display Lancia Delta 2014 Owner handbook (in English)

22KNOWING YOUR CAR
Water in diesel filter (amber)When the key is turned to MAR, the warning
light switches on but it s hould switch off after
a few s econds. The warning light turn s on when
there is water in the dies el filter. The display will s how the
dedicated message.
c
The presence of water in the supply circuit may
cause severe damage to the injection system and
irregular engine operation. If
cwarning light
lights up (on some versions with the message on the dis-
play), go to a Lancia Dealership as soon as possible
to have the system bled. Water may have entered the
tank if this appears immediately after refuelling: if this
happens, switch the engine off immediately and con-
tact a Lancia Dealership.
ABS failure (amber)
When the key is turned to MAR, the warning
light switches on but it s hould switch off after
a few s econds. The warning light will light up
when the system i s either not working or not available.
In this case the braking system will work as normal, but
without the extra performance offered b y the ABS .
Drive carefully and go to a Lancia Dealer ship as s oon as
possible.
The dis play will s how the dedicated me ssage.
>
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 22

KNOWING YOUR CAR23
1
Lancia Code sy stem failure (amber)
This warning light (or symbol on the display ),
when on cons tantly with the ignition key turned
to MAR, indicates a possible failure ( see “Lancia
Code system”).
If the
Ywarning light (or symbol in the display) is flas h-
ing with engine running, this means that the car is not pro-
tected by the engine immobilis er device (see “Lancia
Code system”).
Contact a Lancia Dealer ship to have all the keys pro-
grammed.
Alarm failure
(for vers ions/markets , where provided)
A failure in the alarm system is s ignalled by this warning
light (or symbol in the display) switching on. Contact a
Lancia Dealer ship as soon as possible.
The dis play shows the dedicated message.
Break in attempt
(for vers ions/markets , where provided)
This warning light (or symbol on the dis play) switches on
when a br

eak-in attempt is detected. Contact a Lancia
Dealers hip as soon as possible.
The dis play will s how the dedicated me ssage.
Y
Insufficient tyre pressure
(for vers ions/markets ,where provided)
When the key i s turned to MAR, the warning
light switches on, but it s hould switch off after a
few seconds . The warning light (amber), or symbol in the
dis play (red), switch on when the inflation pre ssure of one
or more ty res falls below a pres et level. In this way the TPMS
warns the driver and s ignals the possibility of the tyre be-
ing dangerous ly deflated and a probable puncture (s ee para-
graph “TPMS ” in this chapter).
IMPORTANT Do not continue driving with one or more
flat tyre s as handling may be compromised. Stop the car,
avoiding har sh braking or steering manoeuvres. Replace
the wheel immediately with the space-saver wheel (for
vers ions /markets wher

e provided) or carr y out a repair
u sing the dedicated kit ( see “Changing a wheel” in the
chapter “4”) and contact a Lancia Dealer ship as s oon
as possible.
C heck ty re pressures
When the key is turned to MAR, the warning light (for ver-
s ions /markets , where provided) s witches on, but it s hould
s witch off after a few s econds.
The warning light (or symbol in the dis play) switches on
to show the flat ty re (see “TPMS ” paragraph in thi s
chapter).
n
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 23

24KNOWING YOUR CAR
Should two or more ty res be flat, the dis play will s how the
indications corresponding to each ty re in sequence. Re-
s tore the correct inflation pre ssure values as s oon as pos-
s ible (s ee paragraph “Cold inflation pre ssures” in chap-
ter “6”).
T yre pressure unsuitable for speed
When the key is turned to MAR, the warning light (for
vers ions /markets , where provided) s witches on, but it
s hould switch off after a few s econds.
S hould it be necessary to travel at a speed higher than 160
km/h, inflate the t yre s more than the pressure value s pec-
ified in paragraph “Inflation pressures” in chapter “6”.
If the TPMS (for versions/markets where provided) de-
tects that the pr

