brake fluid INFINITI QX56 2011 Factory Workshop Manual
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2011, Model line: QX56, Model: INFINITI QX56 2011Pages: 5598, PDF Size: 94.53 MB
Page 566 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)BRC-49
< ECU DIAGNOSIS INFORMATION > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C 111 5 When difference in wheel speed between any wheel and others is d](/img/42/57033/w960_57033-565.png "INFINITI QX56 2011 Factory Workshop Manual
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)BRC-49
< ECU DIAGNOSIS INFORMATION > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C 111 5 When difference in wheel speed between any wheel and others is d")
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)BRC-49
< ECU DIAGNOSIS INFORMATION > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C 111 5 When difference in wheel speed between any wheel and others is detected during
the vehicle is driven, because of installation of other tires than specified. The following functions are sus-
pended.
VDC function
TCS function
ABS function
hill start assist function
Brake limited slip differential
(BLSD) function
C 111 6
When stop lamp switch signal is not input when brake pedal depress.
When stop lamp switch signal is not input when stop lamp relay operates.
C 111 8
*1When a malfunction is detected in transfer control unit system.
C1120 When a malfunction is detec ted in front LH ABS IN valve.
The following functions are sus-
pended.
VDC function
TCS function
ABS function
EBD function
hill start assist function
Brake limited slip differential (BLSD) function
C1121 When a malfunction is detec
ted in front LH ABS OUT valve.
C1122 When a malfunction is detected in front RH ABS IN valve.
C1123 When a malfunction is det ected in front RH ABS OUT valve.
C1124 When a malfunction is detected in rear LH ABS IN valve.
C1125 When a malfunction is detected in rear LH ABS OUT valve.
C1126 When a malfunction is det ected in rear RH ABS IN valve.
C1127 When a malfunction is detected in rear RH ABS OUT valve.
C1130 When a malfunction is detected in ECM system. The following functions are sus-
pended.
VDC function
TCS function
hill start assist function
Brake limited slip differential
(BLSD) function
C1140 When a malfunction is detected in actuator relay. The following functions are sus-
pended.
VDC function
TCS function
ABS function
EBD function
hill start assist function
Brake limited slip differential
(BLSD) function
C1142
*2When a malfunction is detected in master cylinder pressure sensor or control pres-
sure sensor. The following functions are sus-
pended.
VDC function
TCS function
hill start assist function
Brake limited slip differential
(BLSD) function
C1143 When a malfunction is detected in steering angle sensor.
C1144 When neutral position adjustment of steering angle sensor is not complete.
C1145
When a malfunction is detected in yaw rate signal.
When yaw rate signal is not continuously received for 2 seconds or more.
When side G signal is not continuously received for 2 seconds or more.
When decel G signal is not continuously received for 2 seconds or more.
The following functions are sus-
pended.
VDC function
TCS function
ABS function
hill start assist function
Brake limited slip differential
(BLSD) function
C1146 When a malfunction is detected in side/decel G signal.
C1155
When brake fluid level low signal is detected.
When an open circuit is detected in brake fluid level switch circuit.
C1160 When calibration of yaw rate/side/decal G sensor is not complete.
C1164 When a malfunction is detected in cut valve 1. The following functions are sus- pended.
VDC function
TCS function
ABS function
EBD function
hill start assist function
Brake limited slip differential (BLSD) function
C1165 When a malfunction is detected in cut valve 2.
C1166 When a malfunction is detected in suction valve 1.
C1167 When a malfunction is detected in suction valve 2. DTC Malfunction detected condition Fail-safe condition
Revision: 2010 May2011 QX56
Page 567 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
BRC-50
< ECU DIAGNOSIS INFORMATION >[WITH VDC]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
*1: Models with 4WD System
*2: Models with Advanced Driver Assistance System
Protection FunctionINFOID:000](/img/42/57033/w960_57033-566.png "INFINITI QX56 2011 Factory Workshop Manual
BRC-50
< ECU DIAGNOSIS INFORMATION >[WITH VDC]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
*1: Models with 4WD System
*2: Models with Advanced Driver Assistance System
Protection FunctionINFOID:000")
BRC-50
< ECU DIAGNOSIS INFORMATION >[WITH VDC]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
*1: Models with 4WD System
*2: Models with Advanced Driver Assistance System
Protection FunctionINFOID:0000000006222581
The VDC warning lamp, ABS warning lamp and brake warning lamp turns ON and DTC “C118E” may be
detected in self-diagnosis result of “ABS” when the br
ake pedal is excessively operated, such as air bleeding.
