVersions Engine type code Bodywork version code
1.1
Actual – Active187A1000
(4-seat – Euro 3)169AXA1A 0A
(5-seat – Euro 3)169AXA1A 0AB
(4-seat – Euro 4)169AXA1A 0AC
(5-seat – Euro 4)169AXA1A 0AD
1.2
Dynamic – Emotion188A4000
(4-seat – Euro 3)169AXB1A 0B
(5-seat – Euro 3)169AXB1A 0BB
(4-seat – Euro 4)169AXB1A 0BC
(5-seat – Euro 4)169AXB1A 0BD
(*) Eco
(4-seat – Euro 4)169AXB1A 0BE(5-seat – Euro 4)169AXB1A 0BF
(4-seat – Euro 5)
169A4000169AXF1A 08(5-seat – Euro 5)169AXF1A 08B
1.3 Multijet 70 HP
Dynamic – Emotion188A8000
(4-seat – Euro 4)169AXC1A 0D(5-seat – Euro 4)169AXC1A 0DB
1.3 Multijet 75 HP (with DPF)
Dynamic – Emotion169A1000
(4-seat – Euro 4)169AXD1A 0GC(5-seat – Euro 4)169AXD1A 0GD
(*) Extended ratios to reduce CO
2
191-214 PANDA EN 7-10-2009 14:17 Pagina 193

187A1000
Otto
4 in line
70 × 72
1108
9.6 : 1
40
54
5000
88
9.0
2750
NGK DCPR7E-N-10
BOSCH YR7DEU
Unleaded petrol
95 R.O.N.
169A1000
Diesel
4 in line
69.6 × 82
1248
17.6 : 1
55
75
4000
145
14.8
1500
–Diesel fuel for
motor vehicles
(EN 590 standard)
188A8000
Diesel
4 in line
69.6 × 82
1248
18 : 1
51
70
4000
145
14.8
1500
–Diesel fuel for
motor vehicles
(EN 590 standard)
169A4000
Otto
4 in line
70.8 × 78.86
1242
11.1 : 1
51
69
5500
102
10.4
3000NGK ZKR7A-10
Unleaded petrol
95 R.O.N.
188A4000
Otto
4 in line
70.8 × 78.86
1242
9.8 : 1
44
60
5000
102
10.4
2500
NGK DCPR7E-N-10
BOSCH YR7DEU
Unleaded petrol
95 R.O.N.
194
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
ENGINEGENERAL INFORMATIONType codeCycleNumber and layout of cylindersPiston bore and stroke mmTotal displacement cm
3
Compression ratio
Max power (EEC) kW
HP corresponding speed rpm
Max. torque (EEC) Nm
kgm corresponding speed rpm
Spark plugs Fuel
1.1 1.2
(Euro 4)1.2
(Euro 5)1.3 Multijet
70 HP1.3 Multijet
75 HP
191-214 PANDA EN 7-10-2009 14:17 Pagina 194

Mc Pherson independent wheels, mechanical cross member,
shock absorbers and coil springs; anti-roll bar for versions with electric power
steering.
torsion beam with interconnected wheels consisting of a torsion axle and
two tubular arms with shock absorbers and coil springs.rack and pinion with electric power steering (where provided)
9.1
disc (self-ventilating for 1.3 Multijet engine)
drum, self-centering shoes with one control cylinder for each wheel
controlled by hand lever, working on rear brakes
196
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
SUSPENSIONS
1.1 – 1.2 – 1.3 Multijet
Front
RearBRAKES
1.1 – 1.2 – 1.3 Multijet
Service brakes:
– front– rear
Parking brake
IMPORTANT Water, ice and antifreeze salt sprinkled on the roads may deposit on the brake discs reducing braking efficiency the
first time the brakes are applied.STEERING
1.1 – 1.2 – 1.3 Multijet
Type
Steering circle (kerb to kerb) m
191-214 PANDA EN 7-10-2009 14:17 Pagina 196

Unleaded petrol with no less
than 95 R.O.N.
(▲)Diesel fuel for motor vehi-
cles (EN 590 standard)
Mixture of 50% distilled water
and PARAFLU
UP
50% (❑)
SELENIA 20K
(●) SELENIA WR
TUTELA CAR ZC 75 SYNTH
TUTELA TOP 4
Mixture of water and
TUTELA PROFESSIONAL SC
35
203KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
35 (▲)
5 (▲)
4.6
2.8 (●)
3.0 (●)
1.65
0.55
0.40
1.8
35
5
4.6
2.5
2.8
1.65
0.55
0.40
1.8
35
5
4.6
3.1
3.5
1.65
0.55
0.40
1.8
CAPACITIES
1.1 1.2 1.3 Specified fuels and
Multijet recommended products
Fuel tank: litres
including a reserve of: litresEngine cooling system:
litres
Engine sump: litres
Engine sump and filter: litres
Gearbox/differential casing:
litres
Hydraulic brake circuit:
– with ABS kg
– without ABS kg
Windscreen and rear window
washer fluid reservoir: litres
(❑) When the vehicle is used under particularly harsh climate conditions, we recommend using a mixture of 60% PARAFLU
UP
and 40% dem-
ineralised water.
191-214 PANDA EN 7-10-2009 14:18 Pagina 203