essure of one or more t yre s i s uns uitable
for the current s peed, the warning light or symbol will
s witch on (together with the message on the di splay ) (see
“T yre pre ssure low” paragraph in this chapter) and it will
s tay on until the car s lows down to a s peed below the pre-
s et thres hold (see “TPMS ” paragraph in thi s chapter).
IMPORTANT In this case, slow down immediately because
t y re overheating could damage t yre performance and
durability beyond repair, and may even make the tyre ex-
plode.
Particularly strong radio-frequency inter-
ference may cause the TPMS to function in-
correctly. The driver is notified of this con-
dition through a message (for versions/markets,
where provided).
The message will disappear automatically as soon
as the interference ceases to disturb the system.
Exterior lig hts failure (amber)
This warning light (or symbol on the display)
s witches on when a fault i s detected in any of
the following lights :
❍ side lights ;
❍ brake lights (for versions/markets where provided);
❍ rear fog light s;
❍ direction indicators ;
❍ number plate light s;
❍ day time running light s.
The failure relating to the se lights could be: one or more
blown bulbs , a blown protection fus e or a break in the elec-
trical connection.
The dis play shows the dedicated message.
W
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 24

26KNOWING YOUR CAR
DISPLAY
The car may be provided with a multifunction/reconfig-
urable multifunction di splay that s hows useful informa-
tion, according to the previou s s ettings , when driving. MULTIFUNC
TION DISPLAY “STANDARD”
SCREEN fig . 6
The standard screen shows the following information:
A. Date
B. Po ssible Dualdrive electric power steering engagement
C. Sport driving mode indication
(for vers ions/markets where provided)
D. Time
E. Milometer (display of distance travelled in kilome- tres /miles )
F. P o ssible ice on the road indication
G . Outs ide temperature
H. Scheduled servicing interval
I. Headlight alignment po sition (only with dipped beam
headlights on).
fig. 6L0E1000g
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 26

30KNOWING YOUR CAR
Selection of an option from main menu
without submenu:
– press the S ET button briefly to select the main menu s et-
ting you wis h to change;
– press
Õor Ô(with single presse s) to s elect the new s et-
ting;
– press the SET button briefl y to s tore the new s etting and
go back to the main menu option selected previous ly .
S electing an option from the main menu with a
submenu:
– briefly press the SET button to di splay the firs t submenu
option;
– press
Õor Ô(with single presse s) to s croll through all
the submenu option s;
– briefly press the S ET button to s elect the display ed sub-
menu option and to open the relevant settings menu;
– press
Õor Ôto select the new s etting for this s ubmenu
option;
– press the SET button briefl y to s tore the new s etting and
go back to the previou s s ubmenu option.
MENU ITEMS
Lig hting (Passeng er compartment lig ht adjustment)
This function is used to s et the brightne ss of the instru-
ment panel, s ound system control s and automatic climate
control system controls (for versions/markets where pro-
vided) to 8 level s.
Proceed as follows to adjus t the brightness:
– press the S ET button briefly to make the display flash
the previous ly s et level;
– press button
Õor Ôto adjus t the brightness level;
– briefly press the S ET button to go back to the menu
s creen or hold the button down to go back to the standard
s creen without s aving.
S peed warning (Speed limit)
This function allows the car speed limit to be s et (km/h
or mph) and the driver will be notified when it i s exceed-
ed (s ee “Warning lights on panel” section in chapter 1).
To set the des ired speed limit, proceed a s follows :
– press the S ET button briefly , the display will s how the
dedicated message;
– press the
Õor Ôbutton to s elect speed limit activation
(On) or deactivation (Off);
– when the function is activated (On), press the
Õor Ô
button to select the des ired speed limit and press SET to
confirm the choice.
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 30

