INFINITI QX56 2006 Factory Service Manual

AT-66
TROUBLE DIAGNOSIS
Revision: November 20092006 QX56
18
Slips/Will
Not
engage When
“D ” position,
remains in 1st gear. ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT- 1 3 2
3. Direct clutch solenoid valve AT- 1 4 7
4. Line pressure test AT- 5 2
5. CAN communication lineAT- 9 6
6. Control valve with TCMAT- 2 3 0
OFF vehicle7.
AT- 2 8 4
3rd one-way clutch AT- 2 8 4
8. 1st one-way clutch AT- 2 9 1
9. Gear systemAT- 2 5 0
10. Reverse brakeAT- 2 6 4
11. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT- 2 6 4
12. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8
.) AT- 2 6 4
19
When
“D ” position,
remains in 2nd gear. ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTR
AT- 111 ,
AT-132
3. Low coast brake solenoid valve AT- 1 5 5
4. Line pressure test AT- 5 2
5. CAN communication lineAT- 9 6
6. Control valve with TCMAT- 2 3 0
OFF vehicle7. 3rd one-way clutch
AT- 2 8 4
8. Gear systemAT- 2 5 0
9. Direct clutchAT- 2 9 8
10. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT- 1 7
, AT- 1 8
.) AT- 2 6 4
No. Items
Symptom Condition Diagnostic ItemReference
page

TROUBLE DIAGNOSISAT-67
DE
F
G H
I
J
K L
M A
B
AT
Revision: November 2009 2006 QX56
20
Slips/Will
Not
engage When
“D ” position,
remains in 3rd gear. ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT-132
3. Line pressure test AT- 5 2
4. CAN communication lineAT- 9 6
5. Control valve with TCMAT-230
OFF vehicle6. 3rd one-way clutch
AT-284
7. Gear systemAT-250
8. High and low reverse clutchAT-296
9. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT-264
10. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT- 1 7
, AT- 1 8
.) AT-264
21
When
“D ” position,
remains in 4th gear. ON vehicle1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT-132
3. ATF pressure switch 3 and input clutch solenoid valve AT-161,
AT-139
4. ATF pressure switch 5 and direct clutch solenoid valve AT-163,
AT-
147
5. ATF pressure switch 6, high and low reverse clutch sole-
noid valve AT-165
,
AT-151
6. Low coast brake solenoid valve AT-155
7. Front brake solenoid valveAT-143
8. Line pressure test AT- 5 2
9. CAN communication lineAT- 9 6
10. Control valve with TCMAT-230
OFF vehicle11. Input clutch
AT-28612. Gear systemAT-250
13. High and low reverse clutchAT-296
14. Direct clutchAT-298
No. ItemsSymptom Condition Diagnostic ItemReference
page

AT-68
TROUBLE DIAGNOSIS
Revision: November 20092006 QX56
22
Slips/Will
Not
Engage When
“D ” position,
remains in 5th gear. ON vehicle1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT- 1 3 2

3. ATF pressure switch 1 and front brake solenoid valve AT- 1 5 9
,
AT- 1 4 3
4. Line pressure test AT- 5 2
5. CAN communication lineAT- 9 6
6. Control valve with TCMAT- 2 3 0
OFF vehicle7. Front brake (brake band)
AT- 2 6 48. Input clutchAT- 2 8 6
9. Gear systemAT- 2 5 0
10. High and low reverse clutchAT- 2 9 6
23Vehicle cannot be
started from D
1 .
Refer to AT-191, "
Vehi-
cle Cannot Be Started
From D1" . ON vehicle
1. Fluid level and state
AT- 5 1
2. Accelerator pedal position sensorAT- 1 2 4
3. Line pressure test AT- 5 2
4. CAN communication lineAT- 9 6
5. Control valve with TCMAT- 2 3 0
OFF vehicle6. Torque converter
AT- 2 6 4
7. Oil pump assemblyAT- 2 8 2
8. 3rd one-way clutchAT- 2 8 4
9. 1st one-way clutchAT- 2 9 1
10. Gear systemAT- 2 5 0
11. Reverse brakeAT- 2 6 4
12. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT- 2 6 4
13. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8
.) AT- 2 6 4
24Does not lock-up.
Refer to
AT-203, "A/T
Does Not Perform
Lock-up" . ON vehicle1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Engine speed signalAT- 11 6
4. Turbine revolution sensorAT- 1 0 9
5. Torque converter clutch solenoid valve AT- 11 8
6. CAN communication line AT- 9 6
7. Control valve with TCMAT- 2 3 0
OFF vehicle8. Torque converter
AT- 2 6 49. Oil pump assemblyAT- 2 8 2
No. ItemsSymptom Condition Diagnostic ItemReference
page

