technical specifications Lancia Delta 2014 Owner handbook (in English)

264
TECHNICAL SPECIFICATIONS
WHEELSRIMS AND TYRES
Pressed steel or alloy rims. Tubeless radial carcass tyres.
All approved tyres are listed in the Vehicle Registration
Document.
IMPORTANT In the event of discrepancies between the
information provided in this “Owner’s handbook” and the
“Registration Document”, consider the specifications
shown in the log book only. For safe driving, the car must
be fitted with tyres of the same make and type on all
wheels.
IMPORTANT Do not use air chambers with Tubeless tyres.
SPACE-SAVER WHEEL
Pressed steel rim. Tubeless tyre.
WHEEL GEOMETRY
Total front toe in: –1
±1 mm
Total rear toe in: 2
± 2 mm
The figures refer to the car in running order.UNDERSTANDING TYRE MARKING fig. 5
Example: 195/55 R 16 91 V
195 = Nominal width (S, distance in mm between
sidewalls).
55 = Height/width ratio (H/S) as a percentage.
R = Radial tyre.
16 = Rim diameter in inches (Ø).
91 = Load index (capacity).
V = Maximum speed index.
fig. 5
L0E0120m
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 264

TECHNICAL SPECIFICATIONS
265
6
Load index (capacity)
60 = 250 kg 84 = 500 kg
61 = 257 kg 85 = 515 kg
62 = 265 kg 86 = 530 kg
63 = 272 kg 87 = 545 kg
64 = 280 kg 88 = 560 kg
65 = 290 kg 89 = 580 kg
66 = 300 kg 90 = 600 kg
67 = 307 kg 91 = 615 kg
68 = 315 kg 92 = 630 kg
69 = 325 kg 93 = 650 kg
70 = 335 kg 94 = 670 kg
71 = 345 kg 95 = 690 kg
72 = 355 kg 96 = 710 kg
73 = 365 kg 97 = 730 kg
74 = 375 kg 98 = 750 kg
75 = 387 kg 99 = 775 kg
76 = 400 kg 100 = 800 kg
77 = 412 kg 101 = 825 kg
78 = 425 kg 102 = 850 kg
79 = 437 kg 103 = 875 kg
80 = 450 kg 104 = 900 kg
81 = 462 kg 105 = 925 kg
82 = 475 kg 106 = 950 kg
83 = 487 kgMaximum speed index
Q = up to 160 km/h.H = up to 210 km/h.
R = up to 170 km/h.V = up to 240 km/h.
S = up to 180 km/h.W= up to 270 km/h.
T = up to 190 km/h.Y = up to 300 km/h.
U = up to 200 km/h.
Maximum speed index
for snow tyres
QM + S = up to 160 km/h.
TM + S = up to 190 km/h.
HM + S = up to 210 km/h.
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 265

266
TECHNICAL SPECIFICATIONS
UNDERSTANDING RIM MARKING fig. 5
Example: 7J x 16 H2 ET 31
7 = rim width in inches (1).
J=rim drop centre outline (side projection where the
tyre bead rests) (2).
16 = rim nominal diameter in inches (corresponds to the
diameter of the tyre to be mounted) (3 = Ø).
H2 = shape and number of humps (circumference pro-
jection which holds tubeless tyre beads on the rim).
ET 31 = wheel camber angle (distance between the
disc/rim supporting plane and the wheel rim cen-
tre line).
fig. 6
L0E0193m
RIM PROTECTOR TYRES fig. 6
Do NOT fit wheel caps when using integral
wheel caps fixed (with springs) to the steel
rim and after-sale tyres provided with Rim
Protector (fig. 5a). The use of unsuitable tyres and
wheel caps may cause sudden loss of tyre pressure.
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 266

TECHNICAL SPECIFICATIONS
267
6
7Jx16”- ET31
7Jx16”- ET31
7Jx17”- ET31
7,5Jx18”- ET35 (**)
4Bx15” H-ET 35 (*) 125/90 R15-96M (*)
(■) 1.6 Multijet 120 HP versions
(*) Depending on the trim level, the space-saver wheel for the 1.6 Multijet 120 HP version has a 205/55 R16-91V tyre and a
7Jx16” - ET31 rim. In this case the 205/55 R16 91V tyre has the same specifications as the space-saver wheel: the informa-
tion in “Replacing a wheel” paragraph therefore refers to the 205/55 R16 91V tyre.
(**) For versions/markets, where provided
(❏) Tyre not suitable for fitting snow chains.
Rims Tyres Tyres Space-saver wheel
for snow(for versions/markets, where provided)
Rim Tyre
On 205/55 R16-91V tyres, use reduced size snow chains with a maximum projection of 9 mm beyond
the tyre profile. On 225/45 R17-91W tyres, use reduced size snow chains with a maximum projection
of 7 mm beyond the tyre profile.
IMPORTANT Special techniques need to be adopted for 225/40 R18 92W tyres. For this reason, these tyres can only
be requested when the vehicle is purchased. Do not fit this tyre after vehicle has been purchased !
195/155R16-91V (■)
205/55 R16-91V
225/45 R17-91W
225/40 R18-92W
(❏) (**)
REINFORCED
195/55R16-91T (■) (M+S)
205/55 R16-91T (M+S)
225/45 R17-91T (M+S)
225/40 R18-92T (M+S)
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 267

