ISUZU TFS SERIES 1997 Workshop Manual

10-34 CAB
REMOVAL AND INSTALLATION
Removal Steps
1. Door finisher
2. Rear view mirror, sunvisor and dome
lamp assembly
3. Windshield and back light glass
4. Head lining
5. Insulation pad
Installation Steps
5. Insulation pad
4. Head lining
3. Windshield and back light glass
2. Rear view mirror, sunvisor and dome
lamp assembly
1. Door finisher
Important Operations - Installation
4. Head Lining
1) Install the head lining
1 to the body panel.
2 : Windshield glass
2) Roll up the head lining in the body side of the back light
glass and door opening.

CAB 10-35
3) Roll up the head lining provided with slits, in the corner.
4) Roll up the head lining 1 in the body side of door opening.
5) Fix to the door side, using the finisher
2.

10-36 CAB
QUARTER GLASS (SPACE CAB)
REMOVAL AND INSTALLATION
Removal Steps
1. Screw bolt
2. Quarter glass
3. Screw bolt
4. Screw bolt
5. Fastener assembly
Installation Steps
5. Fastener assembly
4. Screw bolt
3. Screw bolt
2. Quarter glass
1. Screw bolt
Important Operations - Removal
2. Quarter Glass
Pull out the glass assembly towards the rear of the vehicle.

CAB 10-37
FRONT SEAT
SPECIAL PARTS FIXING BOLT
Nm (kgfm/lbft)
39.29.8 (41/28.97.2) 39.2
9.8 (41/28.97.2) 39.2
9.8 (41/28.97.2)

10-38 CAB
REMOVAL AND INSTALLATION


BUCKET SEAT BENCH SEAT
Removal Steps
1. Adjust cover
2. Bolt
3. Seat assembly
4. Adjuster
Installation Steps
4. Adjuster
3. Seat assembly
2. Bolt
1. Adjust cover
Important Operation - Installation
2. Bolt
Torque N
m(kgfm/lbft)
39.2
9.8 (4 1 / 28.9 7.2)

CAB 10-39
FRONT AND REAR SEAT BELT
REMOVAL AND INSTALLATION
1
Removal Steps
1. Trim
2. Seat belt and retractor
Installation Steps
2. Seat belt and retractor
1. Trim
Important Operation - Installation
2. Seat Belt and Retractor
Bolt Torque N
m(kgfm/lbft)
39.2
9.8 (4 1 / 28.9 7.2)

10-40 CAB
JUMP SEAT
REMOVAL AND INSTALLATION
Removal Steps
1. Head rest and back trim cover
2. Hinge cover, center
3. Bolt
4. Jump seat assembly
Installation Steps
4. Jump seat assembly
3. Bolt
2. Hinge cover ; center
1. Head rest and back trim cover
Important Operation - Installation
3. Bolt
Torque N
m(kgfm/lbft)
19.6
5 (2 0.5 / 14.5 3.6)

CAB 10-41
JUMP SEAT BELT
REMOVAL AND INSTALLATION
Removal Steps
1. Hinge cover
2. Hinge cover ; center
3. Bolt
Installation Steps
3. Bolt
2. Hinge cover ; center
1. Hinge cover
Important Operation - Installation
3. Bolt
Torque N
m(kgfm/lbft)
39.2
9.8 (4 1 / 28.9 7.2)

WORKSHOP MANUAL
TF SERIES
CLUTCH
SECTION 7C

NOTICE
Before using this Workshop Manual to assist you in performing vehicle
service and maintenance operations, it is recommended that you
carefully read and thoroughly understand the information contained in
Section - OA under the headings “GENERAL REPAIR
INSTRUCTIONS” and “HOW TO USE THIS MANUAL”.
All material contained in this Manual is based on the latest product
information available at the time of publication.
All rights are reserved to make changes at any time without prior
notice.