TROUBLE DIAGNOSISAT-69
DE
F
G H
I
J
K L
M A
B
AT
Revision: November 2009 2006 QX5625
Slips/Will
Not
engage Does not hold lock-up
condition.
Refer to
AT-205, "A/T
Does Not Hold Lock-
up Condition" . ON vehicle 1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Engine speed signalAT- 11 6
4. Turbine revolution sensorAT-109
5. Torque converter clutch solenoid valve AT- 11 8
6. CAN communication line AT- 9 6
7. Control valve with TCMAT-230
OFF vehicle8. Torque converter
AT-2649. Oil pump assemblyAT-282
26Lock-up is not
released.
Refer to
AT-207,
"Lock-up Is Not
Released" . ON vehicle1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Engine speed signalAT- 11 6
4. Turbine revolution sensorAT-109
5. Torque converter clutch solenoid valve AT- 11 8
6. CAN communication line AT- 9 6
7. Control valve with TCMAT-230
OFF vehicle8. Torque converter
AT-2649. Oil pump assemblyAT-282
27No shock at all or the
clutch slips when
vehicle changes
speed D
1 →
D2 . ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT-132
3. ATF pressure switch 5 and direct clutch solenoid valve AT-163,
AT-147
4. CAN communication line AT- 9 6
5. Line pressure testAT- 5 2
6. Control valve with TCMAT-230
OFF vehicle7. Torque converter
AT-264
8. Oil pump assemblyAT-282
9. 3rd one-way clutchAT-284
10. Gear systemAT-250
11. Direct clutchAT-298
12. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT- 1 7
, AT- 1 8
.) AT-264
No. Items
Symptom Condition Diagnostic ItemReference
page

AT-70
TROUBLE DIAGNOSIS
Revision: November 20092006 QX56
28
Slips/Will
Not
engage No shock at all or the
clutch slips when
vehicle changes
speed D
2
→ D3 . ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT- 1 3 2
3. ATF pressure switch 6, high and low reverse clutch sole-
noid valve AT- 1 6 5,
AT- 1 5 1
4. CAN communication line AT- 9 6
5. Line pressure testAT- 5 2
6. Control valve with TCMAT- 2 3 0
OFF vehicle7. Torque converter
AT- 2 6 4
8. Oil pump assemblyAT- 2 8 2
9. 3rd one-way clutchAT- 2 8 4
10. Gear systemAT- 2 5 0
11. High and low reverse clutchAT- 2 9 6
12. Forward one- way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT- 2 6 4
13. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8
.) AT- 2 6 4
29No shock at all or the
clutch slips when
vehicle changes
speed D
3
→ D4 . ON vehicle 1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT- 1 3 2
3. ATF pressure switch 3 and input clutch solenoid valve AT- 1 6 1,
AT- 1 3 9

4. ATF pressure switch 1 and front brake solenoid valve AT- 1 5 9
,
AT- 1 4 3
5. CAN communication line AT- 9 6
6. Line pressure testAT- 5 2
7. Control valve with TCMAT- 2 3 0
OFF vehicle8. Torque converter
AT- 2 6 4
9. Oil pump assemblyAT- 2 8 2
10. Input clutchAT- 2 8 6
11. Gear systemAT- 2 5 0
12. High and low reverse clutchAT- 2 9 6
13. Direct clutchAT- 2 9 8
No. ItemsSymptom Condition Diagnostic ItemReference
page

