torque JAGUAR XFR 2010 1.G Workshop Manual

18.























19. WARNING: Make sure that a new bolt is installed.

Apply loctite 270 to the thread of the bolts.

Torque: 65 Nm

4. NOTE: Tighten the bolts in the indicated sequence.
Special Tool(s): JLR-303-1622 Torque: 11 Nm

Torque: 11 Nm


















6. Refer to: Flexplate (303-01D Engine - V8 S/C 5.0L Petrol, Removal and Installation).

3. CAUTION: Make sure that new cylinder head bolts are
installed.


NOTE: Tighten the bolts in the indicated sequence.
Torque: 20 Nm


























4. NOTE: Tighten the bolts in the indicated sequence.
Torque: 35 Nm

7.
















8.
9.
10. Torque: 25 Nm

















NOTE: Tighten the bolts in the indicated sequence.

Torque: 12 Nm













CAUTIONS:


If a new cylinder head has been installed then new
tappets must be installed.


If the cylinder head is being removed without a new
component being installed, the tappets must be installed in
their original positions.
Lubricate the valve tappets with clean engine oil.







Torque: 10 Nm

11.















12.
13.
CAUTION: Install the new seals.

Torque: 10 Nm

14.
15.
16.


























CAUTION: Install a new seal.


NOTE: Engine shown removed for clarity.
Torque: 12 Nm

Torque: 20 Nm

Torque: 12 Nm



















22.
Refer to: Exhaust Manifold LH (303-01C Engine - V8 5.0L Petrol, Removal and Installation).

23. Refer to: Camshaft LH (303-01D Engine - V8 S/C 5.0L Petrol, Removal and Installation).

24. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). www.JagDocs.com

3. CAUTION: Make sure that new cylinder head bolts are
installed.
Torque: 20 Nm






























4. Torque: 35 Nm