lock FORD AEROSTAR 1997 1.G User Guide

59
Controls and Features
%*
[CF00050(ALL)01/96]
The main controls for the climate control system,
clock, and radio are on the instrument panel.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

74
*
[CF01340(ALL)01/96]
Clock Controls on Electronic
Radios
[CF01345(ALL)04/96]
The electronic radios have a built-in clock. For
complete operating instructions, refer to the
Electronic Sound Systemschapter in this Owner
Guide.
*
[CF02100(ALL)01/96]
Ignition
%*
[CF02110(ALL)01/96]
Understanding the Positions of the Ignition
*
[CF02120(ALL)01/96]
quarter page art:0020004-B
The positions of the key in the ignition lock cylinder.
%*
[CF02130(ALL)04/96]
ACCESSORY allows some of your vehicle's
electrical accessories such as the radio and the
windshield wipers to operate while the engine is
not running.
*
[CF02135(ALL)01/96]
LOCK locks the steering wheel and gearshift
lever.
*
[CF02140(ALL)01/96]
LOCK is the only position that allows you to
remove the key. The LOCK feature helps to
protect your vehicle from theft.
*
[CF02150(ALL)01/96]
If your key is stuck in the LOCK position and
will not turn, move your steering wheel left or
right until the key turns freely.
*
[CF02160(ALL)01/96]
OFF allows you to shut off the engine and all
accessories without locking the steering wheel or
the automatic transmission gearshift lever.
*
[CF02170(ALL)01/96]
ON allows you to test your vehicle's warning
lights (except the brake system warning light) to
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

79
%*
[CF06200(ALL)05/96]
Tilt Steering (If equipped)
*
[CF06350(ALL)02/96]
RWARNING
Never adjust the steering wheel when the
vehicle is moving.
[CF06500(ALL)01/96]
one third page art:0020089-C
Turn signal and tilt steering release lever
*
[CF06750(ALL)01/96]
To change the position of the steering wheel,
pull the release lever on the column toward you.
Tip the steering wheel to the desired position.
Release the lever to lock the steering wheel in
place.
*
[CF07250(ALL)01/96]
Be sure the steering wheel locks in a notch. It is
not infinitely adjustable. Do not adjust the
steering wheel while the vehicle is in motion.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

84
%*
[CF20601(ALL)02/96]
Doors
*
[CF20701(ALL)01/96]
Door Handles and Locks
[CF21000(ALL)05/96]
half page art:0020178-C
Inside handles
[CF21401(ALL)05/96]
one third page art:0020834-B
Outside handles and locks
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

85 %
*
[CF21409(ALL)04/96]
Anti-theft front door lock knobs
*
[CF21901(ALL)01/96]
Anti-theft lock knobs are designed to preclude
unlocking the door by pulling up on the bullet
type lock knob. To unlock and open the front
door from the inside of the vehicle, pull on the
inside door handle.
*
[CF23801(ALL)01/96]
Sliding Door
[CF23901(ALL)01/96]
With the door unlocked, unlatch the sliding door
by pulling the inside handle to the rear, or by
pulling the outside handle out and rearward. To
close, push the inside handle forward or pull the
outside handle forward.
[CF24101(ALL)01/96]
quarter page art:0020188-B
Sliding door handles
% [CF24300(ALL)04/96]
Liftgate
*
[CF24301(ALL)01/96]
Liftgate opening procedure
[CF24401(ALL)01/96]
1. Insert the key into the lock and turn it
counterclockwise. You can also unlock the
latch (but not release it) with the power door
lock system (if equipped).
*
[CF24500(ALL)01/96]
2. Reach under the license plate light shield
and release the liftgate latch by squeezing
the paddle handle rearward.
[CF24600(ALL)01/96]
3. To make the gate swing up to the fully
opened position, pull back and upward on
the latch paddle handle.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

86 [CF24800(ALL)01/96]
one third page art:0020190-BOpening the liftgate
[CF25300(ALL)04/96]
Make certain that you close the liftgate door and
window before driving your vehicle. If you do
not, possible damage may occur to the liftgate
door lift cylinders and attaching hardware.
*
[CF25400(ALL)01/96]
RWARNING
Make sure that the liftgate door and/or
window are closed to prevent exhaust
fumes from being drawn into the vehicle.
This will also prevent passengers and
cargo from falling out. If you must drive
with the liftgate door or window open,
keep the vents open so outside air comes
into the vehicle.
*
[CF25500(ALL)01/96]
Liftgate closing procedure
*
[CF25600(ALL)01/96]
1. To make the liftgate swing downward, reach
up and pull the lower edge of the liftgate (or
the loop handle on the inner trim panel of
vehicles with this option) and pull
downward.
*
[CF25700(ALL)01/96]
2. When you have pulled down the liftgate
enough so that you can reach the license
plate light shield, push the shield down and
forward to close the latch and liftgate. At
this point, the latch is not locked.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