TROUBLE DIAGNOSISAT-71
DE
F
G H
I
J
K L
M A
B
AT
Revision: November 2009 2006 QX56
30
Slips/Will
Not
engage No shock at all or the
clutch slips when
vehicle changes
speed D
4 →
D5 . ON vehicle 1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT-132
3. ATF pressure switch 1 and front brake solenoid valve AT-159,
AT-143
4. ATF pressure switch 5 and direct clutch solenoid valve AT-163,
AT-147
5. CAN communication line AT- 9 6
6. Line pressure testAT- 5 2
7. Control valve with TCMAT-230
OFF vehicle8. Torque converter
AT-264
9. Oil pump assemblyAT-282
10. Front brake (brake band)AT-264
11. Input clutchAT-286
12. Gear systemAT-250
13. High and low reverse clutchAT-296
31When you press the
accelerator pedal and
shift speed D5 →
D4
the engine idles or the
transmission slips. ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT-132
3. ATF pressure switch 1 and front brake solenoid valve AT-159,
AT-143
4. ATF pressure switch 5 and direct clutch solenoid valve AT-163,
AT-147
5. CAN communication line AT- 9 6
6. Line pressure testAT- 5 2
7. Control valve with TCMAT-230
OFF vehicle8. Torque converter
AT-264
9. Oil pump assemblyAT-282
10. Input clutchAT-286
11. Gear systemAT-250
12. High and low reverse clutchAT-296
13. Direct clutchAT-298
No. ItemsSymptom Condition Diagnostic ItemReference
page

AT-72
TROUBLE DIAGNOSIS
Revision: November 20092006 QX56
32
Slips/Will
Not
engage When you press the
accelerator pedal and
shift speed D4
→ D3
the engine idles or the
transmission slips. ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT- 1 3 2
3. ATF pressure switch 3 and input clutch solenoid valve AT- 1 6 1,
AT- 1 3 9
4. ATF pressure switch 1 and front brake solenoid valve AT- 1 5 9,
AT- 1 4 3
5. CAN communication line AT- 9 6
6. Line pressure testAT- 5 2
7. Control valve with TCMAT- 2 3 0
OFF vehicle8. Torque converter
AT- 2 6 4
9. Oil pump assemblyAT- 2 8 2
10. 3rd one-way clutchAT- 2 8 4
11. Gear systemAT- 2 5 0
12. High and low reverse clutchAT- 2 9 6
13. Forward one- way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT- 2 6 4
14. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8
.) AT- 2 6 4
33When you press the
accelerator pedal and
shift speed D3
→ D2
the engine idles or the
transmission slips. ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT- 1 3 2
3. ATF pressure switch 6, high and low reverse clutch sole-
noid valve AT- 1 6 5,
AT- 1 5 1
4. ATF pressure switch 5 and direct clutch solenoid valve AT- 1 6 3,
AT- 1 4 7
5. CAN communication line AT- 9 6
6. Line pressure testAT- 5 2
7. Control valve with TCMAT- 2 3 0
OFF vehicle8. Torque converter
AT- 2 6 4
9. Oil pump assemblyAT- 2 8 2
10. 3rd one-way clutchAT- 2 8 4
11. Gear systemAT- 2 5 0
12. Direct clutchAT- 2 9 8
13. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT- 1 7
, AT- 1 8
.) AT- 2 6 4
No. Items
Symptom Condition Diagnostic ItemReference
page

TROUBLE DIAGNOSISAT-73
DE
F
G H
I
J
K L
M A
B
AT
Revision: November 2009 2006 QX56
34
Slips/Will
Not
Engage When you press the
accelerator pedal and
shift speed D2 →
D1
the engine idles or the
transmission slips. ON vehicle
1. Fluid level and state
AT- 5 1
2. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 111,
AT-132
3. ATF pressure switch 5 and direct clutch solenoid valve AT-163,
AT-147
4. CAN communication line AT- 9 6
5. Line pressure testAT- 5 2
6. Control valve with TCMAT-230
OFF vehicle7. Torque converter
AT-264
8. Oil pump assemblyAT-282
9. 3rd one-way clutchAT-284
10. 1st one-way clutchAT-291
11. Gear systemAT-250
12. Reverse brakeAT-264
13. Forward one- way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT-264
14. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT- 1 7
, AT- 1 8
.) AT-264
35With selector lever in
“
D ” position, accelera-
tion is extremely poor. ON vehicle
1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Accelerator pedal position sensorAT-124
4. CAN communication line AT- 9 6
5. PNP switchAT-105
6. Control cable adjustmentAT-227
7. Control valve with TCMAT-230
OFF vehicle8. Torque converter
AT-264
9. Oil pump assemblyAT-282
10. 1st one-way clutchAT-291
11. Gear systemAT-250
12. Reverse brakeAT-264
13. Forward one- way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT-264
14. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT- 1 7
, AT- 1 8
.) AT-264
No. Items
Symptom Condition Diagnostic ItemReference
page

