engine Lancia Musa 2007 Owner handbook (in English)
[x] Cancel search | Manufacturer: LANCIA, Model Year: 2007, Model line: Musa, Model: Lancia Musa 2007Pages: 346, PDF Size: 5.15 MB
Page 220 of 346

219
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
WATER IN DIESEL FUEL FILTER (Multijet versions)
The warning light on the dial turns on (together with the message on
the display) when there is water in the diesel fuel filter.
c
amber
The presence of water in the fuel circuit may cause serious damage to the entire injection system
and cause irregular engine operation. If the warning light con the dial turns on, (or, on certain
versions, a dedicated message is shown on the reconfigurable multifunction display), contact
Lancia Dealership as soon as possible to have the system relieved. If the above indications come
on immediately after refuelling, water has probably been poured into the tank: turn the engine off
immediately and contact Lancia Dealership.
Warning
light on
dial Message on
multifunction
display
Page 221 of 346

220
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
Warning
light on
dialMessage on
multifunction
display
m
d
GLOW PLUGS (Multijet versions)
Turning the ignition key to MAR, the warning light on the dial comes
on and goes off when glow plugs reach the preset temperature. Start
the engine immediately after warning light switching off.
IMPORTANT With high ambient temperature, warning light stays on
for very short time. amber
amber
ASR - Wheel Antiskid System (amber)
Messages are displayed when the ASR function is
activated/deactivated manually.
ASR system switching off is indicated by the switching on of the ASR
button led.
BRAKE PAD WEAR (where provided)
The warning light on the dial turns on if the front brake pads are
worn; in this case have them changed as soon as possible.
On certain versions the dedicated message is displayed.
Page 225 of 346

224
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
Warning
light on
dialMessage on
multifunction
display
è
amberMANUAL MODE NOT AVAILABLE (amber) (where provided)
The instrument panel warning light will come on (together with the
message on multifunction display) when, with engine on and Dual
FuNction System gearbox engaged, the MANUAL mode cannot be
selected.
è
REDUCE GEARS (where provided)
Warning light è comes on (together with the message on the
multifunction display) to warn the driver of the excessive use of the
Dual FuNction System gearbox.
In this event, the system could automatically activate system
protection procedure. amber
If the warning light continues to stay on (together with the message on the multi-
function display), contact Lancia Dealership.
WARNING
Page 226 of 346

225
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
Warning
light on
dial Message on
multifunction
display
AUTOMATIC MODE NOT AVAILABLE (amber) (where provided)
The instrument panel warning light will come on (together with the
message on multifunction display) when, with engine on and Dual
FuNction System gearbox engaged, the AUTO mode cannot be
selected.
è
amber
If the warning light continues to stay on (together with the message on the multi-
function display), contact Lancia Dealership.
WARNING
Page 235 of 346

234
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
Ü
green
Warning
light on
dialMessage on
multifunction
display
CRUISE CONTROL (where provided)
The warning light on the dial comes on (on certain versions, together
with the message on the display), with the knurled ring of the Cruise
Control in the ON position, when the device starts to intervene on the
engine.
POSSIBLE PRESENCE OF ICE ON THE ROAD
When the outside temperature reaches or falls below 3°C, the
reconfigurable multifunction display will show a warning message,
symbol√will turn on and temperature indication will flash to warn
the driver of the possible presence of ice on the road. A buzzer will
also sound.
Page 237 of 346

236
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
CAR PROTECTION SYSTEM FAILURE - LANCIA CODE
Turning the key to MAR the warning light on the dial shall flash only
once and then go off. If with the ignition key at MAR the warning
light comes on with fixed light (together with the message on the
display), this indicates a possible failure (see “The Lancia Code
system” in section “Dashboard and controls”).
IMPORTANT The turning on at the same time of the
UandYwarning lights indicates a failure of the Lancia CODE system.
If with the engine running the failure message is displayed, contact
Lancia Dealership.
If with the engine running the
Ywarning light flashes, this means
that the car is not protected by the engine inhibitor device (see “The
Lancia Code system” in section “Dashboard and controls”). Contact
Lancia Dealership to have all the keys memorised.
Y
amber
Warning
light on
dialMessage on
multifunction
display
Page 238 of 346

237
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
“DUALDRIVE” ELECTRIC POWER STEERING FAILURE
(where provided)
Turning the ignition key to MAR the warning light on the dial turns
on, but it should go off after few seconds.
If the warning light stays on (together with the message on the
display), you will not have steering assistance and the effort on the
steering wheel will be increased, steering is however possible. Contact
Lancia Dealership.
DIESEL FUEL FILTER SENSOR FAILURE
The warning light on the dial comes on (together with the message on
the display) when diesel fuel filter sensor failure is detected. Contact
Lancia Dealership as soon as possible to have the fault removed.
GLOW PLUG WARMING FAILURE (Multijet versions)
The warning light on the instrument panel flashes for about 30
seconds after starting the engine (together with the message on the
display) when there is a failure in the glow plug warming system.
Contact Lancia Dealership to have the fault eliminated.
g
red
amber
amber
è
m
Warning
light on
dial Message on
multifunction
display
Page 240 of 346

239
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
EBD SYSTEM FAILURE - System unavailable
The turning on at the same time of the xand>warning lights on
the dial (together with the message on the display) with the engine
running indicates that the EBD system is inefficient or unavailable.
In this case heavy braking may cause the rear wheels to lock before
time, with the possibility of skidding.
Drive with the utmost care to the nearest Lancia Dealership to have
the system checked.
x
+
>
red
amber
Warning
light on
dial Message on
multifunction
display
Page 247 of 346

246
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
EOBD - ENGINE CONTROL SYSTEM FAILURE (petrol versions)
In normal conditions, turning the ignition key to MAR, the warning
light turns on, but it should go off when the engine has started.
The initial turning on indicates that the warning light is working
properly.
If the warning light stays on or turns on when travelling
(together with the message on the display):
❒glowing steadily- means a fault in the supply/ignition system
which could cause high emissions at the exhaust, possible lack of
performance, poor handling and high consumption levels.
In these conditions it is possible to continue driving without however
requiring heavy effort or high speed from the engine. Prolonged use of
the car with the warning light on may cause damages. Contact Lancia
Dealership as soon as possible.
The warning light goes off if the fault disappears, but it is still stored
by the system.
U
amber
8:30
continues on next page
Warning
light on
dialMessage on
multifunction
display
Page 248 of 346

247
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
❒flashing- indicates the possibility of damage to the catalyst (see
“EOBD system” in section “Dashboard and controls”).
If the light flashes, it is necessary to release the accelerator pedal to
lower the speed of the engine until the warning light stops flashing;
continue the journey at moderate speed, trying to avoid driving
conditions that may cause further flashing and contact Lancia
Dealership as soon as possible.U
amber
amber
8:30
continued from previous page
If with ignition key at MAR, the
Uwarning light does not turn on or if it turns on with fixed light
or flashing when the car is travelling (on certain versions together with the message on the display),
contact Lancia Dealership as soon as possible. Warning light
Uoperation can by checked by traf-
fic agents by proper equipment therefore, comply with laws and regulations in force in the country
where you are driving.
GENERIC FAILURE INDICATION
The warning light on the dial comes on when the engine oil pressure
sensor is faulty and, for Multijet versions with modal instrument
panel, also when a failure is detected in diesel fuel sensor. Contact
Lancia Dealership as soon as possible.
è
Warning
light on
dial Message on
multifunction
display