This is not a system malfunction because this occurs due to the temporary decrease in accumulator fluid pres-
sure. The system returns to normal condition when the accu mulator fluid pressure reaches the specified pres-
sure with the ignition switch ON and the VDC warning lamp, ABS warning lamp, and brake warning lamp turn
OFF. After these steps, erase self-diagnos is results for “ABS” with CONSULT-III.
NOTE:
D T C “ C 1111 ” i s d e t e c t e d i n s e l f - d i agnosis results of “ABS” when the a ccumulator system has a malfunction.
DTC Inspection Priority ChartINFOID:0000000006222582
When multiple DTCs are displayed simultaneously, check one by one depending on the following priority list.
C1170 When the information in ABS actuator and electric unit (control unit) is not the same. The following functions are sus-
pended.
VDC function
TCS function
ABS function
hill start assist function
Brake limited slip differential
(BLSD) function
C118E When performing excessive brake pedal operation with the vehicle stopped. [When
accumulator fluid pressure reaches 11.43 MPa (114 bar, 116.6 kg/cm
2, 1657 psi) af-
ter reaching 17.3 MPa (173 bar, 176.5 kg/cm2, 2509 psi.] The following functions are sus-
pended.
VDC function
TCS function
ABS function
EBD function
hill start assist function
Brake limited slip differential
(BLSD) function
U1000 When CAN communication signal is not continuously received for 2 seconds or
more. The following functions are sus-
pended.
VDC function
TCS function
ABS function
hill start assist function
Brake limited slip differential
(BLSD) function
DTC Malfunction detected condition Fail-safe condition
DTC
VDC warning lamp
ABS warning lamp
Brake warning lamp Condition Description protection function
C118E ON When temporary decrease in accumulator fluid pres-
sure.
NOTE:
System is not malfunction. The following functions are suspended
temporarily
VDC function
TCS function
ABS function
EBD function
hill start assist function
Brake limited slip differential (BLSD)
function
Priority Detected item (DTC)
1 U1000 CAN COMM CIRCUIT
2 C1170 VARIANT CODING
Revision: 2010 May2011 QX56
Page 612 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
C1142 PRESS SENSORBRC-95
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C1142 PRESS SENSOR
DTC LogicINFOID:0000000006222617
DTC DETECTION LOGIC
*: Models with Advanced Driver](/img/42/57033/w960_57033-611.png "INFINITI QX56 2011 Factory Workshop Manual
C1142 PRESS SENSORBRC-95
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C1142 PRESS SENSOR
DTC LogicINFOID:0000000006222617
DTC DETECTION LOGIC
*: Models with Advanced Driver")
C1142 PRESS SENSORBRC-95
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C1142 PRESS SENSOR
DTC LogicINFOID:0000000006222617
DTC DETECTION LOGIC
*: Models with Advanced Driver Assistance System
DTC CONFIRMATION PROCEDURE
1.CHECK DTC DETECTION
With CONSULT-III.
1. Turn the ignition switch OFF to ON.
2. Perform self-diagnosis for “ABS”.
Is DTC
“C1142” detected?
YES >> Proceed to diagnosis procedure. Refer to BRC-95, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis ProcedureINFOID:0000000006222618
1.CHECK STOP LAMP SWITCH SUSTEM
Check stop lamp switch system. Refer to BRC-79, "
Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.CHECK BRAKE FLUID LEACKAGE
Check brake fluid leakage. Refer to BR-10, "
Inspection".
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace error-detected parts.
3.CHECK BRAKE PIPING
Check brake piping. Refer to BR-24, "
FRONT : Inspection" (front), BR-26, "REAR : Inspection" (rear).
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace error-detected parts.
4.CHECK BRAKE PEDAL
Check brake pedal. Refer to BR-21, "
Inspection and Adjustment".
Is the inspection result normal?
YES >> GO TO 5.
NO >> Repair or replace error-detected parts.
5.CHECK HYDRAULIC BOOSTER ASSEMBLY
Check hydraulic booster assembly. Refer to BR-32, "
Inspection and Adjustment".
Is the inspection result normal?
YES >> GO TO 6.
NO >> Repair or replace error-detected parts.
6.CHECK FRONT DISC BRAKE
Check front disc brake. Refer to BR-39, "
BRAKE CALIPER ASSEMBLY : Inspection".