AT-74
TROUBLE DIAGNOSIS
Revision: November 20092006 QX56
36
Slips/Will
Not
Engage With selector lever in
“
R ” position, accelera-
tion is extremely poor. ON vehicle1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Accelerator pedal position sensorAT- 1 2 4
4. ATF pressure switch 6, high and low reverse clutch sole-
noid valveAT- 1 6 5,
AT- 1 5 1
5. CAN communication line AT- 9 6
6. PNP switchAT- 1 0 5
7. Control cable adjustmentAT- 2 2 7
8. Control valve with TCMAT- 2 3 0
OFF vehicle9. Gear system
AT- 2 5 010. Output shaftAT- 2 6 4
11. Reverse brakeAT- 2 6 4
37While starting off by
accelerating in 1st,
engine races or slip-
page occurs. ON vehicle
1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Accelerator pedal position sensorAT- 1 2 4
4. CAN communication line AT- 9 6
5. Control valve with TCMAT- 2 3 0
OFF vehicle6. Torque converter
AT- 2 6 4
7. Oil pump assemblyAT- 2 8 2
8. 3rd one-way clutchAT- 2 8 4
9. 1st one-way clutchAT- 2 9 1
10. Gear systemAT- 2 5 0
11. Reverse brakeAT- 2 6 4
12. Forward one- way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT- 2 6 4
13. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8
.) AT- 2 6 4
38While accelerating in
2nd, engine races or
slippage occurs. ON vehicle
1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Accelerator pedal position sensorAT- 1 2 4
4. CAN communication line AT- 9 6
5. ATF pressure switch 5 and direct clutch solenoid valveAT- 1 6 3,
AT- 1 4 7
6. Control valve with TCM AT- 2 3 0
OFF vehicle7. Torque converter
AT- 2 6 4
8. Oil pump assemblyAT- 2 8 2
9. 3rd one-way clutchAT- 2 8 4
10. Gear systemAT- 2 5 0
11. Direct clutchAT- 2 9 8
12. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT- 1 7
, AT- 1 8
.) AT- 2 6 4
No. Items
Symptom Condition Diagnostic ItemReference
page

TROUBLE DIAGNOSISAT-75
DE
F
G H
I
J
K L
M A
B
AT
Revision: November 2009 2006 QX56
39
Slips/Will
Not
Engage While accelerating in
3rd, engine races or
slippage occurs.
ON vehicle
1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Accelerator pedal position sensorAT-124
4. CAN communication line AT- 9 6
5. ATF pressure switch 6, high and low reverse clutch sole-
noid valveAT-165,
AT-151

6. Control valve with TCM AT-230
OFF vehicle7. Torque converter
AT-264
8. Oil pump assemblyAT-282
9. 3rd one-way clutchAT-284
10. Gear systemAT-250
11. High and low reverse clutchAT-296
12. Forward one- way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 7
, AT- 1 8 .) AT-264
13. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT- 1 7
, AT- 1 8
.) AT-264
40While accelerating in
4th, engine races or
slippage occurs. ON vehicle
1. Fluid level and state
AT- 5 1
2. Line pressure testAT- 5 2
3. Accelerator pedal position sensorAT-124
4. CAN communication line AT- 9 6
5. ATF pressure switch 3 and input clutch solenoid valveAT-161,
AT-139
6. Control valve with TCM AT-230
OFF vehicle7. Torque converter
AT-264
8. Oil pump assemblyAT-282
9. Input clutchAT-286
10. Gear systemAT-250
11. High and low reverse clutchAT-296
12. Direct clutchAT-298
No. ItemsSymptom Condition Diagnostic ItemReference
page