INFINITI QX4 2001 Factory Service Manual

INFINITI QX4 2001 Factory Service Manual QX4 2001 INFINITI INFINITI https://www.carmanualsonline.info/img/42/57027/w960_57027-0.png INFINITI QX4 2001 Factory Service Manual
Trending: reset sun roof, headlamp, oil, wiper size, oil pressure, turn signal, change time

Page 711 of 2395

INFINITI QX4 2001  Factory Service Manual ICrankshaft position sensor (REF)
ICrankshaft position sensor (POS)
IMass air flow sensor
MALFUNCTION CNBEC0430S03IHarness or connectors
(The throttle position sensor circuit is open or shorted.)
IInt

Page 712 of 2395

INFINITI QX4 2001  Factory Service Manual SEF058Y
PROCEDURE FOR MALFUNCTION BNBEC0078S02With CONSULT-IINBEC0078S02011) Turn ignition switch ªONº.
2) Select ªDATA MONITORº mode with CONSULT-II.
3) Start engine and let it idle for at least

Page 713 of 2395

INFINITI QX4 2001  Factory Service Manual SEF174Z
8) Select ªAUTO TRIGº in ªDATA MONITORº mode with CON-
SULT-II.
SEF178Y
9) Maintain the following conditions for at least 10 consecutive
seconds.
ENG SPEED More than 2,000 rpm
MAS A/F SE-B

Page 714 of 2395

INFINITI QX4 2001  Factory Service Manual SEF305X
With GST=NBEC0078S03021) Start engine and warm it up to normal operating temperature.
2) Maintain the following conditions for at least 10 consecutive
seconds.
Gear position Suitable position

Page 715 of 2395

INFINITI QX4 2001  Factory Service Manual Wiring DiagramNBEC0079
MEC946C
DTC P0120 THROTTLE POSITION SENSOR
Wiring Diagram
EC-180

Page 716 of 2395

INFINITI QX4 2001  Factory Service Manual Diagnostic ProcedureNBEC0080
1 INSPECTION START
Which malfunction A, B or C is duplicated?
MTBL0066
TypeA,BorC
TypeAor B©GO TO 4.
Type C©GO TO 2.
2 ADJUST THROTTLE POSITION SENSOR
Check the followin

Page 717 of 2395

INFINITI QX4 2001  Factory Service Manual 5 CHECK THROTTLE POSITION SENSOR POWER SUPPLY CIRCUIT
1. Disconnect throttle position sensor harness connector.
SEF944Y
2. Turn ignition switch ªONº.
3. Check voltage between throttle position senso

Page 718 of 2395

INFINITI QX4 2001  Factory Service Manual 8 CHECK THROTTLE POSITION SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT
1. Disconnect ECM harness connector.
2. Check harness continuity between ECM terminal 91 and throttle position sensor terminal

Page 719 of 2395

INFINITI QX4 2001  Factory Service Manual 10 CHECK THROTTLE POSITION SENSOR
Without CONSULT-II
1. Start engine and warm it up to normal operating temperature.
2. Stop engine (ignition switch OFF).
3. Remove the vacuum hose connected to the th

Page 720 of 2395

INFINITI QX4 2001  Factory Service Manual 12 CHECK MASS AIR FLOW SENSOR
1. Reconnect harness connectors disconneted.
2. Start engine and warm it up to normal operating temperature.
3. Check voltage between ECM terminal 61 (Mass air flow senso
Trending: vin, wheel bolt torque, parking brake, fuel consumption, Battery, oil dipstick, airbag