87 [CF25800(ALL)01/96]
3. You can lock the liftgate latch by pushing
down the lock button before you pull down
and close the liftgate. You can also lock the
liftgate latch by inserting your vehicle's door
key and turning it clockwise after you have
closed the liftgate, or by using the power
door locks (if equipped).
*
[CF25900(ALL)01/96]
The liftgate area is only intended for cargo, not
passengers. You can open and close the liftgate
from outside the vehicle. It cannot be opened
from inside the cargo area.
[CF28800(ALL)01/96]
Dual Rear Cargo Door (If equipped)
[CF29300(ALL)01/96]
quarter page art:0020200-A
Opening the right rear door
[CF29400(ALL)01/96]
To open the left rear door, open the right rear
door and then pull up on the tee-shaped handle
located on the inside of the left rear door.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

88 [CF29700(ALL)01/96]When closing the dual rear cargo doors,
remember to close the left rear door first.
[CF29801(ALL)04/96]
RWARNING
Do not operate your vehicle with the rear
double doors open.
%*
[CF30100(ALL)01/96]
Power Door Locks (If equipped)
[CF30200(ALL)01/96]
The power door lock switches are located in the
front doors. To lock all doors push the switch
marked LOCK. To unlock all doors push the
switch marked UNLOCK.
[CF30300(ALL)04/96]
Memory lock (sliding door)
[CF30401(ALL)01/96]
Your vehicle has a sliding door memory lock
feature that does not require the sliding door to
be closed before using the power locks. The
locking function will activate after the door is
closed.
*
[CF30701(ALL)01/96]
The manual door locks will override the power
door lock controls.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

89 [CF30801(ALL)01/96]
quarter page art:0020201-C
Power door lock controls
%*
[CF31000(ALL)04/96]
Windows
[CF31500(ALL)03/96]
Sliding side windows
[CF31510(ALL)06/96]
To open or close the sliding side windows,
follow the instructions listed below.
[CF31520(ALL)06/96]
Opening the sliding window
[CF31530(ALL)06/96]
1. To open the window, pull the rear portion
of the latch handle rearward.
[CF31540(ALL)06/96]
2. Slide the window open.
[CF31545(ALL)06/96]
Closing the sliding window
[CF31550(ALL)06/96]
1. To close the window, push the latch handle
toward the front of the vehicle.
[CF31560(ALL)06/96]
2. Slide the window forward to engage the
latch handle on the striker.
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996

100 [SS00225(ALL)04/96]To install the rear bucket seat:
[SS00230(ALL)01/96]
1. Lift the seat assembly into the vehicle and
drop the front and rear floor hooks into the
floor wells at a point just behind the floor
attachment pins.
[SS00235(ALL)01/96]
2. Rotate the seat latch handle forward, causing
the J hook to engage over the front of the
foremost well retainer.
[SS00240(ALL)01/96]
3. For right hand seats, continue rotating the
seat latch handle until it comes to a
complete stop on the top of the tube. This
will cause the seat assembly to slide forward,
engaging the front and rear floor hooks with
the floor well retainers.
[SS00245(ALL)01/96]
For left hand seats, push the seat latch
handle downward to a full stop. This locks
the seat in position. Before you engage the
safety belt, be sure it is not twisted. Remove
any twist, then insert the tongue end of the
detachable anchor into the detachable anchor
until you hear a ªsnapº and feel the latch
engage.
*
[SS00250(ALL)02/96]
RWARNING
Check to see that the seat and seatback
are latched securely in position. Keep
floor area free of objects that would
prevent proper seat engagement. Never
attempt to adjust the seat while the
vehicle is in motion.
[SS00255(ALL)05/96]
Two and Three Passenger Bench Seats and
Seat Bed Assemblies (If Equipped)
[SS00260(ALL)01/96]
NOTE: If your vehicle is equipped with a
Built-In Child Seat, make sure the
child seat is properly stowed before
operating the seat bed.
File:06cpssa.ex
Update:Thu Jun 13 08:56:07 1996