2.72.5
2.72.5
2.72.5
2.92.7
195/55 R16-91V
205/55 R16-91V
225/45 R17-91W
225/40 R18-92W268
TECHNICAL SPECIFICATIONS
205/55 R16-91V
125/90 R15-96
2.42.2
2.42.2
2.42.2
2.62.4
Add +0.3 bar to the prescribed pressure when the tyres are warm. Check correct pressure when the tyres are cold.
With snow tyres, add +0.2 bar to the prescribed pressure for standard tyres.
When travelling at speeds over 160 km/h, inflate the tyres to the values specified for fully laden conditions.
The TPMS is not fitted with 195/55 R16 91V tyres.COLD TYRE INFLATION PRESSURES (bar)
2.2
4.2
Size Inflation pressure
SPACE-SAVER/SPARE WHEEL
TYRES PROVIDED
Size Medium load Full load
Front Rear Front Rear
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 268

TECHNICAL SPECIFICATIONS
269
6
fig. 7
L0E0299m
DIMENSIONS
4520
1017
2700
(*) Small variations in size are possible depending on the dimensions of the rims
1499 (*)
1538
1531
Luggage compartment capacity
Capacity with vehicle unladen (VDA standards)...............................380 dm
3
Maximum capacity............................................................................465 dm
3
Dimensions are expressed in mm and refer to the car equipped with its stan-
dard-supplied tyres. Height is measured with the car unladen.
1797
ABCDEFGH
803
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 269

270
TECHNICAL SPECIFICATIONS
PERFORMANCEMax. allowed speeds during the initial period of usage of the car.
1.6 Multijet 105 HP: 186 km/h.
1.6 Multijet 120 HP:194 km/h.
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 270

TECHNICAL SPECIFICATIONS
271
6
1410
570
1090
950
1980
1300
500
80
60
WEIGHTSWeights (kg) 1.6 Multijet 105/120 HP
Unladen weight (with all fluids, fuel tank filled to 90% and without optional equipment)Payload (*) including the driver:
Maximum permitted loads (**)
–– front axle:
–– rear axle:–– total:
Towable loads
– braked trailer:– non-braked trailer:Maximum load on roof:
Maximum load on the ball joint
(braked trailer):(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen weight increases and consequently the payload will de-
crease, still complying with the maximum allowed loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform with-
in the maximum permitted loads.
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 271

58 –
8/10 –
7.1–
4.33.6
4.94.1
1.87 1.7
–0.8
6–
CAPACITIES272
TECHNICAL SPECIFICATIONS
(▲) When the vehicle is used in particularly harsh climate conditions, we recommend using a mixture of 60% PARAFLU
UPand
40% distilled water.
Diesel fuel for motor vehicles
(EN590 specification)
Mixture of demineralised water
and PARAFLU
UP
in 50-50 proportion (▲)
SELENIA WR FORWARD
TUTELA TRANSMISSION GEARFORCE
TUTELA TOP 4
Water and fluid mixture
TUTELA PROFESSIONAL SC 35
1.6 MultiJet 105/120 HP Prescribed fuels
and original lubricantslitres kg
Fuel tank:
including a reserve of:Engine cooling system:
Engine sump:Engine sump and filter:
Gearbox/differentialcasing:
Hydraulic brake circuit with ABS:
Windscreen/rear window
washer fluid reservoir:
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 272

TECHNICAL SPECIFICATIONS
273
6
In case of emergency, if lubricants with the prescribed specifications are not available, products with the minimum indicated ACEA
performance can be used for topping up; in this case optimal performance of the engine is not guaranteed.FLUIDS AND LUBRICANTSYour car is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements
of the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emis-
sion specifications. Lubricant quality is crucial for engine operation and duration.
PRODUCT SPECIFICATIONSUsage Fluid and lubricant specifications Genuine fluids and Replacement
for a correct use of the car lubricantsinterval
Lubricant for
diesel engines
Synthetic based lubricant SAE 0W-30 grade.
FIAT 9.55535-DS1, ACEA C2 classification.
SELENIA WR FORWARD
Contractual Technical
Reference No. F842.F13
As per the
Scheduled
Servicing Plan
The use of products with specifications other than those indicated above could cause damage to the
engine not covered by the warranty.
257-280 Delta GB 1ed 02/09/13 09.37 Pagina 273