DTC Display Item Malfunction detected condition Possible causes
C1142 PRESS SEN CIRCUIT When a malfunction is detected in master cylinder
pressure sensor or control pressure sensor
*. Stop lamp switch system
ABS actuator and electric unit
(control unit)
Brake system
Revision: 2010 May2011 QX56
Page 620 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
C1155 BRAKE FLUID LEVEL SWITCHBRC-103
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C1155 BRAKE FLUID LEVEL SWITCH
DTC LogicINFOID:0000000006222625
DTC DETECTION LOGIC
DTC CO](/img/42/57033/w960_57033-619.png "INFINITI QX56 2011 Factory Workshop Manual
C1155 BRAKE FLUID LEVEL SWITCHBRC-103
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C1155 BRAKE FLUID LEVEL SWITCH
DTC LogicINFOID:0000000006222625
DTC DETECTION LOGIC
DTC CO")
C1155 BRAKE FLUID LEVEL SWITCHBRC-103
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C1155 BRAKE FLUID LEVEL SWITCH
DTC LogicINFOID:0000000006222625
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK DTC DETECTION
With CONSULT-III.
1. Turn the ignition switch OFF to ON, and then wait 1 minute or more.
2. Perform self-diagnosis for “ABS”.
Is DTC
“C1155” detected?
YES >> Proceed to diagnosis procedure. Refer to BRC-103, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis ProcedureINFOID:0000000006222626
1.CHECK BRAKE FLUID LEVEL
1. Turn the ignition switch OFF.
2. Check brake fluid level. Refer to BR-10, "
Inspection".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Refill brake fluid. Refer to BR-11, "
Refilling".
2.CHECK BRAKE FLUID LEVEL SWITCH HARNESS
1. Disconnect brake fluid level switch harness connector.
2. Disconnect ABS actuator and electric unit (control unit) harness connector.
3. Check continuity between brake fluid level switch harness connector and ABS actuator and electric unit
(control unit) harness connector.
4. Check continuity between brake fluid level switch harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace error-detected parts.
3.CHECK BRAKE FLUID LEVEL SWITCH GROUND
Check continuity between brake fluid level switch harness connector and ground.
DTC Display Item Malfunction detected condition Possible causes
C1155 BR FLUID LEVEL LOW When brake fluid level low signal is detected.
When an open circuit is detected in brake fluid level
switch circuit. Harness or connector
ABS actuator and electric unit
(control unit)
Brake fluid level switch
Brake fluid level switch ABS actuator and electric unit (control unit) Continuity
Connector Terminal Connector Terminal
E47 1 E36 13 Existed
Brake fluid level switch —Continuity
Connector Terminal
E47 1 Ground Not existed
Revision: 2010 May2011 QX56
Page 621 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
BRC-104
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
C1155 BRAKE FLUID LEVEL SWITCH
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace error-detected parts.
4.CHECK BRAKE FLUID LEVEL SWI](/img/42/57033/w960_57033-620.png "INFINITI QX56 2011 Factory Workshop Manual
BRC-104
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
C1155 BRAKE FLUID LEVEL SWITCH
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace error-detected parts.
4.CHECK BRAKE FLUID LEVEL SWI")
BRC-104
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
C1155 BRAKE FLUID LEVEL SWITCH
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace error-detected parts.
4.CHECK BRAKE FLUID LEVEL SWITCH
Check brake fluids level witch. Refer to BRC-104, "
Component Inspection".
Is the inspection result normal?
YES >> GO TO 5.
NO >> Replace reservoir tank. Refer to BR-30, "
Disassembly and Assembly".
5.CHECK TERMINAL
Check brake fluid level switch pin terminals for damage or loose connection with harness connector.
Check ABS actuator and electric unit (control unit) pin terminals for damage or loose connection with har-
ness connector.
Is the inspection result normal?
YES >> Replace ABS actuator and electr ic unit (control unit). Refer to BRC-137, "Removal and Installa-
tion".
NO >> Repair or replace error-detected parts.
Component InspectionINFOID:0000000006222627
1.CHECK BRAKE FLUID LEVEL SWITCH
1. Turn the ignition switch OFF.
2. Disconnect brake fluid level switch harness connector.
3. Check resistance between terminals of brake fluid level switch.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace reservoir tank. Refer to BR-30, "
Disassembly and Assembly".