Synthetic base lubricants
SAE 5W-40 ACEA C3 grade.
FIAT 9.55535- S2 specifications
Synthetic base lubricants SAE 5W-40 grade
FIAT 9.55535- N2specifications
According to
Scheduled
Servicing
Programme
According to
Scheduled
Servicing
Programme
SELENIA K P.E.Contractual
Technical Reference
No. F603.C07SELENIA WRContractual
Technical Reference
No. F515.D06
FLUIDS AND LUBRICANTSRECOMMENDED PRODUCTS AND SPECIFICATIONSUse Quality specifications of fluids and lubricants Fluids and lubricants Interval
for correct car operation genuine for replacement
Lubricants for
petrol enginesLubricants for
diesel engines For diesel engines, in the event of an emergency in which the original products are not available, lubricants with at
least ACEA B4 performance are acceptable; however, in this case optimum engine performance is not guaranteed
and the lubricant should be replaced as soon as possible at a Fiat Dealership.
The use of products with features lower than ACEA C3 – SAE 5W-40 for petrol engines and ACEA B4 – SAE 5W -40
for diesel engines could cause damage to the engine, which are not covered by the warranty.
204
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
191-214 PANDA EN 7-10-2009 14:18 Pagina 204

Front
mechanicalgear-box
and differentials
Rear differential
4×4 versions
Wheel side
constant velocity
joints
Differential side
constant velocity
joints
Hydraulic brakes
and hydraulic
clutch controls
Cooling circuits Util-
isation percentage:
50% water
50% PARAFLU
UP
To be mixed with
diesel (25 cc per
10 litres)
To be used undiluted
or diluted in wind-
screen/rear window
washer/ wiper systems
Synthetic lubricant, SAE 75W-85 grade.
FIAT 9.55550-MX3specifications
Synthetic lubricant, SAE 75W-85 grade.
FIAT 9.55550-DA4specifications
Molybdenum disulphide grease for high tempera-
tures. Consistency NLGI 1-2 FIAT 9.55580speci-
fications
Polyurea based synthetic grease for high tempera-
tures. Consistency NLGI 2. FIAT 9.55580specifi-
cations
Synthetic fluid for brake and clutch systems. It pass-
es the specifications: FMVSS no. 116 DOT 4,
ISO 4925, SAE J 1704. FIAT 9.55597 specifications
Red protective agent with antifreeze action, based
on inhibited monoethylene glycol with organic for-
mula. It passes CUNA NC 956-16, ASTM D 3306
specifications. FIAT 9.55523specifications
Antifreeze additive for diesel fuel, protecting
Diesel engines
Mixture of alcohol and surfactants
CUNA NC 956-11. FIAT 9.55522specifications
TUTELA CAR
TECHNYX Contractual Technical
Reference no. F010.B05TUTELA CAR
CROSS Contractual Technical
Reference no. F804.D08TUTELA ALL
STARContractual Technical
Reference no. F702.G07TUTELA STAR
325Contractual Technical
Reference no. F301.D03TUTELA TOP 4Contractual Technical
Reference no. F001.A93PARAFLU
UP
Contractual Technical
Reference no. F101.M01TUTELA DIESEL
ARTContractual Technical
Reference no. F601.L06TUTELA PROFES-
SIONAL SC 35Contractual Technical
Reference no. F201.D02
Use Quality specifications of fluids and lubricants Fluids and lubricants Applications
for correct car operation recommended
Lubricants and
greases for drive transmission
systemBrake fluidProtective agent
for radiatorsFuel additiveWindscreen/
rear screen
washer fluidIMPORTANT Do not use fluids with different specifications for topping-up or mixing
205KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
191-214 PANDA EN 7-10-2009 14:18 Pagina 205

209CONOSCENZA
DELLA
VETTURA
SICUREZZA
AVVIAMENTO
E GUIDA
SPIE E
MESSAGGI
IN EMERGENZAMANUTENZIONE
E CURADATI TECNICIINDICE
PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF ITS LIFEFiat has been committed for many years to safeguarding the environment through the constant improvement of its pro-
duction processes and manufacturing products that are increasingly compatible with nature.
To grant customers the best possible service in terms of respecting environmental laws and in response to European
Directive 2000/53/EC governing vehicles at the end of their life, Fiat is offering all customers the opportunity of hand-
ing over their vehicle* at the end of its life without incurring any additional costs.
The European Directive sets out that when the vehicle is handed over the last keeper or owner should not incur any
expenses as a result of its market value.
In particular, in almost all European Union countries, until 1st January 2007, vehicles registered after 1st July 2002 will
be collected free of charge, whilst from 2007 collection will be free of charge irrespective of the year of registration
as long as the vehicle contains its basic components (in particular, the engine and bodywork) and has no additional
waste.
To hand your vehicle over at the end of its life without extra cost, contact a Fiat Dealership or authorised collection
and scrapping centres.
These centres have been carefully chosen to offer high quality service for the collection, treatment and recycling of
vehicles at their end of life, respecting the surrounding environment.
You can find further information on these collection and scrapping centres either from a Fiat and Fiat Commercial
Vehicle Dealership or by calling the toll-free number 00800 3428 0000 or on the Fiat website.
191-214 PANDA EN 7-10-2009 14:18 Pagina 209

®
Always ask your mechanic for
®
In the heart of your engine.
191-214 PANDA EN 7-10-2009 14:18 Pagina 210