KNOWING YOUR CAR31
1
IMPORTANT Setting is possible between 30 and 200
km/h, or 20 and 125 mph, according to the previou sly s et
unit. See the “Meas urement unit adjus tment (Measure-
ment unit)” paragraph de scribed below. The s etting will
increas e/decreas e by five units each time
Õ/Ôis pressed.
Hold down button
Õ/Ôto increas e/decrease the setting
rapidly . Complete the adjus tment with single presses of
the button when y ou approach the de sired value.
– briefly press the S ET button to go back to the menu
s creen or hold the button down to go back to the standard
s creen without s aving.
To cancel the s etting, proceed as follows:
– press the S ET button briefly to make the display flash
(On);
– press the
Ôbutton to make the di splay flash (Off);
– press the SET button briefl y to return to the menu s creen
or press the button for longer to return to the standard
s creen without memori sing. Headlig
ht sensor (automatic/dusk sensor
headlig hts sensitivity adjustment)
(for vers ions/markets , where provided)
This function is used to adjus t the dusk sens or sens itivi-
t y to three levels (level 1 = minimum, level 2 = medium,
level 3 = maximum); the higher the sens itivity , the lower
the amount of external light needed to switch the head-
lights on.
Proceed as follows to set:
– pre ss the S ET button briefly to make the display flash
the previous ly s et level;
– p

re ss
Õor Ôto make y our choice;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out saving.
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 31

32KNOWING YOUR CAR
Cornering lights (activation/deactivation of
cornering lights - fog lights with cornerin g
function) (for versions/markets where provided)
This function activate s/deactivates the cornering lights.
To activate/deactivate (ON/OFF) the light s, proceed as
follows :
– press the S ET button briefly , the display will s how “On”
or “Off” fla shing depending on the previou s s etting;
– press
Õor Ôto make y our choice;
– briefly press the S ET button to go back to the menu
s creen or hold the button down to go back to the standard
s creen without s aving.
Trip B data/activation (Trip B enablement)
This function can be us ed to activate (On) or deactivate
(Off) the Trip B dis play (partial trip).
For further information see “Trip computer”.
Proceed as follows to switch the function on/off:
– press the S ET button briefly to make the display flash
On or Off depending on the previou s s etting;
– pre ss
Õor Ôto make y our choice;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out saving. Time adjustment (
Clock adjustment)
This function enables the clock to be set through two sub-
menus : “Time” and “Format”.
To carry out the adjus tment, proceed as follows:
– briefly press the S ET button and two s ubmenus “Time”
and “Format” are dis played;
– press the
Õor Ôbutton to move between the two sub-
menus ;
– once y ou have s elected a s ub-menu, pre ss SET briefly ;
– when y ou select “Time”, briefly pressing SET makes the
hours flash on the di splay ;
– press
Õor Ôto adjus t the value;
– briefly press the S ET button and the minute s will flas h
on the dis play;
– press
Õor Ôto adjus t the value.
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 32

34KNOWING YOUR CAR
Initial page
(display of information on the main screen)
(for vers ions/markets , where provided)
This function allow s y ou to choos e the information you
would like to s ee on the main s creen. You can choo se to
dis play the date or the turbocharger supercharging pre s-
s ure.
To make y our choice, proceed a s follows :
– briefly press SET: “Initial page” will appear on the di s-
play ;
– press the S ET button again briefly to display the “date”
and “engine info” option s;
– press
Õor Ôto select the information you wis h to see
on the main page of the di splay ;
– briefly press the S ET button to go back to the menu
s creen or hold the button down to go back to the standard
s creen without s aving.
When the key is turned to MAR and the initial check stage
i s over, the dis play will s how the information selected via
the “Firs t page” menu function. S
ee radio (audio information displa y)
With this function the dis play s hows information about
the sound system.
– Radio: s elected station frequency or RDS message, au-
tomatic tuning activation or Auto STo r e ;
– Audio CD, MP3 CD: track number;
– CD Changer: CD number and track number;
To show the radio information on the dis play (On) or clear
it (Off), proceed as follows:
– briefly press the S ET button: the dis play flashes On or
Off depending on the pr
evious s etting;
– pre ss
Õor Ôto make y our choice;
– briefly press the S ET button to go back to the menu
s creen or hold the button down to go back to the standard
s creen without s aving.
Autoclose (Automatic central lockin g with
car running )
When activated (On), thi s function locks the doors auto-
matically when the vehicle s peed exceeds 20 km/h.
Proceed as follows to activate or deactivate thi s function:
– press the S ET button briefly to display a submenu;
– press the S ET button briefly to make the display flash
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 34