Brake fluid level switch
—Continuity
Connector Terminal
E47 2 Ground Existed
Brake fluid level switch Condition Resistance
Te r m i n a l
1 – 2 When brake fluid level in reservoir tank is within the specified level. 1.9 – 2.1 k
Ω
When brake fluid level in reservoir tank is less than the specified
level. 1.0
Ω or less
Revision: 2010 May2011 QX56
Page 628 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
C118E ACCUMULATORBRC-111
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C118E ACCUMULATOR
DTC LogicINFOID:0000000006222636
DTC DETECTION LOGIC
CAUTION:
The VDC warning lamp, A](/img/42/57033/w960_57033-627.png "INFINITI QX56 2011 Factory Workshop Manual
C118E ACCUMULATORBRC-111
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C118E ACCUMULATOR
DTC LogicINFOID:0000000006222636
DTC DETECTION LOGIC
CAUTION:
The VDC warning lamp, A")
C118E ACCUMULATORBRC-111
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C118E ACCUMULATOR
DTC LogicINFOID:0000000006222636
DTC DETECTION LOGIC
CAUTION:
The VDC warning lamp, ABS warning lamp and br ake warning lamp turns ON and DTC “C118E” may
be detected in self-diagnosis result of “ABS” when the brake pedal is excessively operated, such as
air bleeding. This is not a system malfunction because this occurs due to the temporary decrease in
accumulator fluid pressure. The system returns to normal condition when the accumulator fluid pres-
sure reaches the specified pressure with the ignition switch ON and the VDC warning lamp, ABS warn-
ing lamp, and brake warning lamp turn OFF. After these steps, ABS self-diagnosis results are erased.
Diagnosis ProcedureINFOID:0000000006222637
1.ERASE SELF-DIAGNOSIS RESULT
CAUTION:
The VDC warning lamp, ABS warning lamp and br ake warning lamp turns ON and DTC “C118E” may
be detected in self-diagnosis result of “ABS” when the brake pedal is excessively operated, such as
air bleeding. This is not a system malfunction because this occurs due to the temporary decrease in
accumulator fluid pressure. The system returns to normal condition when the accumulator fluid pres-
sure reaches the specified pressure with the ignition switch ON and the VDC warning lamp, ABS warn-
ing lamp, and brake warning lamp turn OFF. After these steps, ABS self-diagnosis results are erased.
With CONSULT-III.
1. Erase Self-diagnosis result for “ABS”.
2. Turn the ignition switch OFF.
3. Depress brake pedal to full stroke 20 times or more.
4. Start the engine, and then wait 2 minutes or more.
5. Check VDC warning lamp, ABS warning lamp and brake warning lamp turns OFF.
6. Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES >> Check the DTC. Refer to BRC-51, "DTC Index".
NO >> INSPECTION END
DTC Display Item Malfunction detected condition Possible causes
C118E ACCUMULATOR PRESS When performing excessive brake pedal operation
with the vehicle stopped. [When accumulator fluid
pressure reaches 11.43 MPa (114 bar, 116.6 kg/cm
2,
1657 psi) after reaching 17.3 MPa (173 bar, 176.5 kg/
cm
2, 2509 psi.] —
Revision: 2010 May2011 QX56
Page 640 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
BRAKE WARNING LAMPBRC-123
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
BRAKE WARNING LAMP
Component Function CheckINFOID:0000000006222651
1.CHECK BRAKE WARNING LAMP FUNCTION](/img/42/57033/w960_57033-639.png "INFINITI QX56 2011 Factory Workshop Manual
BRAKE WARNING LAMPBRC-123
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
BRAKE WARNING LAMP
Component Function CheckINFOID:0000000006222651
1.CHECK BRAKE WARNING LAMP FUNCTION")
BRAKE WARNING LAMPBRC-123
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
BRAKE WARNING LAMP
Component Function CheckINFOID:0000000006222651
1.CHECK BRAKE WARNING LAMP FUNCTION (1)
Check that brake warning lamp in combination meter turns ON for approx. 1 second after ignition switch is
turned ON.
CAUTION:
Never start engine.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Proceed to diagnosis procedure. Refer to BRC-123, "
Diagnosis Procedure".
2.CHECK BRAKE WARNING LAMP FUNCTION (2)
Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.
NOTE:
Brake warning lamp turns ON when parking brake is operated (when parking brake switch is ON).
Is the inspection result normal?
YES >> GO TO 3.
NO >> Check parking brake switch system. Refer to BRC-117, "
Diagnosis Procedure".
