torque JAGUAR XFR 2010 1.G Workshop Manual

M6 (2) 11 Nm M8 (3) 25 Nm M5 nut (4) 6 Nm































Torque:
Unions 21 Nm www.JagDocs.com

31.
32.
33. NOTES:


Install the bolt and unions finger tight before final tightening.


Remove and discard the blanking caps.

Torque:
Unions 21 Nm M6 11 Nm















Torque:
Unions 21 Nm















Torque:
M10 29 Nm M6 11 Nm

36.












































Torque:
Unions 21 Nm M6 11 Nm

37.
38.
39.
40.


















Torque:
Unions 21 Nm

















NOTE: The high-pressure fuel pumps are removed from the illustration
for clarity.

Torque: 25 Nm
















Torque: 25 Nm
















Torque: 55 Nm

45.
46.
47.
48. Torque: 12 Nm


















CAUTION: Install all the bolts finger tight before final tightening.

Torque: 25 Nm

































CAUTION: Install all the bolts finger tight before final tightening.


NOTE: Tighten the bolts in the indicated sequence.

Torque: 48 Nm www.JagDocs.com

49. CAUTIONS:


Install all the bolts finger tight before final tightening.


The bolts can only be used 3 times, mark the bolts with a center punch.
If 2 punch marks are visible, discard the bolts.


Install the bolts in the noted position.

NOTES:


Make sure that the crankshaft is not rotated.


Make sure the crankshaft and flexplate mating faces are clean before
installation.


Tighten the retaining bolts working diagonally.

Torque:
Stage 1:45 Nm Stage 2:90°
50. Refer to: Engine (303-01D Engine - V8 S/C 5.0L Petrol, Installation).
51. Refer to: Crankshaft Pulley (303-01D Engine - V8 S/C 5.0L Petrol, Removal and Installation).

52. Lower the vehicle.

53. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

2. NOTE: Lubricate and install the new O-ring seals.

Torque:
M8 25 Nm M6 12 Nm



















3. NOTE: Lubricate and install the new O-ring seals.
4. Torque: 12 Nm www.JagDocs.com

7. CAUTION: Make sure that the tensioner spring is
correctly located.


NOTE: Tsubaki timing drive only.
Torque: 21 Nm









8. NOTE: INA timing drive only.
Install the lower timing chain making sure the coloured
chain links align correctly with the fuel rail high-pressure
fuel pumps camshaft and crankshaft sprocket markings.

9. CAUTION: Make sure that the tensioner spring is
correctly located.


NOTE: INA timing drive only.
Torque: 21 Nm













10. Refer to: Oil Pan Extension (303-01C Engine - V8 5.0L Petrol, Removal and Installation).

11. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).