KNOWING YOUR CAR35
1
On or Off depending on the previous s etting;
– pre ss
Õor Ôto make y our choice;
– press the S ET button briefly to return to the s ubmenu
s creen or hold the button down to return to the main menu
s creen without s aving;
– hold down the SET button again to return to the stan-
dard screen or to the main menu according to where you
are in the menu.
Unit of measurement
( S etting the unit of measurement)
With this function is possible to s et the unit of meas ure-
ment in three s ubmenus: “Distance”, “Cons umption” and
“Temperature”. To s et the required unit proceed a s fol-
lows :
– briefly press SET to dis play the three s ub-menus;
– press the
Õor Ôbutton to move between the three s ub-
menus ;
– once the s ubmenu to be modified has been selected,
briefly press the S ET button;
– if the s ubmenu “Di stance” is entered: by briefly press-
ing SET the display shows “km” or “mi” depending on
the previous setting;
– press
Õor Ôto make y our choice;
– when y ou select “Cons umption”, pressing SET button
makes km/l, l/100km or mpg appear on the di splay de-
pending on the previou s s etting; If the s
et distance unit is “km”, the fuel con sumption unit
will be dis played in km/l or l/100 km.
If the s et distance unit is “mi” the fuel cons umption unit will
be dis played in “mpg”.
– pre ss
Õor Ôto make y our choice;
– when y ou select “Temperature”, pressing SET makes °C
or °F appear on the dis play depending on the previous s et-
ting;
– pre ss
Õor Ôto make y our choice;
When you have made the required settings , briefly press
the SET button to go back to the submenu screen or hold
the button down to go back to the main menu s creen with-
out storing the new s ettings.
– press the SET button again for a long time to return to
the standard screen or to the main menu according to
where you are in the menu.
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 35

36KNOWING YOUR CAR
Language (Lang uage selection)
Dis play messages can be shown in different languages : Ital-
ian, German, Englis h, Spanis h, French, Portugues e and
Dutch.
To set the des ired language, proceed a s follows :
– briefly press the button S ET: the previously s et language
s tarts flashing on the di splay ;
– pre ss
Õor Ôto make y our choice;
– briefly press the S ET button to go back to the menu
s creen or hold the button down to go back to the standard
s creen without s aving.
Warning s volume (Adjustin g the failure/warnin g
acoustic sig nal volume)
With this function the volume of the acous tic signal which
accompanies the display of failure/warning can be ad-
jus ted according to 8 level s.
To set the des ired volume, proceed a s follows :
– press the S ET button briefly , making the display flash
the previous ly s et volume level;
– press
Õor Ôto adjus t the value;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out saving. Button volume (Adjustin
g the button volume)
This function enables y ou to adjus t the volume of the
acous tic signal (8 s ettings) accompany ing the activation
of buttons SET,
Õand Ô.
To set the des ired volume, proceed a s follows :
– press the S ET button briefly , making the display flash
the previous ly s et volume level;
– press
Õor Ôto adjus t the value;
– briefly press the S ET button to go back to the menu
s creen or hold the button down to go back to the standard
s creen without s aving.
Belt reminder
(Buzzer/reactivation for SBR indication)
This function is only display ed after a Lancia Dealer ship
has deactivated the S BR (see SBR paragraph, chapter
“2”).
S ervice (S cheduled servicin g)
U sing this function y ou can display information about the
mileage interval s for car s ervicing.
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 36