3.CHECK BRAKE WARNING LAMP FUNCTION (3)
Check that brake warning lamp in combination meter turns ON/OFF when brake fluid level switch is operated
while brake fluid level in reservoir tank is with the specified level.
NOTE:
Brake warning lamp turns ON when brake fluid is less than the specified level (when brake fluid level switch is
ON).
Is the inspection result normal?
YES >> INSPECTION END
NO >> Check brake fluid level switch system. Refer to BRC-103, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000006222652
1.CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIR-
CUIT
Perform the trouble diagnosis for ABS actuator and elec tric unit (control unit) power supply and ground circuit.
Refer to BRC-113, "
Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.PERFORM THE SELF-DIAGNOSIS
With CONSULT-III.
Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES >> Check the DTC. Refer to BRC-51, "DTC Index".
NO >> GO TO 3.
3.CHECK BRAKE WARNING LAMP SIGNAL
With CONSULT-III.
1. Select “ABS”, “DATA MONITOR” and “EBD WARN LAMP” according to this order.
2. Turn the ignition switch OFF.
3. Check that data monitor displays “On” for approx. 1 second after ignition switch is turned ON and then changes to “Off”.
CAUTION:
Never start engine.
Is the inspection result normal?
Revision: 2010 May2011 QX56
Page 644 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
EXCESSIVE OPERATION FREQUENCYBRC-127
< SYMPTOM DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
SYMPTOM DIAGNOSIS
EXCESSIVE OPERATION FREQUENCY
DescriptionINFOID:0000000006222657
VDC function](/img/42/57033/w960_57033-643.png "INFINITI QX56 2011 Factory Workshop Manual
EXCESSIVE OPERATION FREQUENCYBRC-127
< SYMPTOM DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
SYMPTOM DIAGNOSIS
EXCESSIVE OPERATION FREQUENCY
DescriptionINFOID:0000000006222657
VDC function")
EXCESSIVE OPERATION FREQUENCYBRC-127
< SYMPTOM DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
SYMPTOM DIAGNOSIS
EXCESSIVE OPERATION FREQUENCY
DescriptionINFOID:0000000006222657
VDC function, TCS function, ABS functi on, EBD function, hill start assist function and brake limited slip differ-
ential (BLSD) function operates in excessive operation frequency.
Diagnosis ProcedureINFOID:0000000006222658
1.CHECK BRAKING FORCE
Check brake force using a brake tester.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Check brake system.
2.CHECK FRONT AND REAR AXLE
Check that there is no excessive looseness in front and rear axle.
Front axle: Refer to FA X - 7 , "
Inspection" (2WD), FAX-16, "Inspection" (4WD).
Rear axle: Refer to RAX-5, "
Inspection"
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace error-detected parts.
3.CHECK WHEEL SENSOR
Check wheel sensor.
Check installation and damage of wheel sensor.
Check connection of wheel sensor harness connector.
Check terminal of wheel sensor harness connector.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace wheel sensor. Front wheel sensor: Refer to BRC-134, "
FRONT WHEEL SENSOR : Removal and Installation".
Rear wheel sensor: Refer to BRC-135, "
REAR WHEEL SENSOR : Removal and Installation".
4.CHECK WARNING LAMP TURNS OFF
Check that ABS warning lamp, brake warning lamp and VDC warning lamp turn OFF approx. 1 second after
key switch is turned ON and stay in OFF status during driving.
CAUTION:
Brake warning lamp turns ON when parking brake is operated (parking brake switch is ON) or brake
fluid is less than the specified level (brake fluid level switch is ON).
Is the inspection result normal?
YES >> Normal
NO >> Perform self-diagnosis for “ABS” with CONSULT-III.
Revision: 2010 May2011 QX56
Page 645 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
BRC-128
< SYMPTOM DIAGNOSIS >[WITH VDC]
UNEXPECTED BRAKE PEDAL REACTION
UNEXPECTED BRAKE PEDAL REACTION
DescriptionINFOID:0000000006222659
A malfunction of brake pedal feel (height or ot
hers) is det](/img/42/57033/w960_57033-644.png "INFINITI QX56 2011 Factory Workshop Manual
BRC-128
< SYMPTOM DIAGNOSIS >[WITH VDC]
UNEXPECTED BRAKE PEDAL REACTION
UNEXPECTED BRAKE PEDAL REACTION
DescriptionINFOID:0000000006222659
A malfunction of brake pedal feel (height or ot
hers) is det")
BRC-128
< SYMPTOM DIAGNOSIS >[WITH VDC]
UNEXPECTED BRAKE PEDAL REACTION
UNEXPECTED BRAKE PEDAL REACTION
DescriptionINFOID:0000000006222659
A malfunction of brake pedal feel (height or ot
hers) is detected when brake pedal is depressed.
Diagnosis ProcedureINFOID:0000000006222660
1.CHECK FRONT AND REAR AXLE
Check that there is no excessive looseness in front and rear axle.
Front axle: Refer to FAX-7, "
Inspection" (2WD), FAX-16, "Inspection" (4WD).
Rear axle: Refer to RAX-5, "
Inspection"
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.CHECK DISC ROTOR
Check disc rotor runout.
Front: Refer to BR-16, "
DISC ROTOR : Inspection and Adjustment".
Rear: Refer to BR-18, "
DISC ROTOR : Inspection and Adjustment".
Is the inspection result normal?
YES >> GO TO 3.
NO >> Refinish or replace disc rotor. Front: Refer to BR-16, "
DISC ROTOR : Inspection and Adjustment".
Rear: Refer to BR-18, "
DISC ROTOR : Inspection and Adjustment".
3.CHECK BRAKE FLUID LEACKAGE
Check fluid leakage.
Front: Refer to BR-24, "
FRONT : Inspection".
Rear: Refer to BR-26, "
REAR : Inspection".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace error-detected parts.
4.CHECK BRAKE PEDAL
Check each item of brake pedal. Refer to BR-7, "
Inspection and Adjustment".
Is the inspection result normal?
YES >> GO TO 5.
NO >> Adjust each item of brake pedal. Refer to BR-7, "
Inspection and Adjustment".
5.CHECK BRAKING FORCE
Check brake force using a brake tester.
Is the inspection result normal?
YES >> GO TO 6.
NO >> Check each components of brake system.
6.CHECK BRAKE PERFORMANCE
Disconnect ABS actuator and electric unit (control unit) connector so that ABS does not operate. Check that
brake force is normal in this condition. Connect harness connectors after checking.
Is the inspection result normal?
YES >> Normal
NO >> Check each components of brake system.
Revision: 2010 May2011 QX56
Page 647 of 5598
![INFINITI QX56 2011 Factory Workshop Manual
BRC-130
< SYMPTOM DIAGNOSIS >[WITH VDC]
DOES NOT OPERATE
DOES NOT OPERATE
DescriptionINFOID:0000000006222663
VDC function, TCS function, ABS functi
on, EBD function, hill start assist function and br](/img/42/57033/w960_57033-646.png "INFINITI QX56 2011 Factory Workshop Manual
BRC-130
< SYMPTOM DIAGNOSIS >[WITH VDC]
DOES NOT OPERATE
DOES NOT OPERATE
DescriptionINFOID:0000000006222663
VDC function, TCS function, ABS functi
on, EBD function, hill start assist function and br")
BRC-130
< SYMPTOM DIAGNOSIS >[WITH VDC]
DOES NOT OPERATE
DOES NOT OPERATE
DescriptionINFOID:0000000006222663
VDC function, TCS function, ABS functi
on, EBD function, hill start assist function and brake limited slip differ-
ential (BLSD) function does not operate.
Diagnosis ProcedureINFOID:0000000006222664
CAUTION:
VDC function, ABS function and EBD function never operate when the vehicle speed is 10 km/h (6.2
MPH) or less.
TCS function, hill start assist fu nction and brake limited slip diffe rential (BLSD) function operates
when the vehicle speed is 0 km/h (0 MPH) (the vehicle is in stop status).
VDC function and TCS function never operate wh en VDC OFF switch is operated (when VDC OFF
indicator lamp turns ON).
1.CHECK ABS WARNING LAMP
Check that ABS warning lamp, brake warning lamp and VDC warning lamp turn ON and turn OFF approx. 1
second after key switch is turned ON. Check that ABS warning lamp, brake warning lamp and VDC warning
lamp and stay in OFF status during driving.
CAUTION:
Brake warning lamp turns ON when parking brake is operated (parking brake switch is ON) or brake
fluid is less than the specified level (brake fluid level switch is ON).
Is the inspection result normal?
YES >> Normal
NO >> Perform self-diagnosis for “ABS” with CONSULT-III.
Revision: 2010 May2011 QX56